Motion, Speed & Force - Page 206

Manufacturer: Cedar Brand: Cedar

The DIS-IP5 Digital Torque Tester with Flanged Remote Sensor, Capacity 44 lbf-in/ 50 kgf-cm/ 500 N-cm/ 5 N-m, 110V is used to calibrate torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Use the 800 internal memory for peak data recall or USB downloadfor analysis by Imada data acquisition software SW-1SV-USB. Calibrateyour own torque wrenches and electric drivers and and save down time.

Manufacturer: Imada Brand: Imada Model: DTXS-85-230V

The EL display is visible in dark and light locations and shows torque value, unit, peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, etc. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high. Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second. ZT?Logger data acquisition software downloads data from the tester memory or captures continuous data at 10 data/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software. All DTXS cap torque testers include a 3 Point Certificate traceable to NIST. DTXS cap torque testers include AC adapter/charger, USB Cable, Driver CD, built-in Ni-MH rechargeable batteries, 1? high standard pegs (optional long pegs, calibration kit and ISO Calibration available).

Manufacturer: Sun Company Brand: SUN

This amazing item includes: Altimeter, barometer, compass and thermomether. Also has a detachable LED light and a signal mirror

Manufacturer: Woodcraft Supply Brand: WeCheer

Ideal for detailing and intricate carving, this powerful high-torque hand piece features variable speed, so you can always be operating at the optimum speed required by your bit or type of stock. Because the motor is built into the hand piece, there is no flexible shaft to restrict your movements, and you can carve at any angle without worrying about damaging a flexible shaft. The lightweight body and cord allow you to carve longer, more comfortably, and with greater accuracy. At only 6-1/4" long and 1" diameter, it fits comfortably in the hand and is light enough to be held like a pencil. Variable speed: 3,000 to 23,000 RPM. Includes 1/8" and 3/32" collets.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-034

Set (2) mating 1/8" stereo plugs (to provide TTL signal and sensor power), Model: C-4027

Manufacturer: Shimpo Brand: Shimpo Model: FPM-12

Measuring wheel for contact linear rate and length measurement. 12" circumference. Pack of 1.

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: RPM40

The RPM40 is a pocket contact or laser photo tachometer which provides wide RPM (photo/contact) and Linear Surface Speed measurements. Characters on display reverse direction depending on measurement mode used. The narrow beam Laser photo tachometer is for accurate non-contact RPM measurements up to 4.9ft (1.5m) from the target for improved safety and accessibility. Complete with cone tip and wheel for rpm or linear surface speed, four 1.5V AAA batteries and reflective tape.

Manufacturer: Reed Brand: REED Instruments Model: K4020

This digital stroboscope freezes the motion and measures the speed of a rotating object, without contact. The K4020 features flash rate speeds from 100 to 10,000 rpm, a xenon light bulb and bright LED display.

Manufacturer: Extech Instruments Brand: Extech Model: 461830

Manufacturer: Reed Brand: REED Instruments Model: K4020-230V

The Reed K4020 series AC-powered digital stroboscope has a xenon flash tube, and a 100 to 10,000 flashes/revolutions per minute (FPM/RPM) flash rate and is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The xenon flash tube provides crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a 100 to 10,000 FPM/RPM range, and a 1X/second sampling rate. An integrated micro-ship provides an accuracy of + or - 1% at 100 to 5,000 FPM/RPM, and + or - 0.05% for speeds over 5,000 FPM/RPM. The 4-digit LED readout has a 1 FPM/RPM resolution. The stroboscope has a 5 to 30 minute duty cycle for short to moderate time use and an integrated tripod mount for hands-free use. The plastic-injection case and plastic lens are durable for mobile applications. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash range100 to 10,000 FPM/RPMAccuracy+ or - 1% at 100 to 5,000 FPM/RPM+ or - 0.05% over 5,000 FPM/RPMSampling time1X per secondDuty cycle5 to 30 minutesDisplay4-digit LEDLight sourceXenonMountingTripod mountable or handheldHousingPlastic injection case with plastic lensPower source (K4020)110V AC, 6ft.Power source (K4020-230V)230V AC, 6ft.Dimensions4.8 x 4.8 x 8.3"/120 x 120 x 201mm (H x W x D)Weight2.2lbs./1kgH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education an...