|
|
-
3.9 of 5.0 with 12 Reviews
SALE PRICE: $740.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R51
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R51
|
Series R51 Plug TestTM technology. Designed for clockwise and counter-clockwise torque testing. The sensor may be handheld or mounted to a test stand, fixture, or other equipment. Bits or fixtures may be placed in the chuck, although extra care should be taken when handling low capacity models. Includes: NIST-traceable certificate of calibration with data included Features: Member of the Plug Test family of interchangeable sensors and indicators Outstanding overload protection Interchangeable chucks (order separately) Accuracy: 0.20% of full scale + indicator Weight: From 1.4 lb (0.6 kg) Warranty: 3 years Unique Plug TestTM technology allows for interchangeable sensors to be used with a Mark-10 indicator. All calibration and configuration data is saved in the smart connector. The Plug TestTM connector locks into the receptacle in the indicator when fully inserted. Dual buttons on the indicator housing release the connector for easy removal. Gold plated spring contacts ensure long lasting and reliable connection. Series R51 feature unique interchangeability with three chuck attachment sizes as well as a bit holder. The attachment is mated to the main sensor body with a pin, while a threaded ring holds the attachment in place.
-
3.9 of 5.0 with 35 Reviews
SALE PRICE: $741.81
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
|
Flash Range: 30 - 12,500 RPM/FPM The PK2X hand-held Pocket Strobe® is convenient and accurate device to perform non-contact RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts/machinery by "freezing" or "slowing down" the action. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. A slow motion effect is accomplished with a slight mismatch of the relative speeds. The PK2X is powered by a rechargeable internal battery or directly from an AC power source allowing for continuous use if necessary, or continued use when the battery charge is low. It small size, lightweight design makes it perfect for use by field technicians or maintenance personnel. The new PK2X offer significant improvements from the previous generation model PK2 including the following (refer to table below): • 50% improvement in flash brightness • 100% improvement in battery run-time • Doubles the choice of power by permitting operation during re-charge or continuous operation when connected to AC-power This new model continues to offer the highest reliability, refined by over 10-years of continuous design & manufacturing improvements since the introduction of the original Pocket Strobe Model PK1 was introduced in 1996. The PK2X requires only one hand to operate, yet delivers performance comparable to much larger and heavier "pistol-grip" type models. It is ideal for industrial, laboratory, R&D and academic environments. Its small size and excellent performance provide superior convenience and value - at a reasonable price. Includes Strobe, Universal AC-Adapter/Charger and External Trigger Jack in Carrying Case with Traceable Calibration Certificate. With optional Trigger Output Signal and Jack. With "neutral" product marking instead of CHECK•LINE.  Features Internal rechargeable Lithium Ion battery uses latest "smart-charge" technology for
-
3.9 of 5.0 with 13 Reviews
SALE PRICE: $751.00 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
The FMI-S20C1 Solar Powered Digital Force Gauge, Capacity 100 N is based on their own power supply by the solar cell especially for mobile use in quality control and for the measurement of tear or rupture forces in the industrial environment suited. The extremely robust sensor module is integrated in the housing such that an optimal overload protection is accomplished by up to 500%. The measured values are in a big screen displayed either in the SI unit of Newton or in units of weight. The force or pressure for train is on the M6-wave measurement, standard adapters are included. For test stand mounting threads are provided on the housing. The simple application of the meter FMI-S20 in combination with a high accuracy and affordability are hallmarks of this instrument.
