|
|
-
4.3 of 5.0 with 31 Reviews
SALE PRICE: $685.00
Manufacturer: Cedar
Brand: Cedar
Manufacturer: Cedar
Brand: Cedar
|
The DID-4A Cedar Digital Torque Screwdriver with Memory & USB Data Output , 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a torque measuring manual screw driver designed for lab and production use. The DID-4A is a new, improved version of the DID-4. The DID-4A increases the reliability of tool by removing the internal clutch from the unit. An optional ratchet, part number: RA2, is sold separately The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SV-USB software. The DID-4A Cedar Digital Torque Screwdriver with Memory & USB Data Output , 35 lb-in Capacity, 0.20~35.00 lbf-in Measuring Range is a Torque Screwdriver that has an accuracy of +/- 0.5% F.S., +/-1 LSD and has programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Use the 800 internal memory for data recall or USB download for SPC.The DID substantially reduces scrap and rework costs by eliminating over and undertightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies. All new units include a 3 point certificate of calibration traceable to NIST. ISO-17025 certificates are available and listed under a separate part number.
-
4.3 of 5.0 with 31 Reviews
SALE PRICE: $691.00
Manufacturer: Ametek
Brand: Chatillon
Model: AMEDFX2200
Color: Black
Manufacturer: Ametek
Brand: Chatillon
Model: AMEDFX2200
Color: Black
|
The Chatillon DFX Series is an economical digital force gauge ideal for applications where users are interested in basic peak force measurement. The DFX features an integral load cell with a measurement accuracy of better than 0.3 percent full scale. The DFX Series operates using a rechargeable NiMH battery Pack and can operate using the supplied universal charger as well. Under battery operation, the DFX Series will operate for 70 to 100 hours of continuous use and also has an automatic power shut-off extending the recharge intervals. A large, easy-to-read, high resolution DOT matrix LCD display supports a variety of standard gauge functions including normal and peak readings. Loads are displayed in ozf, gf, lbf, kgf, and N units. The display languages may be setup to indicate in English, Spanish, French, German, Portuguese, and Chinese. The DFX Series’ calibration procedure is included in the gauge setup. The DFX Series force gauges come with a carrying case, universal battery charger, flat and hook adapters. The DFX Series is supplied with a Certificate of Conformance.
-
4.3 of 5.0 with 6 Reviews
SALE PRICE: $735.87 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: 475044-SD-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: 475044-SD-NIST
High Capacity Force Gauge/Data logger that provides Push/Pull measurements in lb., kg and Newton units with SD card data logging. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
4.3 of 5.0 with 49 Reviews
SALE PRICE: $745.00
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
The MR02-500 Rugged S-beam Compression Force Sensor, Cap. 500lbf / 250 Kgf / 2500 N is a button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints.
