Recorders & Data Acquisition - Page 127

Manufacturer: Graphtec Brand: Graphtec Model: GL100-WL

Graphtec GL100-WL GL100 Main Unit, Standard Model, Required to Use with Sensor Units or Input Adapters.   It is modular type that is able to support variety measurement by exchanging the input module. Multiple sensors and the input terminal are available for corresponding to the application. Easy measurement by multifunction input Available the software for PC & Smart devices Possible to check the data in multiple method Reliable measurement with useful functions Typical applications Sales network Flexible input module allows wide range of measurements The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.   Main body Input modules GL100-WL (with WLAN) GL100-N (without WLAN) Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.   Easy measurement by multifunction input The input module can be expanded to accommodate a wide variety of measurements   Dual port adapter connects up to two modules for simultaneous interface GL100-WL / N Dual port adapter Temp./Humidity sensor Illuminance/UV sensor GL100-WL / N Dual port adapter Temp./Humidity sensor Carbon dioxide sensor GL100-WL / N Dual port adapter Illuminance/UV sensor Carbon dioxide sensor It is not able to connect two sensors of the same type. Providing a variety of sensors and input terminals corresponding to the application. There is the following input module

Manufacturer: Advantech Brand: Advantech

Datalogging & Acquisition 96-bit digital I/O PCI-bus C98Card (RoHS)

Manufacturer: Testo AG Brand: Testo Model: 0572 1764

Testo 176 data loggers offer easy data collection, dual mode readout, USB interface, and SD card. ideal for equipment commissioning and troubleshooting. Inexpensive to install in multiple locations so you can perform a complete analysis. Record measurement values, max/min, date, time. All data saved, regardless of battery condition. Long-term and multi-channel temperature and humidity measurement. Channels: 4 x external. Measuring range: -328 degree to 752 degree F (Type T) -310 degree to 1832 degree F (Type K) -148 degree to 1382 degree F (Type J). Battery life (at 77 degree F): 8 years at 15 minimum measurement rate. Operating temperature: -4 degree to 158 degree F (-20 degree to 70 degree C). Battery type: 1 x Lithium (TLH-5903). Measuring Cycle: 1 sec - 24 hr. Memory: 2 million readings. Measures 2-1/2" length by 1-19/64" width by 4" height.

Manufacturer: Smacq Brand: Smacq

USB-2000 series DAQ card is one of your best choice with high efficiency and low cost together, with full fucntion LabVIEW support USB-2000 series DAQ, you can build your test and measurement system very easy! USB Specification of USB-2610 ● 16bit vertical resolution ● Top 125KSa/s ● 8 channel analog input ● Multiscale input,±24V(DIFF),±20V(DIFF),±10V,±5V,±2.5,±1.25V,±0.5V ● 8 channel isolation DI, 8 channel segregation DO ● Visual Studio, LabVIEW support ● USB2.0 High Speed interface Packing list ● When you open the package of a new USB series data acquisition card, the package should contain the following items. ● 1*USB Series Data acquisition card ● 1*USB-A TO USB-B cable ● Connecting terminal (depending on model) ● Connecting terminal ● 1*Data CD(Driver,Demo,Software) ● 1*Warranty notice

Manufacturer: Dickson Unigage Inc. Brand: Dickson

Our 6" (152mm) line of humidity chart recorders feature a sleek look and feel, precision pen movement, and a menu of features to best suit your applications.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 850013

A single dynamic 30 ~ 130 db range eliminates the need to manually select ranges and prevents data errors during range changes in auto-ranging models. All test parameters are simultaneously displayed on a large bright back-lit display featuring 0.1 dB resolution and a bar graph. Automatically log up to 31,000 records for later download, or manually save and recall 99 data points, with date and time stamp, directly on the meter’s LCD. The bi-directional USB port and software also enable control of the meter via its on screen image. Accurate within ±1.4 dB and meets or exceeds all other specs for an ANSI S1.4 and IEC 61672-1 Type 2 meter. Also features A/C and fast/slow weighting scales, min-max, over/under alarms, AC or DC recorder output and auto power off. Calibrate in compliance with OSHA using Acoustical Calibrator 850016. Comes in a foam lined, protective carrying case, complete with a windscreen, USB computer connection cable, software, instructions, calibration tool, and 4 AA batteries which provide about 30 hours of use. The optional microphone extension cable enables remote measurements. N.I.S.T. traceable certificate of calibration available. Dimensions: 10¾" × 3½" × 1½" (273 × 89 × 38 mm) Weight: 14.6 oz (414 g).

