Motion, Speed & Force - Page 40

Manufacturer: YIBIAO Brand: LINGZHUANG

Precision digital tachometer wire-speed table intelligent system 61533232187729

Manufacturer: Great Wall Instruments Brand: Great Wall Instruments

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Features 1. Muitiple displays in N/KG/LB, auto unit conversion; 2. RS232 Computer interface / Software for data download and analysis; 3. Setup the upper / lower limit freely. Indicator light / buzzer send out alarm; 4. Showing test direction ( Push or Pull ); 5. Backlight LCD display; 6. High precision & resolution, adjustable sampling speed from 15 up to 480Hz; 7. Holding and removing the peak value automatically (1 to10sec can be setup ); 8. In storage 800sets measuring data, and automatic calculate storage data average, max, min value. In storage data pagination browse and check; 9. AC power / Re-chargeable battery operation capable; 10. Defined period of auto power off without operation; 11. Port-in output ( baud rate 9600 ) can print 10 group storage testing data Max, Min, Average value and eligibility or disqualification judgement; 12. Handy use or fix on the test fixture ( option ) Specifications 1. Capacity: 30N / 3Kg / 6.6lb; 2. Min unit: 0.01N / 0.001kg / 0.001lb; 3. Value error: 0.5%; 4. Units: N, Kgf, LBf; 5. Sampling speed: 15Hz to 480Hz ; 6. Work temperature / Humidity: 0C to 40C, 15 to 80%; 7. Power Supply: 110 to 220V AC battery charger or battery operation (Nickel battery 6V/1500mAh ); 8. Work environment: No vibrancy and corrosion Note If you have any question,please contact us via email or massage We will try our best to serve for you. Please leave us a positive feedback if you are satisfied with our items and service

Manufacturer: Shimpo Brand: Shimpo Model: DT-6-1CG

Our DT-601CG counter is fully programmable, bi-directional and features an automatic multiplier, allowing the unit to count up or down. This model can be used as a "batch" counter/controller to count and display groups of articles such as cartons, cans, bottles etc. The DT-6CG also accepts various modules to perform different functions, such as communicating with a PC or preset "set points" during the counting process. One year warranty. Because of bi-directional and batch counting capability, no need for multiple counters, one does it all. High counting range essential for counting many small parts. Fully scalable, connects ppv to linear units. Provides DC voltage to power various sensors, it eliminates need for separate power supply. High input frequency signal capability covers a variety of high speed counting applications. Accepts a wide range of input voltage, so eliminates the need in stocking dual units and/or changing transformers. Large 6 digit LED display, counting process can be viewed easily from a distant point. Selectable decimal point provides very high resolution, up to 1000th of a digit. Memory backup through a ten year EEPROM saves time during a power failure (important setups are retained in memory). Auto or manual reset provides freedom of choice; no need for operator to stand by. Counter type: bi-directional, batch. Display range: -999999 - +999999. Measuring range: -1999999 - +1999999. Resolution: 0, 0.0, 0.00, 0.000 (selectable). Display: 6 digit, LED, 0.56" high (14.2mm). Input frequency: 10 KHz maximum (square wave), 20 Hz (switching contacts). input signal characteristics: square wave or switching contacts. Input signal amplitude: HI : 4.5 - 30 VDC, LO : 0.4 - 1 VDC, (10 mA, sink). Sensor power supply: 12 VDC (100mA maximum). Voltage requirement: 85 - 264 VAC, 50/60 Hz. Power consumption: 2 W (5 W when optional modules are used). Ambient temperature: 32 - 113 degree F. Measures 3-29/64" Length by 3-49/64" width by 1-7/8" height.