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $760.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Mark-10
Manufacturer: COLE-PARMER
Brand: Mark-10
|
These digital force gauges are designed for tension and compression force testing applications. The gauges feature a sampling rate of 2000 Hz, producing accurate results under a wide range of test conditions. The easy-to-use menu driven interface and backlit LCD with large characters makes accessing the gauges' features and configurable parameters simple. Gauges include MESURTMLite and MESURgauge demo data acquisition software and a USB port for conveniently downloading data to a PC for further analysis and report tabulation. Units feature set point indicators for pass/fail testing and are housed in an ergonomic, reversible aluminum housing that allows for hand held or test stand mounting applications. What's Included: MESUR Lite and MESURgauge demo software, USB cable with driver, hook, flat, v-groove, chisel, cone, extension rod, cushioned carrying case, one 8.4 V rechargeable battery, AC adapter, and a calibration document supplied by the manufacturer. Compact, economical gauges for handheld or test stand applications High speed 2,000 Hz peak sampling rate USB data output Backlit graphic display with large digits Live load bar graph with audio/visual overload alarms Programmable go/no go limits, with audio/visual alarms Peak readings always shown on display Ergonomic, reversible housing for hand held or test stand use
-
4.3 of 5.0 with 24 Reviews
SALE PRICE: $760.00
Manufacturer: COLE-PARMER
Brand: Mark-10
Manufacturer: COLE-PARMER
Brand: Mark-10
Customize your wire crimp pull tester for your application
-
4.3 of 5.0 with 11 Reviews
SALE PRICE: $770.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R03
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R03
Series R03 Plug TestTM technology. Includes: NIST-traceable certificate of calibration with data Features: Member of the Plug Test family of interchangeable sensors and indicators Rugged aluminum housing Measures tensile and compressive forces Accuracy: 0.15% of full scale + indicator Weight: 0.4 lb (0.2 kg) Warranty: 3 years Unique Plug TestTM technology allows for interchangeable sensors to be used with a Mark-10 indicator. All calibration and configuration data is saved in the smart connector. The Plug TestTM connector locks into the receptacle in the indicator when fully inserted. Dual buttons on the indicator housing release the connector for easy removal. Gold plated spring contacts ensure long lasting and reliable connection. The load cell shaft includes flat surfaces as well as a threaded hole to accommodate attachments. Series R03 sensor with shortened cable is shown mounted to an ESM1500LC test stand.
-
4.3 of 5.0 with 7 Reviews
SALE PRICE: $785.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Shimpo
Model: FGV-100xy
Manufacturer: COLE-PARMER
Brand: Shimpo
Model: FGV-100xy
This series of force gauges is a versatile family of instruments perfect for quality inspections, finished goods testing, R&D, and other force related applications. They offer nine models covering ranges from a few ounces up to 200 lbs. Use as a handheld gauge or mount to a test stand repeatable test results. All models feature three types of outputs: USB interface, RS-232C interface, and analog output. Onboard statistics calculations provide fast access to maximum, minimum, average, and standard deviation data. Additional features include 1000 point continuous memory, hi/low setpoints, and an open collector output for overload or comparator indication. For accuracy, economy, versatility, ease of operation, and ability to communicate with the outside world, choose a model from this fine What's Included: AC adapter/charger, carrying case, hook, chisel, flat leaf, notched head, hanger, cone head, extension rod, and USB cable.
-
4.3 of 5.0 with 21 Reviews
SALE PRICE: $790.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R51
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R51
|
Series R51 Plug TestTM technology. Designed for clockwise and counter-clockwise torque testing. The sensor may be handheld or mounted to a test stand, fixture, or other equipment. Bits or fixtures may be placed in the chuck, although extra care should be taken when handling low capacity models. Includes: NIST-traceable certificate of calibration with data included Features: Member of the Plug Test family of interchangeable sensors and indicators Outstanding overload protection Interchangeable chucks (order separately) Accuracy: 0.20% of full scale + indicator Weight: From 1.4 lb (0.6 kg) Warranty: 3 years Unique Plug TestTM technology allows for interchangeable sensors to be used with a Mark-10 indicator. All calibration and configuration data is saved in the smart connector. The Plug TestTM connector locks into the receptacle in the indicator when fully inserted. Dual buttons on the indicator housing release the connector for easy removal. Gold plated spring contacts ensure long lasting and reliable connection. Series R51 feature unique interchangeability with three chuck attachment sizes as well as a bit holder. The attachment is mated to the main sensor body with a pin, while a threaded ring holds the attachment in place.
-
4.3 of 5.0 with 19 Reviews
SALE PRICE: $800.00
Manufacturer: Mark-10
Brand: Mark-10
Manufacturer: Mark-10
Brand: Mark-10
|
The M3-200 Digital Force Gauge Complete Kit, Cap. 200 lbf / 100 Kg / 1000 N, 220V is designed for measuring tension and compression (push & pull) force testing in numerous applications. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output (non-streaming) is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with a wide range of test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
|
|