Recorders & Data Acquisition - Page 107

Manufacturer: DeltaTrak Brand: DeltaTrak

Applicable for measuring air temperatures. Use the Air/Gas Probe to monitor ovens, stove tops or the freezer.

Manufacturer: Maxim Integrated Brand: Maxim

The iButton® temperature logger (DS1925) is a rugged, self-sufficient system that measures temperature and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 122K 8-bit readings or 61K 16-bit readings taken at equidistant intervals ranging from 5min to 273hrs can be stored. In addition, there are 512 bytes of nonvolatile memory for storing application-specific information. A mission to collect data can be programmed to begin immediately, after a user-defined delay, or after a temperature alarm. Access to the memory and control functions can be password protected. The DS1925 is configured and communicates with a host computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1925 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1925 to be mounted on almost any object, including containers, pallets, and bags. Visit ibutton.com for more information and FAQs on iButton products made by Maxim Integrated.

Manufacturer: Onset Computer Corporation Brand: Onset

The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-006 Room Occupancy/Light Logger is available in a standard 128 KB memory model (UX90-006) capable of 84,650 measurements and an expanded 512KB memory version (UX90-006M) capable of over 346,795 measurements.

Manufacturer: Graphtec Brand: Graphtec Model: GL100-N

Graphtec GL100-N GL100 Main Unit, Standard Model, Required to Use with Sensor Units or Input Adapters. It is modular type that is able to support variety measurement by exchanging the input module. Multiple sensors and the input terminal are available for corresponding to the application. Easy measurement by multifunction input Available the software for PC & Smart devices Possible to check the data in multiple method Reliable measurement with useful functions Typical applications Sales network Flexible input module allows wide range of measurements The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.   Main body Input modules GL100-WL (with WLAN) GL100-N (without WLAN) Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.   Easy measurement by multifunction input The input module can be expanded to accommodate a wide variety of measurements   Dual port adapter connects up to two modules for simultaneous interface GL100-WL / N Dual port adapter Temp./Humidity sensor Illuminance/UV sensor GL100-WL / N Dual port adapter Temp./Humidity sensor Carbon dioxide sensor GL100-WL / N Dual port adapter Illuminance/UV sensor Carbon dioxide sensor It is not able to connect two sensors of the same type. Providing a variety of sensors and input terminals corresponding to the application. There is the following input module

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI141JH

The HI141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1m cable for direct insertion. HI141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The minimum or maximum temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots. The Windows compatible software supports communication between the logger and the PC through the infrared transmitter. For a typical 1 minute logging interval, the battery will last about 4 years. All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions. Environment: maximum RH 100 percent. Resolution: 0.1 degree C (-40.0 to 100.0 degree C); 0.2 degree C (> 100.0 degree C). Accuracy: +/-0.5 degree C (-40.0 to 0.0 and 70.0 to 100.0 degree C); +/-0.4 degree C (0.0 to 70.0 degree C) +/-1.0 degree C (> 100.0 degree C). Measures 86.5mm diameter by 35mm height. Logging interval from 1 second to 24 hours. Logging delay start up to 199 hours and magnetic start. Programmable high and low alarms. Non-volatile storage of logging. Waterproof casing. BEPS (Battery Error Protection System). Temperature dataloggers with 2 external sensors. LCD display, -40.0 to 125.0 degree C range.

Manufacturer: Dickson Unigage Inc. Brand: Dickson

The Dickson Data Logger calibration software allows for 1-point temperature and/or humidity adjustments to be made directly from your PC.

Manufacturer: Sauermann Brand: Sauermann

The Sauermann KT320 Bluetooth Multi-Function Data Logger utilizes Bluetooth communication, allowing users to connect between the logger and a smartphone or tablet. Data may therefore be accessed without removing the logger from its location.|The KT320 internally measures temperature and has two universal inputs for probes. These inputs allow for compatibility with multiple probes, which are automatically recognized by the KT320. The logger therefore supports the measurement of humidity, current, voltage, and pulse.|Communication between the KT320 and a PC is carried out with a USB cable with a micro-USB female connector.|The KT320 data logger ensures traceability in the food industry environment and also validates that industrial installations are functioning properly.

Manufacturer: Reed Brand: Reed Instruments Model: SD-3007

This SD series datalogging thermo-hygrometer measures ambient temperature, relative humidity, dew point, and wet bulb temperatures as well as temperature with an integrated Type J/Type K thermocouple thermometer. The SD-3007 features automatic temperature compensation, Data hold, Max/Min functions, and an easy-to-read backlit LCD display. Using an SD card (max 16Gb), a user can select a desired sampling rate and quickly generate an Excel file without the use of software. Optional accessories include a tripod and AC adapter for continuous long-term monitoring. Optional PC software also allows a user to track live measurements.

Manufacturer: Advantech Brand: Advantech

Datalogging & Acquisition 32-ch Isolated Digital Input Card (RoHS)

Manufacturer: Mark-10 Brand: Mark-10 Model: SVC002

Calibration of Mark-10 gauges is recommended approximately once per year. Heavy usage or company policy may necessitate more frequent calibration. We have a fully equipped climate-controlled calibration laboratory and are capable of providing quick turnaround. All calibrated gauges and sensors include a NIST-traceable (National Institute of Standards and Technology) certificate