Recorders & Data Acquisition - Page 115

Manufacturer: TEMPSEN Brand: Alpha

Manufacturer: DeltaTrak Brand: DeltaTrak

Thermometer and probes are also available individually User should choose proper probe types for different applications. Make sure the target to be measured will not exceed the temperature range of the probe to avoid permanent damage to the thermocouple probe.

Manufacturer: Point Six Wireless Brand: Point Six Wireless Model: 1000-08

Ultra low temperature probe for measuring down to -200C. For use with the following sensors: 3008-02-V6 and 3008-02-V6-2

Manufacturer: DeltaTrak Brand: DeltaTrak

Applicable for measuring solid or semi-solid meats and frozen foods. Use the Penetration Probe for heavy duty and deeper probing.

Manufacturer: Supco Brand: Supco Model: TAL2

Set high and low alarms for 2 temperature sensitive applications and track their temperature trends, simultaneously. Programmable interval (1 sec. to 18 hrs.). Data rollover. Store 32,250 (single temp.) or 16,125 (dual temp.) data points. Battery backup. Software and cable included. Minimum System Requirements: 8MB of RAM, 2M of disk space, 800 x 600 resolution, 1 free COM port or a free USB port. Adjustable range from -50/86 degree F. Audible alarm and relay contacts. Relay contacts can connect to remote alarm dialer. Programmable alarm delay. Alarm event storage (up to 45 events). Measures 3" length by 1-3/32" width by 2-1/2" height, warranty: 1 year. Alarm channels: 2. Accuracy: +/-2 Percent. Probe: Encapsulated sensor with 15 ft. cord. Sensor type: Thermistor. Maximum probe extension: 300 ft. 48 volts, 100mA maximum. Power: 110V or 220VEU power adapter supplied. Battery backup: 9V alkaline battery (not included). Case: Hi-Impact thermoplastic. Remote alarm connections: Normally open (N.O.) closed on alarm.

Manufacturer: ADLINK Technology Brand: ADLINK Technology

Datalogging & Acquisition 24CH OPTO-22 DIGITAL I/O PCI CARD

Manufacturer: Lascar Electronics Brand: Lascar Electronics Model: EL-GFX-DTP+

The Lascar EL-GFX-DTP+ Dual Thermistor Data Logger Measures and Records Temperature using (2) external thermistor sensor probes. The data logger has a typical accuracy of +/-0.1C. The Lascar GFX Series data loggers feature a graphing lcd display, IP67 Waterproof construction, 3-button on-screen menu for restarting logger in the field, user-replaceable batteries with typical 4 month life, stores 252,000 total readings, a software-configurable sampling rate of 2 seconds to 1 hour and user configurable high/low alarms. The LCD display shows current recorded temperature readings (digital or graph), alarm and battery status. The EL-GFX-DTP+ also includes temperature triggered, immediate, delayed or push-button start modes. Using the supplied usb cable, all recorded data can be downloaded onto a windows PC and analyzed using the EasyLog Software, available for download. The software can also setup and configure your data logger features. Each purchase includes (2) type K thermocouple sensors, USB cover, (2) 1/2 AA lithium batteries, mounting clip, and micro USB cable. PC Software is available for download. Compatible with Windows 10, 8, 7, Vista and XP (32-Bit and 64-Bit Versions).

Manufacturer: MISOL Brand: MISOL

Introduction: Small simple and affordable, data logger can measure and record data at specified intervals ranging from once every 8 seconds to once every 4hours. You can connect it to the computer, and extract the data. There are 3 types of logging mode: Cycle Mode, Acyclic Mode, and Segmented Mode Cycle Mode: When the memory is full, the oldest data sets stored will be overwritten by the new ones entered. Acyclic Mode: when the memory is full, data record stops. (when memory is cleared via the PC software, Data record will restart.) Segmented Mode: You can set max. 4 time periods through the setting menu on the PC software. These periods can¡¯t be overlapped. The time period must be later than current time. It will start logging from the set start time and stop from the set end time in a time period. Features: Measure and log temperature and humidity data Instant data download with PC/laptop USB interface for set-up and data download Easily re-configurable using included software Selectable logging intervals from 8 seconds to 4h (default 5 minute) Selectable measurement in F D or Cel D Time, date and unit synchronized your PC Low battery indicator SPECIFICATION: Memory: Max. 20, 736 temperature and relative humidity readings Logging Interval: 8 seconds to 4h Measure Temperature Range: -40 to +60 Cel. D Temperature Accuracy: +/- 1 Cel. D (in the temperature range 0-50 Cel. D) Measure Humidity Range: 10% - 99% RH Humidity Accuracy: +/- 4% ( in the humidity range 20%-80%) Software: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10 Power: 1 unit of 3 V lithium battery Battery Life: 1 year typical. (depends on the sample rate, ambient temperature) Dimension: 92x62x18mm Package Contents: 1x data logger unit 1x USB cable 1x CD ROM 1x 3 V lithium battery CR2032 1x Instruction manual (English)

Manufacturer: ADLINK Technology Brand: ADLINK Technology

Datalogging & Acquisition 48BIT DIGITAL I/O PCIe CARD

Manufacturer: Thomas Scientific Brand: Thomas