-
3.9 of 5.0 with 20 Reviews
SALE PRICE: $755.00 3% OFF
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-725KIT-230V
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-725KIT-230V
|
The Shimpo DT-725KIT-230V battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes and a continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a 40.0 to 12,500 flashes per minute (FPM) range and an accuracy of + or - 0.02% of reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The 5-digit, 8mm tall LED display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) mounting thread and continuous duty cycle provide permanent installation and long-term use without the need for cool-down periods. The high-impact plastic housing provides durability. The stroboscope includes a 230V AC battery adapter, a spare flash tube, carrying case, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash range and accuracy40.0 to 12,500 FPM, with + or - 0.02% of reading accuracyResolution0.1 FPM at 40.0 to 4,999.9 FPM 0.2 FPM at 5,000 to 7,999.9 FPM0.5 FPM at 8,000 to 9,999.5 FPM1 FPM at 10,000 to 12,000 FPMRate multiplier/dividerMultiply-by-2 and divide-by-2Phase shiftPush buttons shift 360 degrees in 6 secondsLight source10W xenon flash tub...
-
3.9 of 5.0 with 35 Reviews
SALE PRICE: $755.25 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: MR50-100
Manufacturer: Mark-10
Brand: Mark-10
Model: MR50-100
Series R50 smart sensors measure bi-directional torque for a wide variety of applications across virtually all industries. Contain a Jacobs chuck for up to 0.5 in [12.7 mm] diameter samples, bits, or fixtures. The sensors can be used as hand held devices, or mounted to a test stand. Capacities available from 10 ozFin to 100 lbFin [7 to 1150 Ncm]. Compatible with Mark-10 model 5i and 3i indicators (sold separately) through unique Plug & Test technology.
-
3.9 of 5.0 with 37 Reviews
SALE PRICE: $756.50 1% OFF
Manufacturer: COLE-PARMER
Brand: J.H. Williams Tool Group
Manufacturer: COLE-PARMER
Brand: J.H. Williams Tool Group
This is a small compact and accurate electronic meter capable of acquiring data from a variety of torque sensors and logging values into memory. It has been designed to be used for torque verification in assembly and manufacturing. The unit can be used for auditing and process reporting while giving statistical process control (SPC) of stored data. It can can also be used with in-line transducers resulting in the accuracies associated with assembling with an electronic torque wrench.
-
3.9 of 5.0 with 8 Reviews
SALE PRICE: $760.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: M3-012
Manufacturer: Mark-10
Brand: Mark-10
Model: M3-012
Series 3 basic digital force gauges feature a sampling rate of 2,000 Hz and ±0.3% accuracy, ideal for numerous applications in virtually every industry. Set point indicators with outputs are useful for visual pass/fail testing, while an analog load bar provides graphical representation of applied load. Ultra-compact, reversible housing allows for flexibility in many mounting configurations with space constraints.
-
3.9 of 5.0 with 9 Reviews
SALE PRICE: $760.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: M3-05
Manufacturer: Mark-10
Brand: Mark-10
Model: M3-05
Series 3 basic digital force gauges feature a sampling rate of 2,000 Hz and ±0.3% accuracy, ideal for numerous applications in virtually every industry. Set point indicators with outputs are useful for visual pass/fail testing, while an analog load bar provides graphical representation of applied load. Ultra-compact, reversible housing allows for flexibility in many mounting configurations with space constraints.
-
3.9 of 5.0 with 7 Reviews
SALE PRICE: $771.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Mark-10
Manufacturer: COLE-PARMER
Brand: Mark-10
FEATURES Compatible with test stands and grips Battery or AC operation Selectable units of measurement Reversible aluminum housing for hand use or stand mounting Peak memory for tensile or compression loads Programmable automatic shut-off Programmable default configuration Push-button calibration IPM - Intelligent Power Management system Same housing size for capacities from 0.25 lb (1N)to 500 lbs(2500 N) Accuracy: ±0.5% of full scale ±1 digit Weight: 0.7 lbs (0.3 kg) Sampling rate: 30 readings p/sec One year warranty
-
3.9 of 5.0 with 47 Reviews
SALE PRICE: $775.00
Manufacturer: SHIMPO
Brand: Shimpo
Model: ST-328-IC-2-230V
Manufacturer: SHIMPO
Brand: Shimpo
Model: ST-328-IC-2-230V
|
The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10†(260 mm) to 71†(1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.
|
|