Motion, Speed & Force - Page 110

Manufacturer: COLE-PARMER Brand: Shimpo

Use these test stands with your force gauges to accurately measure materials such as wire, springs, plastic, paper cord, tubing, glass, and composites. The sturdy steel construction makes stands extremely rugged. Choose from manual or motorized test stands. The manual stands feature a lever for rapid testing applications or a hand-wheel for precise control. The motorized stands feature user programmable set points: speed, distance, and stop time. Single cycle and continuous cycling capabilities give you consistent testing parameters. Select high and low force set points through the RS-232 interface or when used with gauges with RS-232 output. Motorized stands have a four-digit, 0.41"H LED - read in inches or millimeters. Available in vertical or horizontal models to suit your application.

Manufacturer: Checkline Brand: Checkline

The MR01-1000 S-Beam Force Sensor (Load Cell), Cap. 1000 lbf / 500 Kgf / 5000 N is a rugged S-Beam force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid steel construction ensures many years of use in factory or laboratory environments.

Manufacturer: Checkline Brand: Checkline

The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm is Digital Ratchetis a torque wrench that has a forged steel ratchet head and feature a unique power sensor in The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm is ergonomic handle which accurately detects and analyzes load applied to The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm is grip to enable more precise torque measurement regardless of hand position, unlike o The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm isr loading point sensitive wrenches. Digital Adjustable Torque Wrenches expand torque applications to places where a socket wrench cannot work. The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm isy feature forged steel jaws and a unique power sensor in The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm is handle which accurately detects and analyzes load applied to The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm is grip, regardless of hand position and specially designed jaws that maintain a constant working length whe The Checkline GEK085-W36E Digital Adjustable Wrench - 17 - 85 Nm isr open or closed, to enable more precise torque measurement.

Manufacturer: SHIMPO Brand: Shimpo Model: ST-328-RC-1-230V

The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10” (260 mm) to 71” (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.

Manufacturer: VETUS INSTRUMENTS Brand: VETUS INSTRUMENTS Color: White

Function Characteristics: 1. High precision, high resolution. 2. Five kinds of test modes, three kinds display modes---To improve test efficiency to the greatest extent. 3. N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion. 4. Gravity acceleration setting function---Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate. 5. Peak holding function---Maintain peak display until manual reset. 6. Automatic peak function---Maintain peak value can be removed automatically after 2 seconds. 7. Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm. 8. Data stored function, we can store 896 test values. 9. 10 minutes without operating automatic shutdown, green initiative. 10. High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function. 11. 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using. 12. Six digit Big screen display. Parameter: Item No. Rope Diameter (mm) HD-1T Φ 6~Φ 14 HD-2T Φ 10~Φ 18 HD-5T Φ 16~Φ 26 HD-10T Φ 24~Φ 36 HD-20T Φ 24~Φ 36

Manufacturer: Shimpo Brand: Shimpo Model: DT-315AEB

The Shimpo DT-315AEB battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes, and time and phase shift to provide stop-motion or slow-motion viewing of moving machinery. It is used for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 40 microsecond flash duration for crisp images in brightly lit areas and a flash timer conserves flash tube life. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. A high-polish focused reflector eliminates blind viewing areas. Internal and external trigger modes have a 0 to 35,000 flashes per minute (FPM) range and an accuracy of + or - 0.01%, or + or - 1 digit. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. External mode has a phase shift range of 0 to 360 degrees in one-degree increments and a time delay of 0 to 2,000 milliseconds (msec) at speeds between 40 and 10,000 FPM. Time delay and phase shift enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The stroboscope can be powered by an external battery pack for extended use. The battery pack is rechargeable using the 115V AC recharger (included). An integrated mounting thread and continuous duty cycle allow long-term use without the need for cool-down periods. The aluminum housing provides durability. The stroboscope includes a flash tube removal tool, a handle, external battery pack, 115V AC battery charger/adapter, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, educa...

Manufacturer: Mark-10 Brand: Mark-10 Model: Series R51

Series R51 Plug TestTM technology. Designed for clockwise and counter-clockwise torque testing. The sensor may be handheld or mounted to a test stand, fixture, or other equipment. Bits or fixtures may be placed in the chuck, although extra care should be taken when handling low capacity models. Includes: NIST-traceable certificate of calibration with data included Features: Member of the Plug Test family of interchangeable sensors and indicators Outstanding overload protection Interchangeable chucks (order separately) Accuracy: 0.20% of full scale + indicator Weight: From 1.4 lb (0.6 kg) Warranty: 3 years Unique Plug TestTM technology allows for interchangeable sensors to be used with a Mark-10 indicator. All calibration and configuration data is saved in the smart connector. The Plug TestTM connector locks into the receptacle in the indicator when fully inserted. Dual buttons on the indicator housing release the connector for easy removal. Gold plated spring contacts ensure long lasting and reliable connection. Series R51 feature unique interchangeability with three chuck attachment sizes as well as a bit holder. The attachment is mated to the main sensor body with a pin, while a threaded ring holds the attachment in place.

Manufacturer: Mark-10 Brand: Mark-10 Model: Series R02

Series R02 Plug TestTM technology. Includes: NIST-traceable certificate of calibration with data Features: Member of the Plug Test family of interchangeable sensors and indicators Small size Stainless steel construction 150% of full scale safe overload Accuracy: 0.15% of full scale + indicator Weight: 0.4 lb (0.2 kg) Warranty: 3 years Unique Plug TestTM technology allows for interchangeable sensors to be used with a Mark-10 indicator. All calibration and configuration data is saved in the smart connector. The Plug TestTM connector locks into the receptacle in the indicator when fully inserted. Dual buttons on the indicator housing release the connector for easy removal. Gold plated spring contacts ensure long lasting and reliable connection.

Manufacturer: Mark-10 Brand: Mark-10

6 [150 mm] travel model, 0.0005 [0.01 mm] resolution, 0.001 [0.03 mm] accuracy, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz.

Manufacturer: Checkline Brand: Checkline

The MR02-10000 Rugged S-beam Compression Force Sensor, Cap. 10000lbf / 5000 Kgf / 50000 N is a button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints.