Motion, Speed & Force - Page 169

Manufacturer: Mountz Brand: Mountz

The BMX250i Torque Reaction Transducer, Range 25 - 250 Lb-in, Drive Size 1/4" is ideal for calibrating hand screwdrivers, wrenches, and power tools.

Manufacturer: Checkline Brand: Checkline Model: TT-30100

Range: 100.0 - 1000 Lb-inDrive Size: 3/8"Run-Down Fixture: IncludedThe TT-3000 Series Torque Analyzers are designed specifically for the needs of today's production facilities. These powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic. Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.

Manufacturer: AWS Brand: AWS

The AWS TT-3025 Digital Torque Tester, Range 25.00 - 250.0 Lb-in, Drive Size 3/8" is designed specifically for the needs of todays production facilities. These powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic.Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.

Manufacturer: Cedar Brand: Cedar

The Cedar i-8 Torque Tester for Power Drivers & Wrenches, Complete Kit, Capacity 7 lbf-in/ 8 Kg-cm/ 80 N-cm, 220V is ideal for calibrating electric screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter.Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.

Manufacturer: Imada Brand: Imada

The CAP-HT-15-RS Hand-held Cap Torque Tester with Data Output, Cap. 15.00 lbf-in / 20.00 Kg-cm/ 200.00 N-cm is an instrument that offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint. This Cap Torque Tester stores up to 1,000 values in memory, which can be displayed or transmitted using serial output.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6480-033

Hex Socket Connecting Stud 4-28 x 1/2 Inch

Manufacturer: Shimpo Brand: Shimpo Model: DT-CARRY100

DT series handheld tachometer. For DT-105ADT-107ADT-205L and DT-207L tachometer. Pack of 1.

Manufacturer: LYWS Brand: LYWS

Power requirement: DC 8-15V Measure range : 5-9999RPM. Clear zero: Automatic. Clear zero time: about 10s.the greater the RPM value,the longer the clear zero time. Refresh frequency: 0.2-0.5S while 120-1200RPM;0.25-0.06S while 2400-9999RPM. Measure indication:RPM5000,±3. Display:RED 0.56" LED Sign:Pusle signal,Hall NPN 3 wires normally open. Hall proximity model:NJK-5002C Appearance:M12mm cylinder. Detection range: 10mm Proximity output current: 200mA Detected objects: magnet Response frequency: 100HZ Tachometer dimension:72x36x20mm,panel cutout Dimension:68x33mm. Sensor dimention: M12x10x55mm. Wiring: (Sensor's Brown + Meter's Red) + Power Positive. (Sensor's Blue + Meter's Black) + Power Negative. (Sensor's Black + Meter's Yellow) = Signal terminal. Operating temperature: 0 to 50°C. Packaging include： 1x Tachometer 1x Hall NPN proximity sensor w/ magnet

Manufacturer: MONARCH INSTRUMENT Brand: Monarch Instrument

(T5) 1/2" X 5' reflective tape. 1/roll.

Manufacturer: WHDZ Brand: WHDZ

Feature: Wide measuring range & high resolution Digital display gives exact RPM with no guessing or errors The last value/max, value/rain, value will be automatically stored in memory and can be displayed by turn anytime The use of durable, long-lasting components, including a strong, light weight ABS-plastic housing assures maintenance free performance for many years. The housing has been carefully shaped to fit comfortably in either hand. Specification: Display：5 digits, 18mm (0.6-inch LCD screen) Test Range：2.5 to 99,999 RPM (r/min) Resolution：0.1 RPM (2.5 to 999.9 RPM) 1 RPM (over 1,00O RPM) Accuracy：(0.05%+1 digit) Sampling Time：0.8 sec.(over 60 RPM) Test Range Select：Automatic Memory：Last value, Max. Value,Min. Value Detecting Distance：50 to 500 mm Time Base： 6MHz Quartz crystal Sampling time：0.5sec（over 120 RPM） Range select：auto range Circuit：Exclusive one-chip of microcomputer LSI circuit. Battery： 4 * 1.5V AA Power Consumption：Approx. 35mA (LED) Approx. 30mA (Laser) Operation Temp.：0 to 50°C(32 to 122°F) Size：160 x 73 x 470 mm Weight：134g ( battery not indlucled) Package include: 1* Digital Tachometer 3 x Reflecting tape marks 1 x User manual