Motion, Speed & Force - Page 141

Manufacturer: Cedar Brand: Cedar

The DIS-IP50 Digital Torque Tester with Flanged Remote Sensor, Capacity 440 lbf-in/ 500 kgf-cm/ 5000 N-cm/ 50 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Cedar Brand: Cedar

The Cedar DIS-IP200 Digital Torque Tester with Flanged Remote Sensor, Capacity 1740 lbf-in/ 145 lbf-ft/ 20 kgf-cm/ 200 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Shimpo Brand: Shimpo Model: TTC-I-50 Color: Blue

The TTC Digital Torque Tool Tester is a simple operation test instrument for quickly checking torque tool performance up to 800 N-m (590 ft-lb). The TTC Series provides exceptional accuracy for measuring torque on various products including torque wrenches, manual screwdrivers, electric screwdrivers, Pneumatic screwdrivers, and other torque controlled power tools.

Manufacturer: Mark-10 Brand: Mark-10

The Mark-10 TORQ-T-12 Digital Torque Tester for Hand Tools, Capacity 12 lb-in, 2200V is a simple yet accurate solution for testing torque screwdrivers, wrenches, and non-motorized torque tools. Applications exist in manufacturing facilities in virtually every industry. It features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The TORQ-T captures peak torque in both clockwise and counterclockwise directions.

Manufacturer: SHIMPO Brand: Shimpo Model: TTR-25

The TTR Digital Torque Tool Tester is a simple operation test instrument for quickly checking torque tool performance with ±0.5% reading accuracy. The TTR Series provides an exceptional ±0.5% of reading accuracy for measuring torque on various products including torque wrenches, manual screwdrivers, electric screwdrivers, pneumatic screwdrivers and other torque controlled power tools.

Manufacturer: SHIMPO Brand: Shimpo Model: TTR-10

The TTR Digital Torque Tool Tester is a simple operation test instrument for quickly checking torque tool performance with ±0.5% reading accuracy. The TTR Series provides an exceptional ±0.5% of reading accuracy for measuring torque on various products including torque wrenches, manual screwdrivers, electric screwdrivers, pneumatic screwdrivers and other torque controlled power tools.

Manufacturer: Mark-10 Brand: Mark-10 Model: MTT03-10Z

Series TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges’ rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements. Series TT03 features a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output of individual data points is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates single point data. One-click export to Excel allows for further data manipulation.

Manufacturer: SHIMPO Brand: Shimpo Model: FG-7000T-3

The FG-7000T Series digital torque gauges provide testing flexibility with their external torque sensor input. Torque sensors with standard chuck adapter are immediately recognized when connected to the display base and are available for your specific testing needs in 1 N-m (9 in-lb.) 5 N-m (44 in-lb.), 10 N-m (88 in-lb.) capacities.

Manufacturer: AWS Brand: AWS

The TT-QC-250f-1/2 Digital Torque Tester, Range 25 - 250 Lb-ft, Drive Size 1/2" is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: Tohnichi Brand: Tohnichi Model: ATGE20CN-G

Digital Torque Gauge for low capacity torque testing and measuring. Optional Stand #809, Optional Test Fixture #800, Optional Download Cable/software #384