Motion, Speed & Force - Page 51

Manufacturer: VETUS INSTRUMENTS Brand: BENETECH

The item is suitable for monitoring all kinds of vibrating mechanical facility, especially the vibration measurements of rotating and reciprocating machine. The unit can measure acceleration, velocity, displacement and ambient temperature, which is widely used in mechanical manufacture, electric power metallurgy and general aviation field etc. Technical Specifications * Measuring range: Acceleration: 0.1~199.9m/s Speed: 0.1~1999.9m/s Displacement: 0.001~1.999 mm (PP) *Accuracy: ±5% * Different vibration frequency characteristics: - acceleration: 10Hz~1KHz (LO); 1KHz~15KHz (HI) - speed: 10Hz~1KHz (LO) - displacement: 10Hz~1KHz (LO) *LCD display: 3 1/2 digits display * Vibration acquisition: piezoelectric accelerometer (shear type) * Operation temperature: 0~40 Degrees * Equipped with a long, short probe each, suitable for a variety of different places to measure * Equipped with a magnetic chuck, easy to test when the hand is not convenient * Maximum lock *Ambient temperature display * Celsius / Fahrenheit unit conversion *Low power indication function *Automatic shutdown function *LCD backlight function *Power supply: 1*9V/6F22 battery（Battery not included in the package）

Manufacturer: YIBIAO Brand: LINGZHUANG

453 factory direct marine analog tachometer 0600 revolution 800 rpm 1200 2000525115267391

Manufacturer: OMRON Brand: Omron

Ratings [Item]6-digit total counter [Front Cover]Light gray [Rated supply voltage]100 to 240 VAC(50/60 Hz) [External power supply]50 mA at 12 VDC [Operating voltage range]85% to 110% of rated supply voltage [Power consumption]100 to 240 VAC: 6.5 VA max. 12 to 24 VDC: 0.6 W max. [Dimensions]48 x 24 x 80 mm(W x H x D) [Mounting method]Flush mounting [External connections]Screw terminals [Display]7-segment,negative transmissive LCD(with red backlight) [Digits]6 digits(8.5-mm-high characters) [Input mode]Up(increment) [Input] Input signals Count,reset,and key protection *1 Input method No-voltage input(NPN transistor input)or voltage input(PNP transistorinput)(selected via DIP switch) Count,reset,start No-voltage input(NPN transistor input) Short-circuit(ON)impedance: 1 k Ohm max. Short-circuit(ON)residual voltage:2 VDC max. Open(OFF)impedance: 100 k Ohm min. Voltage input(PNP transistor input) Short-circuit(ON)impedance: 1 k Ohm max. ON voltage: 9 to 24 VDC OFF voltage: 5 VDC max. Open(OFF)impedance: 100 k Ohm max. Key protection No-voltage input(NPN transistor input) Short-circuit(ON)impedance: 1 k Ohm max. Short-circuit(ON)residual voltage:0.5 VDC max. Open(OFF)impedance: 100 k Ohm min. [Weight]Approx. 75 g *1. Only a non-voltage input(NPN transistor)is possible for the key protectioninput. The key protection input will be a non-voltage input even if the NPN/PNPinput mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will still be functional.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840009

Used in motion studies in classrooms, physics and Q.C. labs. Convenient for non-contact measurement of running machinery in factories and elsewhere since, unlike tachometers, stroboscopes require no special reflective tapes. Powerful xenon lamp. The ½” high 4 digit LED is easy to read in both light and dark environments. Microprocessor circuit with a crystal time base insures high accuracy over a wide range and does not require recalibration. Built in tripod screw. Works on 110V, 220V, 240V. Dimensions: 9” x 5” x 5” (235 x 125 x 125 mm) Weight: 32 oz (900 g).

Manufacturer: Tereninstruments Brand: tereninstruments

We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days. Applications: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. Features: Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes. General Specifications: Sensor: Piezoelectric Accelerometer Measuring Range: Velocity: 0.01~200 mm/s True RMS Frequency Range: Velocity: 10 Hz ~ 1k Hz Accuracy: less than 5 % Analogue Output: AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) Max. Value Hold Power Off: Manual Power Off or Auto Power Off Battery Indicator: Low Battery Indicator Data Output: USB, RS-232, Bluetooth Operating Conditions: Temperature: 0~50 degree; Humidity: less than90 %RH Power Supply: 4 x 1.5V AA size (UM-3) Battery Dimensions: 160 x 68 x 32 mm Weight: 181 g (Not Including Batteries) Package includes: 1*VM-6310 Vibration Meter

