Recorders & Data Acquisition - Page 133

Manufacturer: Extech Instruments Brand: Extech Model: 42270

This versatile, low-cost datalogger includes a real time clock so you can program an immediate or delayed start time. You can also program high and low set points. The LED lights on the front panel flash when the datalogger is recording and reaches the set points. Set the flexible datalogging interval to collect sample data from 2 to 2 hours at 1 second increments. Place in small areas without AC outlets: refrigerators, freezers, vans, trucks, and storage crates Records up to 16,000 readings, 8,000 for each parameter Requires the docking station from the 26842-90 for programming and data download

Manufacturer: EISCO Brand: NEULOG Model: NUL228

NeuLog logger sensor measures salinity in solutions, and can be used to monitor ecological systems, analyze chemicals, and test water quality and environmental health for further study. The logger sensor has an attached probe with two flat electrodes for calculating salinity through an applied electrical signal, and three modes of measurement for multiple readings: percentage, parts per million (ppm), and milligrams per liter (mg/L). The logger sensor has an experiment duration of 1.0 second to 31.0 days, with 17 -bit analog-to-digital converter (ADC) resolution for reading a range of values. The salinity logger sensor can be used for chemistry, biology, environmental, earth science, biochemistry, and physics experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, are required for operati...

Manufacturer: EISCO Brand: NEULOG Model: NUL228

NeuLog logger sensor measures salinity in solutions, and can be used to monitor ecological systems, analyze chemicals, and test water quality and environmental health for further study. The logger sensor has an attached probe with two flat electrodes for calculating salinity through an applied electrical signal, and three modes of measurement for multiple readings: percentage, parts per million (ppm), and milligrams per liter (mg/L). The logger sensor has an experiment duration of 1.0 second to 31.0 days, with 17 -bit analog-to-digital converter (ADC) resolution for reading a range of values. The salinity logger sensor can be used for chemistry, biology, environmental, earth science, biochemistry, and physics experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, are required for operati...

Manufacturer: FLIR Systems Brand: Extech Model: WB200

View larger Hygro-Thermometer Datalogger Ideal for monitoring humidity and temperature levels in offices, factories, warehouses, storage rooms, freezers, shipping vans, and during flood restoration, the WB200 combines traditional dry/wet bulb operation (refillable water tank) with electronic circuitry to provide accurate readings and trouble-free operation, especially in dusty environments. A built-in fan provides fast response time. Additional Features Audible and visual alerts when temperature and humidity level is higher or lower than the user programmed High/Low set points. Datalogger with user programmable sampling rate (15 to 60 minutes) stores 100 records that can easily be recalled on the display. Measures Wet Bulb, Dew Point, Temperature (41°F to 122°F /5°C to 50°C) and Relative Humidity (0.0 to 99.9%RH). Includes Comes with four AAA batteries, 100-240V Universal AC adapter, and user manual.

Manufacturer: Reed Brand: REED Instruments Model: ST-4023

Conforms to IEC61672-1 Class 2 sound level meters. 1/2" electret condenser microphone. 4-digit LCD with bargraph indication. A and C frequency weighting. Fast and Slow time weighting. Maximum hold with elapsed time indication. Manual data memory and read. Datalogging function (99 sets). Analog AC and DC outputs. Includes batteries, adjustment screwdriver, wind shield ball, and instruction manual. Specifications: Measurement Range: 30 to 130dB. Resolution: 0.1 dB. Accuracy: +/-1.5 dB. Frequency Range: 31.5 Hz to 8 kHz. Frequency Weighting: A and C. Time Weighting: Fast and Slow. Microphone: 1/2" Electret condenser microphone. Display: 4 digital LCD, updated every 0.5s; quasi analog bar indicator 1 dB steps, 60dB display range, updated every 0.125s. Memory capacity: 99 data sets. Analog output: 2VACrms (f.s.), 10mVDC/dB. Power supply: Four 1.5V LR-6/AA size alkaline batteries, AC adapter. Battery life: about 50 hours. Measures 258mm length by 68mm width by 27mm height.

