Motion, Speed & Force - Page 43

Manufacturer: Checkline Brand: Checkline

The MR03-100 Tension and Compression Force Sensor, inline, Cap 100 lbf / 50 Kgf / 500 N is a force measurement sensor for tensile and compressive loads in a wide variety of applications, available in capacities from 0.25 lb to 100 lb. Thread on two sides can accept a variety of hooks and implements, making this sensor particularly well suited for inline tests.

Manufacturer: COLE-PARMER Brand: Shimpo Model: FG-7003

Versatile gauge provides fast sampling results and great accuracy with a 1000 Hz sampling rate and ±0.2% accuracy full-scale. Internal memory of 1000 data points can be separated into groups allowing multiple tests to be recorded without interruption. Free data logging and graphing software can be used to transfer results to a PC for storage or further analysis, and set the gauge sampling rate from 0 to 60 readings per second. Additional features include high/low set points with audible and visual alarms, and a comparator output for production line integration. Gauge has three operation modes: track, peak, and auto peak. Track mode is for real-time readings. Peak mode is for displaying the peak reading, which will display until a higher reading is measured. Auto peak mode is similar to peak mode, but the display will reset after a programmed time period. Gauge body is ergonomically designed for handheld use, and made of aluminum for rugged use in a test stand. Display auto-rotates 180° to be easily seen from either position. Large, backlit display auto-rotates 180° to be easily read from either position. Plus the compression/tension icons and dual-labeled keypad allow for instant switching from push to pull testing for portable or test stand operation. What's Included: six tip attachments (hook, flat, conical, chisel, notched, and tip extension shaft), USB cable, padded carrying case, rechargeable 3.6V NiMH batteries, AC adapter/charger, and calibration document provided by the manufacturer. Free software available via download. Use as a portable gauge or mount on a test stand-the display automatically rotates 180° for easy reading in either position Measure tension and compression in three modes: track, peak, or auto-peak Integrate gauge into a quality system using the comparator output for repetitive pass/fail results Simple data logging at the push of a button or set for continuous data storage Log data to a computer, or optional printer, with the

Manufacturer: Shimpo Brand: Shimpo

The FGE-5X FGE Hand-held Digital Force Gauge, Cap. 5 lbf / 2 Kg / 20 N, Complete Kit, 220V is a microprocessor-controlled force gauge that precisely measure push/pull forces up to 100 pounds with an accuracy of 0.2%. They are extremely compact for convenient hand-held use and include provisions for mounting on a test stand for bench top use.

Manufacturer: Shimpo Brand: Shimpo Model: FGV-0.5XY

The Shimpo FGV-XY DART 2.0 series digital force gauge with liquid crystal display (LCD) and USB, RS-232, and analog outputs measures compression (push) and tensile (pull) forces in quality control, consumer testing, research and development, and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. USB, RS-232, and analog outputs on the gauge provide connection to a computer or other compatible device, such as a motorized stand. A USB cable is included with the gauge. The meter can record and store measurements, and it provides statistics for recorded readings, including the highest or lowest positive or negative recorded values, the standard deviation of recorded values, the average of recorded values, and the last measurement value displayed. The gauge's comparator has user-preset high and low limits for pass/fail testing (also known as go/no-go testing). The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability, and the meter's response time can be set at 3, 20, or 150 milliseconds. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The g...

Manufacturer: Ametek Brand: Chatillon Model: AMEDFX2010 Color: Black

The Chatillon DFX Series is an economical digital force gauge ideal for applications where users are interested in basic peak force measurement. The DFX features an integral load cell with a measurement accuracy of better than 0.3 percent full scale. The DFX Series operates using a rechargeable NiMH battery Pack and can operate using the supplied universal charger as well. Under battery operation, the DFX Series will operate for 70 to 100 hours of continuous use and also has an automatic power shut-off extending the recharge intervals. A large, easy-to-read, high resolution DOT matrix LCD display supports a variety of standard gauge functions including normal and peak readings. Loads are displayed in ozf, gf, lbf, kgf, and N units. The display languages may be setup to indicate in English, Spanish, French, German, Portuguese, and Chinese. The DFX Series’ calibration procedure is included in the gauge setup. The DFX Series force gauges come with a carrying case, universal battery charger, flat and hook adapters. The DFX Series is supplied with a Certificate of Conformance.

