Motion, Speed & Force - Page 92

Manufacturer: Baseline Brand: Baseline

Dynamometer upgrade/trade-in program, misc. for Baseline 200lb. large head

Manufacturer: COLE-PARMER Brand: Extech

Applications: Contact RPM - flywheels - conveyors - pumps - elevators Noncontact RPM - motors - fans - gears What's Included: Contact wheel for rpm or linear surface speed/length, reflective tape, soft case, and 9 V battery. Quickly and safely measure rpm, surface speed, and length with one tool Microprocessor based with quartz crystal oscillator, ensuring high accuracy Store and recall up to ten data sets in memory with up to four parameters (measurement, max, min, and average) Wide rpm range (photo and contact) and linear surface speed/length (contact) measurements Laser guided for greater distance of noncontact measurements up to 1.6 ft (500 mm) Large 5-digit backlit LCD Rugged double-molded housing with ergonomic grip

Manufacturer: Shimpo Brand: Shimpo Model: MFD-03

So simple anyone can use, the economical MFD mechanical force gauges with dual kg/lb scales are excellent for push/pull force testing in manufacturing, material testing, maintenance and inspection applications. The peak force operation mode features an easy push-button reset, especially helpful for repetitive testing in an assembly line or in quality control. The large dial indicator allows viewing of force changes as they occur. This large dial reduces the chance for parallax errors when taking readings. The MFD was ergonomically designed for handheld use, but may also be used with the optional handle-great for loads over 15 pounds (6.8 kg). Due to its mechanical design, response time is immediate. Calibration is achieved by a set of precisely matched springs which are overload protected. All standard Series MFD gauges include a protective carrying case, calibration certificate, plus attachment adapters.

Manufacturer: Extech Instruments Brand: Extech Model: 461891

Contact Tachometer Surface wheels measure contact surface speeds (10 to 9,999 rpm) of rotating objects. The memory button holds last reading and recalls min/max readings display. Complete with wheels for linear surface speed (0.2 to 6560 feet/minute; 0.05 to 1999.9 meters/minute) or RPM measurements. What's in the Box Comes with cone tip, flat tip and spare wheel for surface speed measurements, four AA batteries, carrying case, and user manual. Applications Motor speed, moving fans, pumps, and gears, propeller devices, and many other general maintenance, production, and automotive uses. What is a Tachometer? A tachometer is a device that measures the angular speed of a rotating shaft in terms of revolutions per minute (RPM). Also, a tachometer can measure linear speed in terms of feet per minute (feet/minute) or meters per minute. How do Contact Tachometers Operate? The sensor tip is placed in direct contact with the rotating object. After 2 seconds an accurate reading is displayed. Linear surface speed can also be measured by placing the edge of the wheel on the moving object. How do Photo (Non-contact) Tachometers Operate? First, a small piece of reflective tape (approximately 1/4-inch) is mounted on the object to be measured. Second, the light beam or laser is pointed at the revolving tape. The reflection from the tape provides a reading to be displayed and updated once per second. For the most accurate measurements, the distance between the tachometer and the reflective tape should be within 6 inches for a light beam and up to 6.5 feet for a laser. Fluorescent or bright ambient lights may interfere with the measurement. Which Extech Tachometer Model Is the One for You? A non-contact (photo) tachometer was designed for applications where it is not feasible to have the tachometer come in contact with the rotating device. This is the case in high-speed applications and/or where the object to be measured is not easily reached. A contact tachometer is also available for application...

Manufacturer: Shimpo Brand: Shimpo Model: LS-S50MLR-DT311

LS-S50ML is a laser sensor that can be taught to recognize difference in colors. It is a class 1 red laser with switching frequency of 1.5KHZ. Contained in a metal housing with 6ft of cable, which can be utilized for different operations including stroboscopes, counters and panel tachometers. It includes a trimmer potentiometer that is located on the side for minimum and optimum sensitivity adjustments. Can be used in normally closed or normally open operation, NPN type of output, with a yellow LED for signal indication and a green LED for power.

Manufacturer: Mark-10 Brand: Mark-10 Model: G1062

For general low force pull testing applications. The serrated, self tightening steel jaws are easily opened with a spring-loaded lever

Manufacturer: Mark-10 Brand: Mark-10

Rundown fixture for Torque Tool Testers, Simulate a Hard Joint with Faster Torque Buildup

Manufacturer: FLUKE Brand: Fluke Model: 113

FLUKE MULTIMETER, UTILITY

Manufacturer: COLE-PARMER Brand: DeFelsko

Measures adhesion of coatings to metal, wood, concrete and other substrates - revolutionary self-alignment feature and pull rate indicator Easy-to-use Portable, hand-operated instrument requires no external powersource -ideal for lab and field use Large, easy-to-read LCD Pull Rate Indicator - allows operator to easily monitor and adjust therate of pull in accordance with international test methods Easily select dolly sizes, change measurement units or store readings with the touch of a button Durable Weatherproof, dustproof and shockproof Quality hydraulic pump can be used in any position Accurate Every PosiTest Adhesion Tester is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms with ASTM D4541, ISO 4624 and others Versatile Internal Memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls Optional software available for downloading to a computer 10, 14, 20 or 50 mm dollies maximize capability and accuracy across a wide range of bond strengths LCD displays pressure value in psi or Mpa Options 50 mm Accessory Kit - ideal for lower bond strength finishes such as coatings on wood, concrete and plastic. Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) Optional software available to download stored results to a PC for printing, charting or exporting to a document or spreadsheet

Manufacturer: Tool connection Brand: Tool connection

Gauge ranges from 5 to 360 degrees with +/-1% accuracy.