Recorders & Data Acquisition - Page 25

Manufacturer: PR Electronics Brand: PR Electronics Model: 3102

Temperature Converter, Pt100 Input, mA/V Output, 24 VDC Supply

Manufacturer: AZ instrument Corp Brand: AZ instrument Model: AZ8809

PRODUCT SPECIFICATIONSAir temp. range : -20~70 C Air temp. resolution :0.1 C/ F Air temp. accuracy :+/-0.6 C (0~50 C), others +/-1.2 C Humidity. range :0%RH~100%RH Humidity resolution :0.1%RH Humidity accuracy :+/-3%RH (at 25 C, 10~90%RH,others +/-5%RH) Sampling points :16000 Button to on/off:YES USB Interface :YES LCD size (mm):51(H)x63(W) Storage temp.:-20~50 C Storage RH% :Humidity < 90% Dimension(mm):120x93x42 Weight :210G Battery :9V DC adaptor PACKING INFORMATION 1*Meter1*9V DC adaptor1*Manual1*warranty card1*Paper box1*software CD1*USB cable

Manufacturer: COLE-PARMER Brand: Lascar

The EL-USB-ACT stand-alone data logger measures and stores up to 127,232 AC and DC current readings over a 0 to 1000 amp DC measurement range (0 to 723 amps for AC). An energy monitoring mode allows power consumption cost to be displayed using user input voltage and cost per unit values with measured values. Voltage up to 1 V DC (700 mV AC) is measured directly in the millivolt measurement mode. Logged data is easily downloaded, graphed, and printed from a PC using software and USB cable supplied. The software allows for a clamp scaling factor (the clamp input-output ratio of amps to millivolts) to be entered for the current clamp used. Call our Application Specialist for the best NIST certificate for this product. What's Included: software on CD, USB cable, and two AA batteries. Energy monitoring mode quantifies your power consumption costs Compatible with user-supplied AC and DC current clamps Three operating modes: current, millivolt, and energy monitoring User-configurable logging options (immediate, delayed, and push to start) and alarm levels High-contrast LCD shows current, power, energy, and cost information Direct-to-USB interface for quick and easy downloading via supplied cable 4 mm banana plug inputs (19 mm spacing)

Manufacturer: Graphtec Brand: Graphtec Model: B-567-20

GL840 extension cable (2m)

Manufacturer: AZ instrument Corp Brand: AZ Instrument Model: 88181

Single Use Cold Chain PDF USB Data Logger 88181 Product Features This is disposable PDF USB data logger is newly developed for cold chain industry, and widely used in food, medical, chemical,transportation,electronic industries,after finish recording, you can put in into PC USB port, no need any driver and software,the data logger will automatically generate PDF formate temperature report, these permanent data records will offer you favorable evidence of product assurance. Product Specifications Temp. range:NTC thermistor, -30~70 C , -22~158 F Temp. resolution:0.1 C , 0.1 F Temp. Accuracy:+/-0.5 C Logging Type:Single Use Pouched size:105(L)*55(W)*2.5(T) mm Unpouched size:80(L)*43(W)*2.5(T) mm Sampling points:8192 readings Shelf Life:12 months shelf time Operating temp.:-30~70 C (Logging status); room temp.(PC status) Operating RH%:Humidity < 80% Storage temp.:-40~85 C Storage RH%:Humidity < 90% Weight: 10g Battery: 1pcs 3.0V CR2032 (installed before shipment) Sampling interval:30 seconds, 5,10,30,60,90,120 minutes Start delay:0, 5,30,45,60, 90,120 minutes Alarm range:-20~ -10?, -10~0?, 2~8?, 0~15?, 0~25?, 15~25?, others Alarm delay:0, 5,30,45,60, 90,120 minutes Alarm type:Single Event, Cumulative, Disable Operation keys:2 Keys (Start/Stop key & Mark key) LED indicator:REC, Low Bat., High alarm, Low alarm Standard Package 10*data logger 1*manual 1*paper box Quality Warranty We guaratee all our goods are 100% original one with top high quality,if there is any fake product ,we will return all your money back, thanks. Delivery methods We usually send the goods to you by international expess, such as DHL ,FEDEX, UPS, it takes 5-7 working days to your side, thanks.

