|
|
-
4.2 of 5.0 with 29 Reviews
SALE PRICE: $161.16 1% OFF
Manufacturer: Kanomax
Brand: Kanomax
Model: ACNA-0134
Manufacturer: Kanomax
Brand: Kanomax
Model: ACNA-0134
Kanomax auscultation rod for model 4200 vibration meter.
-
4.2 of 5.0 with 32 Reviews
SALE PRICE: $162.00 1% OFF
Manufacturer: AWS
Brand: AWS
Manufacturer: AWS
Brand: AWS
|
The AWS RDIA-25 25 Lb-in Rundown Fixture 1/4 inch Drive is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.
-
4.2 of 5.0 with 33 Reviews
SALE PRICE: $176.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 546-118
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 546-118
|
The Mitutoyo standard dial tension gauge measures the contact force of an instrument and a workpiece and of components such as electrical relays, micro-switches, valves, and precision springs. This analog gauge shows measurements in Newtons (N) and can display the present force measured in real time. It has a measurement accuracy of + or - 0.5 graduation. The fulcrum has an anti-friction bearing that helps improve measurement accuracy. The meter's body measures 1.85 x 2.17 x 0.75 inches (47 x 55 x 19 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.2 of 5.0 with 17 Reviews
SALE PRICE: $220.00 9% OFF
Manufacturer: Vetus
Brand: VETUS INSTRUMENTS
Color: Black
Manufacturer: Vetus
Brand: VETUS INSTRUMENTS
Color: Black
|
Notice: We just can send 220V American Standard plug to you . Feature : Stroboscope DT-2350P is used to measure the rotational speed of a rotating object and to inspect the defect on its surface without the need to adhere any mark to reflect the light, and thereby without the need to halt the object from its rotation. Measuring Range: DT2350PA: 50~12000FPM DT2350PB: 50~40000 FPM DT2350PC: 50~20000 FPM DT2350PD: 50~30000 FPM DT2350PE: 50~2000 FPM(fit for print and textile) Display: 5 10mmLED Accuracy: +/-(0.05%n+1d) Resolution: 0.1 FPM( Less 1000 FPM) 1 FPM(Over 1000 FPM) Sampling time: 0.3second Internal/External trigger: Convert automatically Adjust: X2, ÷2 High Low measurement range: convertable At low measurement range, lighting power is high At high measurement range, lighting power is low Amplitude external trigger signer: TTL, Level changer Power Supply: AC220V, Rechargeable cells type A Power: About 50W Operating conditions: No exedent gas and intense magnet space Temperature: 0~40C Humidity: Less than 85%RH Dimension: 215x85x180mm (8.5x3.35x7.1 inch) Weight: About 1000g / 2.2lb Only suitable for AC220V power supply , not for AC110V
-
4.2 of 5.0 with 37 Reviews
SALE PRICE: $230.05
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-365E
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-365E
|
The DT-365E’s LED technology extends operation due to the low energy requirement of the light diodes compared with xenon lit stroboscopes. Proper operation is assured as concern of light failure during usage common with xenon bulbs, is eliminated. The light output (Lux) of the LED’s is far brighter than xenon powered stroboscopes with its array of 6 LED’s. The operation panel is a vibrant red LED display that is ideal for viewing in dark locations. The simple to use keypad plus rate adjustment dial aids in making quick changes of the flash rate to coincide with changes in the speed of your process. The dial allows fine-tune altering of the flash rate while the x2/÷2 keys enable large spanning over the entire flash range. The DT-365E’s have the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery. These stroboscopes are also capable of being synchronized with an input signal. The robust aluminum housing is NEMA-4X (IP65) protected allowing usage in harsh plant environments. The DT-365E’s array of 6 LED’s allows continuous operation from 3 to 8 hours depending on user settings. Typical applications for the DT-365E are to determine speeds, inspect rotors, meshing gears, motors, textile equipment, printing production lines, conveyors, industrial fans, pump operation, vibration equipment diagnostics and many more.
-
4.2 of 5.0 with 45 Reviews
SALE PRICE: $239.08 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 546-112
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 546-112
|
The Mitutoyo standard dial tension gauge measures the contact force of an instrument and a workpiece and of components such as electrical relays, micro-switches, valves, and precision springs. This analog gauge shows measurements in Newtons (N) and can display the present force measured in real time. It has a measurement accuracy of + or - 0.5 graduation. The fulcrum has an anti-friction bearing that helps improve measurement accuracy. The meter's body measures 1.85 x 2.17 x 0.75 inches (47 x 55 x 19 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.2 of 5.0 with 40 Reviews
SALE PRICE: $249.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530862
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530862
Fluke sensor magnet mount for handheld vibration tester.
-
4.2 of 5.0 with 11 Reviews
SALE PRICE: $253.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
|
The Dwyer® Series TAC3 Pocket Tachometer measures and displays rotational speed of saw blades, grinders, engines, motors, and conveyor belts. The unique ergonomic design provides direct line-of-sight viewing of display and target. Easy-to-read 5-digit alphanumeric dual LCD also displays on-target, continuous measurement, laser and low batter indication. Measurements of up to 999,999 can be viewed with the onscreen multiplier. The Model TAC3 is a 32 function tachometer/ratemeter, totalizer/counter, and timer. It is programmable to read in English or Metric units. An input socket accepts remote sensing devices and an output socket allows for pulse output to external indicating devices. The Model TAC3 can be tripod mounted and "Locked-On" for accurate and continuous operation. This tachometer also stores minimum, maximum, and last measurement in memory. Model TAC3K Kit comes with tachometer, plastic case, remote contact assembly, concave and convex contact tips, 3.9 in. (10 cm) circumference contact wheel, NIST certification, and 5 ft (1.5 m) of reflective tape. Optional TAC3-91 Remote Optical Sensor allows this unit to measure rps, rpm, or rph in hard to reach locations.
-
4.2 of 5.0 with 23 Reviews
SALE PRICE: $268.99 1% OFF
Manufacturer: JONARD
Brand: Jonard Tools
Model: GD-3
Manufacturer: JONARD
Brand: Jonard Tools
Model: GD-3
JONARD - GD-3 - MEASURING; TENSION GAUGES
-
4.2 of 5.0 with 2 Reviews
SALE PRICE: $275.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: 15-1002
Manufacturer: Mark-10
Brand: Mark-10
Model: 15-1002
Easily transfer data from your Mark-10 gauge to common Windows applications such as Excel, Access, etc. for further analysis.
|
|