Motion, Speed & Force - Page 136

Manufacturer: Mark-10 Brand: Mark-10 Model: 15-1004

MESURTMgauge captures load and travel data, graphs load vs. time or travel, calculates statistics, and offers a range of features including one-button export to Excel, customizable reports, configurable test parameters, and more

Manufacturer: Mark-10 Brand: Mark-10 Model: G1061

Heavy-duty grips designed for a range of tensile testing requirements up to 2000 lbF [10 kN]. Self-tightening serrated jaws engage the sample through a spring loaded knob and rack and pinion type mechanism. The jaws ride on rollers, eliminating jamming common in conventional wedge grips.

Manufacturer: COLE-PARMER Brand: Monarch Instrument

Sensor pack. Includes accelerometer 98834-74, magnetic base 98834-77, connecting stud 98834-81, and stinger 98834-84

Manufacturer: Tohnichi Brand: Tohnichi Model: 2400ATG-S

Analog Torque Gauge

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6235-011

The Monarch 6235-010 PLS pocket LED stroboscope has internal and external modes, time delay, phase shift, and a NIST Certificate of Calibration, and provides inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 7-array LED light source has a light output of 1800 lumens at 6000 flashes per minute (FPM) eight inches from the lens. Adjustable flash duration of 0.1 to 18 degrees or 0.5 to 2500 microseconds. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The internal flash mode has a range of 30 to 300,000 FPM and 0.5 to 5,000 hertz (Hz) and has an accuracy of 0.005% of setting, or + or - last digit. The external flash mode has a range of 0 to 300,000 FPM, 0 to 5000 Hz and accuracy of + or - 0.005% of reading, or + or - last digit. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 30 to 300,000rpm (requires remote sensor, not included). Phase shift of 0.1 to 18 degrees of rotation and time delay of 0.5 to 2500 microseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. A continuous duty and integrated 1/4" - 20 UNF (Unified Fine) thread mount enables the stroboscope to be used continuously over the life of the battery. Five user-selectable flash rates can be programmed into the device and recalled after powering off. The stroboscope is powered by 3.6V DC internal...

Manufacturer: Shimpo Brand: Shimpo Model: DT-900

The Shimpo DT-900 battery-operated digital stroboscope has a xenon light source, internal and external trigger modes, and phase shift and time delay features. It provides stop-action or slow-motion viewing of moving machinery for visual inspection of covered gear teeth, shafts, print media, and various injector patterns. The xenon flash tube has a 9 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a range of 40.0 to 12,000 flashes per minute (FPM) and an accuracy of + or - 0.5% FPM, or + or - 0.01% of reading, whichever is greater. The tachometer mode has a speed measurement range of 40 to 59,000 RPM and an accuracy of + or - 0.5% FPM, or + or - 0.01% of reading, whichever is greater. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The 8-digit 2-line LCD display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread allows the stroboscope to be mounted on a tripod for long-term use. The rechargeable NiMH battery has a life span of 1.24 to 2.5 hours, depending on flash rate and can be removed for recharging using the 120V AC adapter (included). The housing is comprised of impact and oil-resistant polycarbonate for durability. The stroboscope includes a NiMH rechargeable battery, 120V AC charging adapter, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash range and accuracy40 to 12,000 FPM, with accuracy + or - 0.5% FPM or + or - 0.01% of reading, whichever is greaterTachometer range and...

Manufacturer: Hoto Instruments Brand: Hoto Instruments Model: ESL-200

Overview ESL-200 is a super bright, battery operated, LED stroboscope designed to measure and observe rotating, reciprocating and linear motion in a variety of production, quality control and academic applications. It generates an extremely bright light relative to its compact size. Digital phase shift adjustment by 1° increments

Manufacturer: COLE-PARMER Brand: Mark-10

Increase the vertical clearance for tall samples. Configurable for your application needs!

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6204-012

The Monarch 6204-012 Nova-Strobe dbx battery-powered digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in FPM (flashes per minute) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope is powered by 6V DC internal rechargeable batteries with an operating time of approximately 60 minutes at 6000 FPM. It includes a NIST Certificate of Calibration and a universal charger with USA, U.K., AUS, and EURO wall plugs. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6232-010

The Monarch 6232-010 PBL battery–operated, portable stroboscope has a 12-array LED light source, internal and external trigger modes, a 30 to 500,000 flashes/revolutions-per-minute (FPM/RPM) range, and a continuous duty cycle to provide stop-motion inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 12-array LED light source has an adjustable flash duration up to 14 degrees or 3000 microseconds and a light output of 3000 lux. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The flash rate range of 30 to 500,000 FPM/RPM has an accuracy of 0.002% of setting, or + or - 1 least-significant digit/0.01 FPM. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200,000 rpm and an accuracy of + or - 0.01% or 0.1 rpm (remote sensor not included). External phase shift of 0.1 to 359.9 degrees and time delay range of 0.001 to 1000 milliseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. Manual internal phase shift allows the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope can be powered by the internal NiMH rechargeable batteries or using the universal 115/230V AC power supply/recharger. The continuous duty cycle and the 115/230V AC power supply allow the stroboscope to be used continuously without the nee...