|
|
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $355.50
Manufacturer: PHASE II
Brand: PHASE II
Manufacturer: PHASE II
Brand: PHASE II
Inch Pocket Vibration Meter ...
-
4.2 of 5.0 with 10 Reviews
SALE PRICE: $356.00 11% OFF
Manufacturer: Shimpo
Brand: Shimpo
Model: FG-M6WDG50U
Manufacturer: Shimpo
Brand: Shimpo
Model: FG-M6WDG50U
|
The Shimpo M6 thread test stand grip is an accessory for Shimpo force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread.A choice of grip styles is available. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper. The spring-loaded film grip attachment with serrated jaws has a 100 lb. (45 kg) capacity. The spool grip attachment has a 100 lb. (45 kg) capacity and is for anchoring hard-to-hold items such as thread and filaments. The wedge grip attachment has a 100 lb. (45 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film. The Jacobs chuck grip attachment has a 100 lb. (45 kg) capacity and is for testing low-gauge wire and rigid rods. The flat chuck grip attachment with serrated faces has a 100 lb. (45 kg) capacity for tensile testing. The tape grip attachment with self-tightening action has a 100 lb. (45 kg) capacity for testing rubber, tape, and paper.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, lev...
-
4.2 of 5.0 with 25 Reviews
SALE PRICE: $362.50 1% OFF
Manufacturer: UNI-T
Brand: Quantong
Manufacturer: UNI-T
Brand: Quantong
|
Features: 2ã€1ã€UT310 series handheld vibration meter is designed with acceleration sensor and digital measurement circuit. 3ã€It's mainly used in measuring the vibration of mechanical equipment, velocity, and acceleration. 4ã€The measured data are compared with the national, international, corporate, machinery working standard to decide the condition (good, note or dangerous, etc.) of the machine(fan, pump, compressor, motor, etc.). 5ã€ã€Can be widely used in mechanical manufacturing, electric power, petroleum chemical industry, metallurgy, aerospace and other fields. 6ã€It's the ideal measurement tool for purchasing inspection, operation monitoring and maintenance for the rotating machinery equipment. Specifications: *Vibration Acceleration(O-P) 0.1~199.9m/s² Frequency: *response:10~1500Hz,Amplitude error:≤±5% *Amplitude linear error:≤2.0m/s²,≤±10%; >2.0m/s²,≤±5% *Vibration Velocity(RMS):0.1~199.9mm/s Frequency response:10~1500Hz , Amplitude error:≤±5% *Amplitude linear error:≤2.0mm/s,≤±10%; >2.0mm/s,≤±5% *Vibration displacement(P-P) 1 ~ 1999μm Frequency response:10~500Hz, Amplitude error:≤±5% *Amplitude linear error:≤20um,≤±10%; >20um, ≤±5% *Functions *Data Hold:√ (auto data hold when releasing the measure key) *Low battery indication:√ *Auto Power Off:√ (auto power off 1 minutes after releasing the measure key) *Display Modes:Digital display *Battery Life:Continuous measuring time > 20 hours *Maximum Display:1999 *General Characteristics *Battery:6F22 9V battery
-
4.2 of 5.0 with 26 Reviews
SALE PRICE: $369.00
Manufacturer: X-4
Brand: X-4
Manufacturer: X-4
Brand: X-4
3/4 input and 1 output 4 to 1, max output 2000 ft lbs
-
4.2 of 5.0 with 28 Reviews
SALE PRICE: $410.80 1% OFF
Manufacturer: Sper Scientific
Brand: Sper Scientific
Model: 840060
Manufacturer: Sper Scientific
Brand: Sper Scientific
Model: 840060
With this force gauge, you can measure tension or compression anywhere or mount it on the force gauge test stand and connect with software 850080 via the RS232 port for automated testing and process control. Display results right side up or upside down for compression or tension applications. The peak hold function also works in both modes. Also features a zero (tare) function, fast or slow response option, overload protection, and a low battery indicator. Comes in a protective carrying case containing an extension rod with a full line of adapters and 6 AAA batteries.
-
4.2 of 5.0 with 31 Reviews
SALE PRICE: $434.99 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: RPM10-NISTL
Manufacturer: Extech Instruments
Brand: Extech
Model: RPM10-NISTL
Photo/Contact Tachometer that features a non-contact IR Thermometer for surface temperature measurements. This product has a limited NIST Certification.
-
4.2 of 5.0 with 26 Reviews
SALE PRICE: $450.00 1% OFF
Manufacturer: Shimpo
Brand: Shimpo
Model: MF-20KG
Manufacturer: Shimpo
Brand: Shimpo
Model: MF-20KG
|
The Shimpo MF series peak-hold analog force gauge measures tensile (pull) or compression (push) forces in quality control and process control applications. This analog dial gauge shows measurements in kilograms (kg) and can display the present force measured in real time or the maximum (peak) force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has an overload capacity of 75 kg. A push button on the gauge resets the peak reading for repetitive testing applications. The gauge comes with one hook, one chisel, one flat head, one notched head, one cone head, one large hook, and one large V-hook attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The gauge's body is constructed from die-cast aluminum, which resists wear. The meter measures 9.06 x 2.36 x 2.05 inches (230 x 60 x 52 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use. It comes with a carrying case that helps protect the gauge during transport and storage.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used i...
-
4.2 of 5.0 with 37 Reviews
SALE PRICE: $456.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Electromatic Equipment
Manufacturer: COLE-PARMER
Brand: Electromatic Equipment
These digital tachometers feature high accuracy for precision measurements. The removable rubber boot provides an ergonomic, comfortable grip while protecting the meter in heavy-duty environments. Tachometers are available in optical (noncontact) or optical/contact models. Memory stores min/max, average, and last readings during measurement. A red LED helps target equipment from up to 24" (61.0 cm) away. Model 87601-03 features optical/contact measurements in rpm, three surface speed ranges, and three length measurement ranges. What's Included: reflective tape, two AA batteries, and carrying case. Model 87601-03 also includes a contact adapter, surface speed wheel and cone tip adapter and calibration document supplied by the manufacturer. Rubber boot protects meter during industrial applications Provides ±0.02% accuracy with 0.01-rpm resolution
-
4.2 of 5.0 with 46 Reviews
SALE PRICE: $470.00 1% OFF
Manufacturer: Mountz
Brand: Mountz
Manufacturer: Mountz
Brand: Mountz
The EMT12-M Adjustable Torque Screwdriver 1/4" M/Sq Drive, 2-12 lbf.in Range, 2 - 12 lbf.in Graduation is a designed to apply a set amount of torque. A bi-directional cam slips free once the set torque has been reached making over-tightening impossible.
-
4.2 of 5.0 with 24 Reviews
SALE PRICE: $479.22 1% OFF
Manufacturer: Mountz
Brand: Mountz
Manufacturer: Mountz
Brand: Mountz
Mountz TLS Pro 25 F/H
|
|