Manufacturer: Mountz Brand: Mountz

Mountz PSE 25 Torque Screwdriver (0.7 - 35 ozf.in)

Manufacturer: Shimpo Brand: Shimpo Model: FG-FAB80B

The Shimpo base mount test stand grip is an accessory for Shimpo force gauge test stands that attaches to a test stand to allow testing on a range of materials.A choice of grip styles is available. The spool base mount grip is for anchoring hard-to-hold items such as thread and filaments. The wedge base mount grip has jaws that close on the specimen and tighten as tension is applied, for testing wires, strip material, plastic tape, or film. The Jacobs chuck base mount grip is for testing low-gauge wire and rigid rods. The flat chuck base mount grip has serrated faces for tensile testing. The tape base mount grip has self-tightening action for testing rubber, tape, and paper. The tensile base mount grip has manually tightened, serrated jaws for gripping large loads. The clevis base mount grip with concave shape centers odd-shaped samples under load, including punched samples or tension springs. The cord and twine base mount grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. The fabric base mount grip has eccentrically mounted, serrated roller grip for self- tightening of specimens.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with t...

Manufacturer: ARCO Brand: SMART SENSOR Model: AR63B

FEATURES Vibration meter(also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration. It is widely used in the lines of Power,petrochemical, machinery manufacturing, metallurgy, vehicles, etc. SPECIFICATIONS Measuring Principle: Piezoelectric Ceramic Accelerometer(shear-type) Acceleration Range :0.1~199.9m/s2 Velocity Range: 0.1~199.9m/s  Displacement Range: 0.001~1.999mm Acceleration Frequency Range: 10Hz~1KHz (LO);1KHz~15KHz (HI) Velocity Frequency Range : 10Hz~1KHz Displacement Frequency Range: 10Hz~1KHz Accuracy : ±5%H ±2 digits Signal Output AC output: 2V peak ( Display full scale ) Max Hold Function: YES Temperature Measurement :YES ?/?Selection: YES   PACKING INFORMATION Power :9V  Battery  Product Net Weight : 137g  Product Size: 150*70*30mm  Packing Style: Aluminum Box Standard Quantity Per Carton: 12PCS Standard Carton Size: 45*32.5*52cm  Standard Carton Gross Weight: 14.14kg PACKAGE INCLUDED GaugeManualhand boxPaper boxBatteryWarranty card

Manufacturer: YIBIAO Brand: LINGZHUANG

Laser tachometer infrared electronic precision motor534231833548

Manufacturer: Dillon Brand: Dillon Model: 36321-0055

The GL force includes features such as rechargeable battery, serial output, backlight, die-cast enclosure, carry case and more. The optional CT test stand is an ideal complement to the GL force gauge to improve testing results. Specifications: accuracy: +/-0.4 percent of capacity tension/compression testing: both. Overload protection: 120 percent minimum. Enclosure: die cast metal. Power: rechargeable battery or AC charger. Display type: 7 segment LCD, 4.5 digit with backlight. Data output: RS-232. Operating temperature: 60 degree - 95 degree F (15 degree - 35 degree C). Includes: hook, plate, cone point, chisel, inverted chisel, extension rod, carry case, batteries, charger, user's manual, calibration card. Battery charger: 10 hour operation from full charge. Warranty: one year parts and labor. Measures tension and compression forces. Rechargeable battery for portability. Backlit display for all light levels. Serial output to transmit data. Includes full set of handy accessories. Size: 55lbs capacity.

Manufacturer: SMART SENSOR Brand: Smart Sensor

The item is suitable for monitoring all kinds of vibrating mechanical facility, especially the vibration measurements of rotating and reciprocating machine. The unit can measure acceleration, velocity, displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation field etc. Specifications: Vibration Pickup:Piezoelectric Ceramic Accelerometer(shear-type) Measuring Range: Acceleration:0.1~199.9m/s ² peak Velocity:0.1~199.9mm/s rms Displacement:0.001~1.999mm Acceleration Frequency Range:10HZ~1KHZ(LO);1KHZ~15KHZ(HI) Velocity Frequency Range:10HZ~1KHZ Displacement Frequency Range:10HZ~1KHZ Accuracy:±5%H±2digits --Frequency Feature Selection/Measuring Mode Selection --Auto Power Off/ Battery Indication/ Backlight Display --Max Hold Function/Temperature Measuring/℉ / ℃ Selection

Manufacturer: Imada Brand: Imada

The FB-30 Mechanical Force Gauge, Capacity: 30 lbf is ideal for push / pull measurements in all environments. Its rugged construction and excellent accuracy make these force gauges ideal for tension and compression quality control measurements. Many ranges are offered, calibrated in Pounds, Kilograms, or Newtons.