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-37250-00

The Oakton 37250-00 Hygrothermograph is a benchtop unit that has a three-speed rotation choices of 1, 7, or 32-days for humidity and temperature recordings. Hygrothermographs are used to measure and document humidity and temperature over time in computer rooms, greenhouses, food storage rooms, warehouses, museums, and in quality control (QC) laboratories, education, and research lab testing environments. This hygrothermograph features a quartz-controlled drive mechanism for consistent drum rotation throughout battery life, and a battery test indicator. It has an aged bimetallic strip temperature sensor for accurate pressure readings, and a human hair bundle relative humidity (RH) sensor for accuracy. This unit has a flashing LED to indicate drum rotation operation. This unit has a protective acrylic cover that locks into place for security. Its sturdy base, tinted cover and carrying handle are lightweight and corrosion-resistant for a range of use in indoor and sheltered outdoor environments. The three-speed hygrothermograph comes with one sheet of pre-attached chart paper, one red cartridge pen, and one blue cartridge pen. The unit is factory pre-set for a seven-day rotation. The hygrothermograph can be switched to either a one-day or 32-day rotation by flipping the switch on top of the cylinder drum. The response time is fifteen minutes for 45% of reading. The 37250-00 hygrothermograph has a relative humidity range of 5-90%, accuracy + or - 3% from 10 to 90 RH; + or - 5% from 5 to 10% RH. It has a human hair bundle sensor, and chart graduations of 1% RH. Temperature range -10 to 50 degrees C/14 to 122 degrees F, accuracy + or - 1 degree C/+ or - 1.8 degrees F. It has a bimetallic temperature strip sensor, and chart graduations of 1 degree C/2 degrees F. Chart rotation is one-day (26 hours), or seven-day (172 hours), or 32-day (810 hours). Exposure to RH levels above 90% can cause a decrease of about 7-10% RH in readings over the entire range due to temporary elongation of the hair bundle. When exposed to humidi...

Manufacturer: Dickson Unigage Inc. Brand: Dickson

Our 6" (152mm) line of humidity chart recorders feature a sleek look and feel and precision pen movement. The TH623 adds a digitial display, remote probe and alarms to make it our most versatile 6" (152mm) temperature and humidity chart recorder.

Manufacturer: Wotefusi Brand: Wotefusi Model: GY515

Channel:1/2 Display: 3.5 Inch Color Screen ,320*240 Pixels ,Electric current:0-20mA ,4-20mA Voltage:0-5V,1-5V,0-10V,0-10mV,0-100mV Input signal: thermal resistance :Pt100,Cu50,Cu53,BA1,BA2 Input impedance: standard current signal input 250 ohm Thermocrouple:S,R,B,K,N,E,J,T,F1,F2,WRE5-26,WRE3-25 Analog Output: 4-20mA(load resistance less than 380 ohm) Output signal: Alarm output: up to Four-way relay alarm output (optional)(Note: When the load exceeds the relay contact capacity, please do not directly with the load) Accuracy:0.2%FS+-1d Storage capacity: the internal Flash memory capacity of 48MB(it can be expanded) Power specification :24VDC Recording Interval:1s/2s/5s/10s/15s/30s/1m/2m/5m/10m/30m/60m(it can be set) Record time: the shortest record of 8 days Operating environment :Ambient temperature :-10-50'C ;relative humidity :10-90%RH ,isolated from strongly corrosive gas(Note:If the site environment is bad, please leave us a message when order.) Communication output: RS485/RS232 communication interface, configurable baud rate in the range of 1200-57600bps(optional) Operating Power: 24VDC+-10% Size: 160 x 80MM Processor: ARM64 (dual core) Package including : 1x Paperless Recorder

Manufacturer: DeltaTRAK inc Brand: DeltaTrak

The permanent records produced by these temperature chart recorders serve as corroborating evidence for insurance claims, quality assurance documentation and protection of your valuable products. Models are available from 5-Day to 90-Day transit periods with three temperature ranges. DeltaTrak's In-Transit Temperature Chart Recorder, Model 16000-16502, is a highly reliable, time and temperature strip chart recorder used to record environmental conditions encountered during storage and transportation of food, pharmaceuticals, chemicals, and other temperature-sensitive commodities in refrigerated trucks, rail cars, ocean and air freight containers. The In-Transit Temperature Chart Recorders are specially engineered with a light and durable case for superior and faster temperature response. These chart recorders provide maximum accuracy and generate a permanent record of transit conditions on a 36 inch (91 cm) strip chart. A view port allows the operator to visually confirm activation after pulling the start-up tab.