Motion, Speed & Force - Page 86

Manufacturer: NIDEC SHIMPO Brand: NIDEC SHIMPO

NIDEC SHIMPO FGV-50XY DIGITAL FORCE GAUGE

Manufacturer: Mark-10 Brand: Mark-10

The STW-500 Torque Wrench, Capacity 500 lb-in 5000 kg-mm 5000 N-cm (Requires BGI Force Gauge) is ideal for testing application and removal torque on bolts and other fasteners, with numerous uses in the automotive, aerospace, and other industries. .Series STW torque sensors work in conjunction with the BGI force/torque indicator for instantaneous, average, and peak torque measurements. Simply plug the 15-pin connector into the external sensor connector on the indicator.

Manufacturer: AWS Brand: AWS

The Joint Simulator / Rundown Fixture or Adapters, 3/4" Drive, 750 Ft-Lb is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.

Manufacturer: Imada Brand: Imada

USB, RS232 and analog outputs, 1000 data memory, programmable high / low setpoints, reads in lbs, kg, N, real time and peak mode selectable, overload alarm and low battery indicator, full set of accessories, reversible display, 0.2% 1 LSD accuracy

Manufacturer: Mark-10 Brand: Mark-10

The M4-500 Advanced Digital Force Gauge with Output, Cap. 500 lbf / 250 Kg / 2500 N, 220V is designed for tension and compression force testing in numerous applications across virtually every industry. The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is 0.2% of full scale 1 digit, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software. Series 4 gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data from Series 5 and 4 gauges. Data saved in the gauges memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 5

Series 5 Advanced Digital Force Gauge with #10-32M UNF Load Cell Thread, 10 lbF / 160 ozF / 5 kgF / 5000 gF / 50 N Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 2,000 lbF (0.5 N to 10 kN). The gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is 0.1% of full scale, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges' many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. Includes: Carrying case chisel cone V-groove hook flat extension rod universal voltage AC adapter battery quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5's averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates cont

Manufacturer: Scientific Industries Brand: Torbal Model: 16264 Color: White

High Capacity Force Gauge with 50kN (~5t) capacity x 10N (1kg) resolution. This unit has an external load cell for rugged force testing. Used for both compression and tension, it comes equipped with two ball bearings to prevent damage to the mechanism. A carrying case, 6,400 sample memory slots, and long-lasting batteries make this model ideal for field testing. The gauge uses a number of professional features including Peak Mode, Statistical Graphing, and Auto-rotate display.

Manufacturer: AWS Brand: AWS

The AWS TT-QC-1000i-3/8 Digital Torque Tester, Range 100 - 1000 Lb-in, Drive Size 3/8 in is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: Mark-10 Brand: Mark-10 Model: Series TT03

Series TT03 Digital Torque Gauge, 50 lbFin / 570 Ncm TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities 50 lbFin (570 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges' rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements. Includes: Carrying case universal voltage AC adapter battery chuck key quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration Series TT03 features a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges' features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The gauges include MESUR Lite data acquisition software, for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation. Features: Ergonomic torque sensor with Jacobs chuck Peak torque values saved and displayed High-speed 2,000 Hz sampling rate USB data output of continuous or individual data points Programmable set points with pass/fail indicators Live load bar graphs with set point markers Peak memory for clockwise and counter clockwise readings Set points always displayed Configurable audio alarms and key tones MESUR Lite data collection software included Battery or AC operation Safe overload: 150% of capacity CE mark

Manufacturer: Mark-10 Brand: Mark-10

The Mark-10 TORQ-T-12 Digital Torque Tester for Hand Tools, Capacity 12 lb-in, 110V is a simple yet accurate solution for testing torque screwdrivers, wrenches, and non-motorized torque tools. Applications exist in manufacturing facilities in virtually every industry. It features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The TORQ-T captures peak torque in both clockwise and counterclockwise directions.