Motion, Speed & Force - Page 142

Manufacturer: Mark-10 Brand: Mark-10

TheTT03 Digital Torque Gauge is a rugged solution for most torque measurement applications. A dedicated remote torque sensor with a Jacobs chuck can be used to grip a sample or fixture.

Manufacturer: AWS Brand: AWS

The AWS RDFA-2000 2000 Lb-ft Rundown Fixture 1.5 inch male to 1 inch female is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Manufacturer: Cedar Brand: Cedar

The DIS-IP500 Digital Torque Tester with Flanged Remote Sensor, Capacity 4400 lbf-in/ 362 lbf-ft/ 50 kgf-cm/ 500 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Mountz Brand: Mountz

The BMX50i Torque Reaction Transducer, Range 5 - 50 Lb-in, Drive Size 1/4" is ideal for calibrating hand screwdrivers, wrenches, and power tools.

Manufacturer: Imada Brand: Imada Model: HTGS-40L-120V

The HTGS Digital Torque Gauge features a remote torque sensor with a Jacob's chuck. The Jacob's chuck can be used to grip a test sample or a wide variety of grips. Test in clockwise or counter-clockwise directions. Selectable measuring units of lbf-in, kgf-cm, or N-cm. The HTGS torque tester features easy to use menus to make programming the gauge simple. Select units, reverse the display, set high/low setpoints, and set all other functions using plain language menus. Electro luminescent EL display shows torque value, unit, and peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, angle value (using HTGA model), etc. The HTGS also has a set of 3 indicator lights. The orange, green and red indicator lights can be used in conjunction with the programmable high/low setpoints for pass/fail testing. Color-coded LED indicators alert the user to Go/NoGo conditions. Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. All new HTGS gauge includes the device driver and ZT Logger data acquisition software. ZT?Logger can download data from the gauge memory or capture a continuous stream of data at 10 data/second. Zero the gauge or capture data while at the computer. All gauge programming can be set and saved from the software. Optional Force Recorder Data Acquisition Software is designed to capture up to 2,000 data per second. No competitors' gauges come close to this speed! Other functions include, gauge programming, graph overlay feature, automatic statistics generation.

Manufacturer: Mark-10 Brand: Mark-10

The CAP-TT03-100 Hand-held Cap Torque Meter With Data Output, Cap. 100 lbf-in / 1150 N-cm, Complete Kit is designed to measure the open and closure torque on bottles, vials, jars and more. This portable instrument is ideal for odd shaped containers that cannot be secured in traditional table top testers. Serrated jaws securely grip cap diameters of 0.65 - 1.55 in (16.5 - 39.0 mm). Measure Peak or real-time torque on the large back lit LCD display (clockwise and counter-clockwise directions). The Series TT03C is available in three capacities from 12 lbf-in / 135 N-cm (MTT03C-12), 50 lbf-in / 570 N-cm (MTT03C-50) & 100 lbf-in / 1150 N-cm (MTT03C-100). The CAP-TT03 features a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates single point data. One-click export to Excel allows for further data manipulation.

Manufacturer: Mountz Brand: Mountz

Mountz MTS 35 Dial Torque Analyzer

Manufacturer: AWS Brand: AWS

The AWS ILTT-500i Inline Digital Torque Tester for Quick Tool Verification, Range 50 - 500 LB-in, Drive Size 3/8 in is used to convert any non-impacting torque tool into a complete torque measuring & analyzing system, simply connect the tester to the square drive, attach a socket and measure clockwise or counter-clockwise torque. Suitable for use with any hand tool or non-impacting power tool including torque wrenches, breaker bars, nut-runners and more. Internal NiMH rechargeable batteries provide 8-10 hours continuous use.The ILTT takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking and Auto Clear.

Manufacturer: Imada Brand: Imada Model: DTXS-40-230V

The EL display is visible in dark and light locations and shows torque value, unit, peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, etc. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high. Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second. ZT?Logger data acquisition software downloads data from the tester memory or captures continuous data at 10 data/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software. All DTXS cap torque testers include a 3 Point Certificate traceable to NIST. DTXS cap torque testers include AC adapter/charger, USB Cable, Driver CD, built-in Ni-MH rechargeable batteries, 1? high standard pegs (optional long pegs, calibration kit and ISO Calibration available).

Manufacturer: Mountz Brand: Mountz

MTX 10z Torque Sensor (1-10 ozf.in) ARCII