Manufacturer: Extech Brand: Extech Model: 461893

All tachometers are microprocessor based with limited memory capabilities. Memory stores the final reading, as well as the last minimum and maximum-recall readings at the touch of a button. Both the contact and optical tachometers feature a large, five-digit LCD. Contact Tachometer Use this digital contact model with either a concave or convex tip to measure the speed of rotating objects (rpm measurements). Use unit with the linear speed wheel to measure surface speeds (ft/min or m/min measurements). Tachometer automatically suppresses insignificant zeros to provide precise rpm readings. Optical Tachometer Use the digital optical model to take noncontact speed measurements of rotating objects (rpm measurements). Tachometer uses a reflective mark and an integral light beam to provide precise readings. Display updates once every second. Autoranging function switches between two ranges: 5 to 999.9 rpm or 1000 to 99,999 rpm for greater accuracy. What's Included: four AA batteries and a carrying case. Model 87700-00 includes one convex tip, one flat tip, and one surface wheel. Model 87700-01 includes a 23" (58.4 cm) roll of reflective tape. Simple operation and low cost make these tachometers ideal for general use

Manufacturer: YIBIAO Brand: LINGZHUANG

h21 table car dashboard car dashboard LCD modified in Cheng Zongcheng car LCD instrument panel (25982248360) (104881182)

Manufacturer: Shimpo Brand: Shimpo Model: DT-107A

The Shimpo DT-107A portable contact tachometer has a six-inch wheel, measures rotational speed, linear speed, surface speed, and total length, and provides 16 different measurement units for rate and speed. This portable contact tachometer has a six-inch wheel and is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed, linear speed, surface speed, and total length for flexibility of use, and measures the rate of speed and length in 16 different units for versatility. The five-digit LED screen presents test results and the unit of measurement. Flashing numerals on the LED screen indicate speeds outside of the measuring range to help avoid damage to the instrument. It stores up to 13 readings, including the maximum, minimum, and last test result values for ease of data recall. A die-cast aluminum body provides durability in harsh environments, and the device can be tripod-mounted and locked to take continuous measurements. The tachometer conforms to NIST standards for compliance with regulations, and the CE mark indicates compliance with applicable EU directives. It comes with a six-inch wheel, two cone adapters, a funnel adapter, a 3.5-inch extension shaft, a carrying case, and an NIST certificate. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments.SpecificationsRange0.1 to 25,000rpmAccuracy+/-0.06rpm: 0.10 to 999.9rpm; +/-0.6rpm: 1,000.0 to 9,999.9rpm; +/-0.006% of reading +/-1 digit (+/-2 rpm max.): 9,999.9 to 25,000rpmMeasuring unitsRPH, RPM, ft./hour, ft./min., MPH, yards/hour, yards/min., in./min., meters/hour, meters/minute; Length: meters, centimeters, inches, feet, and yards; total revolutionsUpdate time1 secondOperating temperature32 to 113 degrees F (0 to 45 degrees C)Power(2) AA batteriesDimensions7.2 x 2.4 x 1.8 inches/182.5 x 60 x 46mm (H x W x D)Weight0.9 lb./400gH is height, the vertical distance from the lowest to highest point; W is width, th...

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These digital, portable tachometers provide a nonslip, rubber grip for single-hand operation. Tachometers feature user-selectable fixed or auto-ranging resolution, memory of last reading, minimum and maximum, tripod mounting bushing for hands-free operation, target "lock on" indicator, and a low-battery indicator. Model 08199-20 features a red LED that measures optical rpm from up to 30" (76.2 cm) away. Models 08199-22 and -24 feature a Class II laser that measures rpm from up to 25 feet (7.6 m) away. These tachometers function as a totalizer/counter and a timer (stopwatch) programmable in both English and metric units. Model 08199-24 adds the functionality of measuring contact rpm and surface speed. What's Included: Model 08199-20 includes 12" (30.5 cm) reflective tape. Model 08199-22 includes 12" (30.5 cm)reflective tape and NIST-traceable calibration report supplied by the manufacturer. Model 08199-24 includes remote contact assembly with concave and convex tips, 10-cm speed wheel, 5 ft (1.5 m) of reflective tape, NIST-traceable calibration report supplied by the manufacturer, and a carrying case. Ergonomic design allows simultaneous viewing of both the target and display Rugged, rubberized design for industrial applications

Manufacturer: SMART SENSOR Brand: Smart Sensor

The item is suitable for monitoring all kinds of vibrating mechanical facility, especially the vibration measurements of rotating and reciprocating machine. The unit can measure acceleration, velocity, displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation field etc. Specifications: Vibration Pickup:Piezoelectric Ceramic Accelerometer(shear-type) Measuring Range: Acceleration:0.1~199.9m/s ² peak Velocity:0.1~199.9mm/s rms Displacement:0.001~1.999mm Acceleration Frequency Range:10HZ~1KHZ(LO);1KHZ~15KHZ(HI) Velocity Frequency Range:10HZ~1KHZ Displacement Frequency Range:10HZ~1KHZ Accuracy:±5%H±2digits --Frequency Feature Selection/Measuring Mode Selection --Auto Power Off/ Battery Indication/ Backlight Display