Manufacturer: VETUS INSTRUMENTS Brand: VETUS INSTRUMENTS Color: White

Function Characteristics: 1. High precision, high resolution. 2. Five kinds of test modes, three kinds display modes---To improve test efficiency to the greatest extent. 3. N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion. 4. Gravity acceleration setting function---Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate. 5. Peak holding function---Maintain peak display until manual reset. 6. Automatic peak function---Maintain peak value can be removed automatically after 2 seconds. 7. Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm. 8. Data stored function, we can store 896 test values. 9. 10 minutes without operating automatic shutdown, green initiative. 10. High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function. 11. 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using. 12. Six digit Big screen display. Parameter: Item No. Rope Diameter (mm) HD-1T Φ 6~Φ 14 HD-2T Φ 10~Φ 18 HD-5T Φ 16~Φ 26 HD-10T Φ 24~Φ 36 HD-20T Φ 24~Φ 36

Manufacturer: Shimpo Brand: Shimpo Model: FGV-50XY

The Shimpo FGV-XY DART 2.0 series digital force gauge with liquid crystal display (LCD) and USB, RS-232, and analog outputs measures compression (push) and tensile (pull) forces in quality control, consumer testing, research and development, and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. USB, RS-232, and analog outputs on the gauge provide connection to a computer or other compatible device, such as a motorized stand. A USB cable is included with the gauge. The meter can record and store measurements, and it provides statistics for recorded readings, including the highest or lowest positive or negative recorded values, the standard deviation of recorded values, the average of recorded values, and the last measurement value displayed. The gauge's comparator has user-preset high and low limits for pass/fail testing (also known as go/no-go testing). The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability, and the meter's response time can be set at 3, 20, or 150 milliseconds. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The g...

Manufacturer: Shimpo Brand: Shimpo Model: FGV-100XY

The Shimpo FGV-XY DART 2.0 series digital force gauge with liquid crystal display (LCD) and USB, RS-232, and analog outputs measures compression (push) and tensile (pull) forces in quality control, consumer testing, research and development, and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. USB, RS-232, and analog outputs on the gauge provide connection to a computer or other compatible device, such as a motorized stand. A USB cable is included with the gauge. The meter can record and store measurements, and it provides statistics for recorded readings, including the highest or lowest positive or negative recorded values, the standard deviation of recorded values, the average of recorded values, and the last measurement value displayed. The gauge's comparator has user-preset high and low limits for pass/fail testing (also known as go/no-go testing). The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability, and the meter's response time can be set at 3, 20, or 150 milliseconds. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The g...

Manufacturer: Mark-10 Brand: Mark-10 Model: MR02-200

Series R02 button type smart sensors are designed for compression measurement applications in virtually every industry. Compact and rugged, Series R02 sensors are ideal for heavy duty applications with space constraints. Capacities available from 100 to 10,000 lbF [500 N to 50 kN]. Compatible with Mark-10 model 5i and 3i indicators (sold separately) through unique Plug & Test technology.

Manufacturer: Shimpo Brand: Shimpo Model: FGV-10XY

The Shimpo FGV-XY DART 2.0 series digital force gauge with liquid crystal display (LCD) and USB, RS-232, and analog outputs measures compression (push) and tensile (pull) forces in quality control, consumer testing, research and development, and process control applications. The LCD shows either present force measured in real time or the maximum positive or negative peak force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has a 1,000-hertz (Hz) sampling rate and updates measurements 1,000 times per second. USB, RS-232, and analog outputs on the gauge provide connection to a computer or other compatible device, such as a motorized stand. A USB cable is included with the gauge. The meter can record and store measurements, and it provides statistics for recorded readings, including the highest or lowest positive or negative recorded values, the standard deviation of recorded values, the average of recorded values, and the last measurement value displayed. The gauge's comparator has user-preset high and low limits for pass/fail testing (also known as go/no-go testing). The gauge can withstand an overload of up to 200 percent of full-scale capacity. The reversible LCD and keypad provide readability when the gauge is held upside down. The user can adjust the speed at which the display refreshes, for readability, and the meter's response time can be set at 3, 20, or 150 milliseconds. A tracking function adjusts measurements to account for changes in ambient temperature and humidity, which can impact measurement accuracy. The zero function clears a reading on the display and zeroes the meter before measurement for improved accuracy. The display can be set to show compressive force as positive and tensile force as negative, or the other way around. The gauge can be held in one hand during use, or it can be mounted on a compatible stand (not included) for hands-free operation. A removable hanger allows the gauge to be suspended from a hook or fixture. The g...