Manufacturer: Testo AG Brand: Testo Model: 0572 1753

Testo 175 data loggers offer easy data collection, dual mode readout, USB interface, and SD card. ideal for equipment commissioning and troubleshooting. Inexpensive to install in multiple locations so you can perform a complete analysis. Record measurement values, max/min, date, time. All data saved, regardless of battery condition. Long-term and multi-channel temperature and humidity measurement. Channels: 2 x internal. Measuring range: -58 degree to 752 degree F (Type T) -58 degree to 1832 degree F (Type K). Battery life (at 77 degree F): 3 years at 15 minimum measurement rate. Operating temperature: -4 degree to 131 degree F (-20 degree to 55 degree C). Battery type: 3 x AIMn Type AAA or Energizer IP 65. Measuring Cycle: 10 sec - 24 hr. Memory: 1 million readings. Measures 2" length by 1" width by 3-1/2" height.

Manufacturer: Eaton / Control Automation Brand: Eaton / Control Automation Model: MFD-80-B

LCD Display, 80mm, w/keys

Manufacturer: Hioki Brand: Hioki Model: LR5042-20

The Hioki LR5042-20 Data Logger is a pocket-sized, lightweight data recorder with a measurement range of DC -5.000V to 5.000V for recording instrumentation signals and measuring analog outputs from sensors and other devices. The logger has two measurement modes (instantaneous value and statistical value) and recording intervals of 1, 2, 5, 10, 15, 20, and 30 seconds and 1, 2, 5, 10, 15, 20, 30, and 60 minutes. The logger can either record until memory capacity is full or record endlessly, overwriting old data. The logger measures 57 x 79 × 28 mm (2.24 x 3.11 x 1.10 inches) H x W x D, and weighs 105 g (3.7 oz.). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Its splash-proof construction is Ingress Protection certified IP54. Additional specifications include storage capacity and recording modes. Voltage testers detect electrical current in cables, cords, circuit breakers, switches, wiring, and other components of electrical systems. They can test for live circuits, proper grounding, adequate voltage, and flowing current. They might be used by homeowners to test electrical outlets or by linemen to test power lines. Available in a variety of styles and levels of sophistication, some models simply indicate the presence of electrical current, while others record or display the level of voltage conducted. Some have additional capability such as the ability to perform continuity tests.Hioki manufactures memory recorders, automatic test equipment, and electronic testing and measurement instruments. The company, founded in 1935, is headquartered in Japan and has a U.S. office in Cranbury, NJ.What's in the Box?LR5042-20 Data LoggerConnection Cable LR9802Instructions

Manufacturer: Onset Computer Corporation Brand: Onset

The HOBO UX120 Pulse Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals - from energy auditors to building commissioners - to easily track building energy consumption, equipment runtimes, and water and gas flow rates. The HOBO UX120 Pulse Logger is available in a standard memory model (UX120-017) capable of 500,000 measurements and an expanded memory version (UX120-017M) capable of over 4,000,000 measurements. Works with Onset's Energy & Power Meter to measure Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more. The T-VER-E50B2 Energy and Power Meter outputs (3) sets of pulses which are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calulate AC Current, AC Voltage, kW, Power Factor, VARs, and VA.--Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis

Manufacturer: Point Six Wireless Brand: Point Six Wireless Model: 3008-28-V6

Battery powered, WiFi Temperature sensor with Data Logger for use in harsh environments. Meets the following ratings: IP65, NEMA 1, 2, 4, 4X, 12, 13. Product is FCC, CE and IC Class B compliant and is ideal for monitoring and tracking temperatures in restaurants, grocery stores, hospitals, C stores, pharmacies, laboratories, data centers and refrigerated transport. Assists in FDA, JCAHO and Health Inspection regulatory compliance. Communicates with Industry Standard Access Points. Includes an integrated data logger with programmable log rates spanning from 2 minutes to 2 hours. The data logger capability insures no loss of data in the event of power or network outage. Temperature is sampled every 15 seconds. Combining this with a configurable time/temperature alarm enables instant notification of a problem, thereby protecting your assets from an equipment failure. Compatible with Modbus or BacNet by using a BB2-7010-06 protocol converter by Control Solutions, Inc.