Force Gauges - Page 8

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: NLB-100

Introduction: The NLB series Analog Force Gauge with compact size, high accuracy, they are easy to operate and handy to carry out, and can show the unit of newton and pound at the same time. The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load test. They are excellent products which can take the place of the old style force gauges, and widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for test of pull or push load test, insertion force or pull and destructive experiment. Please read the manual carefully before using this instrument. Size: Please see the attached picture Specifications: •Model:NLB-100 •Max load:100 N/22 lbs •Min load:10N/2 lbs •Resulution:0.5 N/0.2 lbs •Rod journey:10 mm •Work temperature:20° C ± 10° C •Carry temperature:-27° C ~70° C •Relative humidity:15%~80% RH •Work environment:No vibrancy and no cautery Accessory: •Push clamp:4 •Pull clamp:1 •Added pole:1 •User's manual:1 •Check certificate:1

Manufacturer: COLE-PARMER Brand: Mark-10

Customize your wire crimp pull tester for your application Create your own fixture - ideal for odd sizes and custom terminals

Manufacturer: Jonard Industries Brand: Jonard Tools Model: GD-1

The Jonard small force gauge with flat tip measures compression (push) force in quality control, process control, testing, and calibration applications. This analog dial gauge shows the present force measured in grams (g). A pointer on the dial shows the maximum (peak) force measured over the course of a test. It has a tolerance of + or - 0.01 (reading + maximum scale reading). The gauge's arm moves in either a clockwise or counterclockwise direction and can take readings in either direction. The flat tip has measuring springs made from hard-tempered beryllium copper, for wear resistance, and can measure lower forces than a round tip. The gauge's dial measures 1.5" in diameter.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Jonard Industries manufactures hand tools for telecom, fiber optics, and electronic industries. The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances (RoHS) directives in the manufacturing of all of its products.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 546-134

The Mitutoyo peak-hold dial tension gauge measures the contact force of an instrument and a workpiece and of components such as electrical relays, micro-switches, valves, and precision springs. This analog gauge shows measurements in Newtons (N) and can display the present force measured in real time or the maximum (peak) force measured over the course of a test. It has a measurement accuracy of + or - 0.5 graduation. The fulcrum has an anti-friction bearing that helps improve measurement accuracy. The meter's body measures 1.85 x 2.17 x 0.75 inches (47 x 55 x 19 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Nextech Global Company Limited Brand: Nextech Model: DFS200

DFS-Series digital force gauges are cost-effective tension and compression testing tools. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 1.1 to 6,600 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.

Manufacturer: Mark-10 Brand: Mark-10

5 Wide Film Paper Grip These grips are designed for gripping film, paper, labels, packaging, and other thin materials for tensile and peel testing. Adjustable serrated interlocking jaws effectively grip the samples for up to 100 lbF (500N) of force. The grips are available in four sizes. Use them with a force gauge and a test stand to create a complete testing system.

Manufacturer: Mark-10 Brand: Mark-10

7 Wide Film Paper Grip These grips are designed for gripping film, paper, labels, packaging, and other thin materials for tensile and peel testing. Adjustable serrated interlocking jaws effectively grip the samples for up to 100 lbF (500N) of force. The grips are available in four sizes. Use them with a force gauge and a test stand to create a complete testing system.

Manufacturer: Mark-10 Brand: Mark-10

Opening Force Fixture Set Used to determine the opening force of flat folded cartons along their score lines. Ideal for numerous applications in the packaging, food and beverage, medical device, consumer products, and many other industries. Upper and lower fixtures are easily removable. Use this fixture with a choice of test stand and force gauge to create a complete score bend testing system. Includes: Upper die includes a 5/16-18M to #10-32F thread adapter and #10-32 M/M stud with jam nuts. Lower die includes mounting hardware for above listed test stands. Features: Set of upper lower dies provided to accommodate various sized packaging materials Fixtures are easily removable Maximum force: 50 lbF (250 N) Mounts directly to the following test stands: ESM, ESM303, ES30, TSC1000, TSF, TSFM500, ES10/ES20 (when ordered with optional AC1060 mounting plate). A motorized test stand is recommended. Weight: Upper die: 0.06 lb [0.03 kg] Lower die: 0.10 lb [0.05 kg]

Manufacturer: Shimpo Brand: Shimpo Model: FG-M10WDG500U

The Shimpo M10 thread test stand grip is an accessory for Shimpo force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M10 thread.A choice of grip styles is available. The wedge grip attachment has a 500 lb. (250 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film. The tensile grip with manually tightened, serrated jaws has a 500 lb. (250 kg) capacity for gripping large loads. The clevis grip with concave shape centers odd-shaped samples under load, including punched samples or tension springs. It has a 500 lb. (250 kg) capacity and can accommodate samples up to 0.375" (9.65 mm) wide, with a throat clearance of 0.5" (12.7 mm). The cord and twine grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. It has a throat and pin clearance of 0.375” (9.65 mm) wide, and the throat width is 0.5" (12.7 mm). The fabric grip with eccentrically mounted, serrated roller grip has a 500 lb. (250 kg) capacity and is for self- tightening of specimens up to 3" (76.20 mm) wide and 0.25" (6.4 mm) thick.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, hand...

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 2

Series 2 Economical Digital Force Gauge with #10-32 UNF Load Cell Thread, 2 lbF / 1 kgF / 10 N Series 2 digital force gauges are designed for basic tension and compression force testing applications. A backlit graphic LCD displays the current, peak tension, or peak compression reading. The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips. Includes: 9V battery Quick-start guide Resource CD Certificate of conformance Features: Calculates peak tension and compression values 3 selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Powered by 9V battery or available AC adapter Reversible housing for alternate load cell orientation Display Indicators: Force on Engineering: Reversible Housing