Motion, Speed & Force - Page 150

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6203-010

The Monarch 6203-010 Nova-Strobe dax 115V AC digital stroboscope with xenon flash tube, internal and external trigger mode, and internal phase shift displays rate in flashes per minute (FPM) or flashes per second (Hz). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Internal and external trigger modes have a flash rate range of 30 to 20,000 FPM. Internal flash rates can be adjusted in 0.1 step increments using the coarse/fine adjustment knob. A digital microprocessor keeps readings accurate. Built-in multiply-by-2 and divide-by-2 push buttons allow the operator to distinguish actual rpm from harmonic frequencies, and provides stop-motion viewing beyond the 20,000 FPM limit. Tachometer mode measures speed up to 250,000 rpm with external sensor (not included). Separate transistor-transistor logic (TTL) input and output jacks (1/8" phone) provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has a 20 to 50 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Continuous duty cycle and built-in threaded mount allow the stroboscope to be mounted for long-term use without cool-down periods. Data storage and recall for up to six user-selectable values and last measurement memory are retained even after power-off. The stroboscope includes a NIST Certificate of Calibration. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsUnitsFPM, HzFlash rate range30 to 20,000 FPMTachometer range5 to 250,000 RPM, + or - 0.001% of reading (requires external sensor, not included)Flash rate resolution0.01 to 1 FPM (menu selectable...

Manufacturer: JONARD Brand: Jonard Tools Model: GD-50

JONARD - GD-50 - TENSION GAUGE

Manufacturer: COLE-PARMER Brand: SPM Instrument

vibration-meters

Manufacturer: Shimpo Brand: Shimpo

The Shimpo DT-205LR-S12 is a battery operated, microprocessor controlled, non-contact/contact tachometer that utilizes laser beam for movement detection. In the non-contact mode a laser beam measures RPM when directed towards a shaft (or any other rotating mechanism marked with a small piece of reflective tape). The included DT-ADP-200LR adapter allows for contact measurement via a rubber tip cone attachment or the included wheel attachment.

Manufacturer: Shimpo Brand: Shimpo Model: FGE-50XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Manufacturer: Shimpo Brand: Shimpo Model: FGE-50XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Manufacturer: COLE-PARMER Brand: SPM Instrument

This portable bearing checker is designed for fast and easy measurements of bearing conditions-ideal for preventive maintenance programs and eliminating costly repairs. The built-in probe measures shock pulses on bearings and instantly displays a green, yellow, or red LED status light indicating bearing damage and severity. Unit provides storage of up to 10 measurement values with transducer line testing capabilities. Use as an electronic stethoscope for detecting irregular machine sounds and measure machine temperatures with the built-in infrared feature. The intuitive push-button control allows for easy setup and operation. Select imperial or metric units of measurement. The durable IP54- rated design and sealed membrane keypad are perfect for industrial applications. This instrument is a must for plant mechanics, machine operators, and maintenance technicians. What's Included: instruction CD. Increase machine reliability and lower maintenance costs Metric or imperial units of measurement Language independent menus with symbols Storage of up to 10 measurement values Conducts transducer line test Built-in infrared light measures machine temperatures Use as an electronic stethoscope for detecting irregular machine sounds Durable IP54 rated design for industrial environments Increase machine reliability and lower maintenance costs

Manufacturer: Mark-10 Brand: Mark-10 Model: Series R01

Series R01 Plug Test technology. Features: Member of the Plug Test family of interchangeable sensors and indicators Measures tensile and compressive forces NIST-traceable certificate of calibration with data included Accuracy: 0.15% of full scale + indicator Warranty: 3 years

Manufacturer: Imada Brand: Imada

Imada DS2 digital force gauges with capacities from 7 oz to 220 lbs. RS232, digimatic and analog outputs with programmable high and low setpoints and push button selectable lb, kg and Newton units. Reversible display and ergonomic, durable, heavy duty con

Manufacturer: Shimpo Brand: Shimpo Model: FGE-10XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.