Manufacturer: Reed Brand: REED Instruments Model: ST-4023

Conforms to IEC61672-1 Class 2 sound level meters. 1/2" electret condenser microphone. 4-digit LCD with bargraph indication. A and C frequency weighting. Fast and Slow time weighting. Maximum hold with elapsed time indication. Manual data memory and read. Datalogging function (99 sets). Analog AC and DC outputs. Includes batteries, adjustment screwdriver, wind shield ball, and instruction manual. Specifications: Measurement Range: 30 to 130dB. Resolution: 0.1 dB. Accuracy: +/-1.5 dB. Frequency Range: 31.5 Hz to 8 kHz. Frequency Weighting: A and C. Time Weighting: Fast and Slow. Microphone: 1/2" Electret condenser microphone. Display: 4 digital LCD, updated every 0.5s; quasi analog bar indicator 1 dB steps, 60dB display range, updated every 0.125s. Memory capacity: 99 data sets. Analog output: 2VACrms (f.s.), 10mVDC/dB. Power supply: Four 1.5V LR-6/AA size alkaline batteries, AC adapter. Battery life: about 50 hours. Measures 258mm length by 68mm width by 27mm height.

Manufacturer: Senonics Brand: Senonics BLUEFIN Model: BLUEFIN

The Bluefin by Senonics is a Portable Wireless Data Logger that records Temperature and Humidity with an internal sensor. The unit is accurate to 0.3C (5C to 60C) and 2% RH (20% to 80% RH) . With user selectable alarms for both Temperature and Humidity, the Minnow 1.0 logger is perfect for Cold Chain Transport logging and many other datalogger uses. - Accurate to +/-0.3°C - Records 40,000 Temperature and Humidity Sampble Pairs - Operating Range -20C to +60C (-4F to 140F) - User selectable sample rates: 1 Second to 1 hour - Direct USB connection via micro-B USB cable (same as most cell phones) - Start Modes; start on disconnect, push button start, scheduled start, and real time logging - User selectable high and low alarm triggers for both temperature and humidity - Configure and record in both °C and °F - Dedicated alarm LED, flashes when alarm is triggered - Dedicated status LED, flashes green when logging and red when full- Rechargeable Lithium Polymer Battery can Typically go 6 Months before Recharge - Small robust mechanical design (1.97" x 2.68" x 0.79" or 50mm x 68mm x 20mm) - Circuit assembly is conformal coated (epoxy resin) to protect from wet and dusty environments - Free PC or Mac application for configuration and data extraction including .csv export - Designed and manufactured in the US - Product support from US and European headquarters - USB cable included

Manufacturer: Reed Brand: Reed Instruments Model: SD-230

This SD series pH and ORP datalogging meter is capable of measuring 0.00 to 14.00 pH and 0 to 1999 mV (ORP). The SD-230 features automatic temperature compensation, Data hold, Max/Min functions, and an easy-to-read backlit LCD display. Using an SD card (max 16Gb), a user can select a desired sampling rate and quickly generate an Excel file without the use of software. Optional accessories include a tripod and AC adapter for continuous long-term monitoring. Optional PC software also allows a user to track live measurements. Please note pH and ORP electrodes are sold separately.

Manufacturer: CEM Brand: CEM

This is a brand new CEM DT-173 certified digital sound / noise level datalogger. This meter has a built-in USB port which connects to a Windows PC for uploading the recorded data. This is an ideal instrument for noise monitoring in factory, school, business and traffic areas. This meter conforms to the IEC61672-1 Class 2 standards. This device operates on a 3.6V Lithium battery. This device is very accurate (+/- 1.4 dB) and durable, an ideal companion for your field projects. Please note that the FREE Windows software is provided AS IS. There is no software development kit nor engineering support for the software.

Manufacturer: Dickson Unigage Inc. Brand: Dickson

A great size coupled with 2-3 year battery life makes this 4-inch (101mm) temperature chart recorder a great temperature data collection tool.