Recorders & Data Acquisition - Page 96

Manufacturer: Thermco Brand: THERMCO

Exact measurement of temperature and time The Fridge-tag® 2v is a high-precision, electronic temperature monitor. It is 100% calibrated and has a measurement precision of +/- 0.5 °C. Temperature measurement occurs every minute throughout the entire monitoring time. This guarantees faultless and extremely accurate measurement results. Even if an alarm limit has been exceeded and the Fridge-tag®2v alarm is displayed, it accumulates each additional temperature threshold violation. The precision time measurement is generated by a built-in quartz. NIST/ILAC traceable.

Manufacturer: Supco Brand: Supco Model: CR87E

Event chart recorder voltage, sound, light remote reading with programmable, speed and mode ranges The Supco Event Recorder with remote sensor employs advanced microcontroller design that enables this versatile instrument to accurately record the presence of voltage, light and sound events. LED display can read length of event, time between events or total number of events. Selector switches located on the face panel allow for the recording of 3 different event modes at 4 different recording speeds. Standard adapter for 120 VAC operation (220 VAC optional). Battery backup assures normal operation during power interruptions. 12 Volt operation - Allows use in vehicular or marine operations. Furnished complete with 2 cartridge pens and 60 (6" diameter) assorted charts. Convenient fold down carrying handle. Snap-on extra support legs. Free standing or wall mounted (using existing keyhole slots located on back of the case). Weather proof NEMA type 4X (CSA type 4) case optional. Ambient operating temperature range: 32 degree F to 140 degree F. Ambient operating relative humidity: 96 percent Maximum. Chart speed selectable: 6 hours, 24 hours, 7 days, 31 days. Chart rotation mode Selectable - single turn or continuous. Chart speed accuracy: +/- 1 percent. Chart diameter: 6 inches. Display: 3 digit LED 0.5. Primary power supply: 120 VAC, 50/60Hz. Battery backup: 8 AA Alkaline batteries (not supplied). Battery life: 48 hours continuous use. Recording Pen: Ink type. Weight: 4 lbs, 7 oz. KEV Range: 24 VAC to 270 VAC (50/60Hz.) 24 VDC to 180 VDC. KEL Range: Illumination threshold range 18 Lux to 1900 Lux +/- 20 percent. KES Range: Sound threshold range 40 dB to 114 dB 1Khz +/- 20 percent. Event probes - KEV: AC/DC Voltage detecting with two wire clip leads. KEL: A sensitive photocell. KES: A sensitive audio transducer.

Manufacturer: EISCO Brand: NEULOG Model: NUL224

NeuLog logger sensor measures liquid flow rate, and can be used to monitor stream velocity and health, and calculate turbidity, and density versus flow rate for further study. The logger sensor has a probe to detect flow rate for calculating the velocity of liquids, and includes a threaded inlet/outlet pipe to attach the probe either directly to a faucet or to rubber hosing to connect the pipe to a test sample (hosing sold separately). The logger sensor has an experiment duration of 1.0 second to 31.0 days, and digital) resolution for reading a range of values. The logger sensor can be used for environmental, ecology, biology, chemistry, physics, and earth science experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, are required for operation depending on the device (PC, tablet, viewer...

Manufacturer: Medichoice Brand: MediChoice Color: Red

EKG paper from MediChoice comes in a range of sizes and configurations, including this 3-channel Z-fold, thermal red grid paper, which measures 8.5 inches by 11 inches. The shelf life of this and our other unimaged premium-grade thermal paper is five years when properly stored in original packaging, in darkness, and below 77 degrees Fahrenheit and 65 percent humidity. Once the paper has been imaged, the image is expected to last five years. The paper is made in America and is designed to provide consistent trace quality.

Manufacturer: Onset Computer Brand: Onset HOBO Model: UA-001-64-KIT

A miniature, waterproof one-channel temperature data logger, this model is value-priced for short-term shipping applications or long-term deployment. Data logger alarm LEDs flash if temperatures have exceeded user-set levels and delay options, and provide visible verification that temperatures have been within the desired range throughout deployment. This 64K model stores approximately 52K of 10-bit temperature readings. For accurate temperature measurement in sunlight a solar radiation shield is required (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield). KIT INCLUDES BASE-U-1 OPTIC BASE STATION & USB CABLE!

Manufacturer: Onset Computer Corporation Brand: Onset

The HOBO Pro v2 Temperature/External Temperature data logger is a weatherproof data logger with an external soil/water temperature sensor on a 6-foot cable useful for situations where just one temperature probe is required. An internal temperature sensor is also included.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 5396-0711

The Track-It AC Event Data Logger is a battery powered stand alone compact data logger that records up to 64,000 on/off cycles. Use the Track-It AC Event Logger to monitor cycle patterns of pumps, blowers and other electrical equipment powered by 120 or 240Vac. The unit is easily configured using the included Track-Itâ„¢ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours or can be set to store a sample at every event. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery. The Track-It AC Event Logger can also be used to record ambient temperature along with on/off cycles. This can help diagnose heat vs. cycle time issues. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. The multicolor LED indicator notifies the user of alarms, or general activity.

Manufacturer: ThinkTank Energy Products Inc. Brand: ThinkTank Energy Model: 99338

Measures and records 18 parameters, including: Current Watts, Minimum Watts, Maximum Watts, Power Factor, Volt Amp (apparent PWR), Cumulative Watt Hours, Average Monthly Kwh, Elapsed Time, Duty Cycle, Frequency (Hz), Cumulative Cost, Average Monthly $, Line Voltage, Minimum Volts, Maximum Volts, Current Amps, Minimum Amps, Maximum Amps. This meter records all the data as fast as once per second so you can see the load profile as it changes over the course of a day, week, or any time frame desired. The meter is in the same housing as the standard model and the LCD display operates exactly the same. But in addition, there is a USB connector on the side of the meter. The meter comes with needed software and a USB cable (same type as for digital cameras) to download the data directly to a PC.

Manufacturer: Cryopak Brand: Cryopak

This listing is for Each

Manufacturer: MadgeTech Brand: MadgeTech

The Volt101A-160mV is one of MadgeTech’s newest data loggers. It is part of a new series of low cost, state-of-the-art data logging devices. MadgeTech has taken the lead in offering the most advanced, low cost, battery powered data loggers in the world today. The Volt101A-160mV offers a 10 year battery life, 4Hz reading rate, a multiple start/stop function, ultra-high speed download capability, 1 million reading storage capacity, optional memory wrap, battery life indicator, optional password protection, programmable high-low alarms and more. The Volt101A-160mV is priced at $179 each and can be delivered from stock now. Our research has shown that the Volt101A-160mV is second to no other data logger when it comes to price and performance. Using the MadgeTech Software, starting, stopping and downloading from the Volt101A-160mV is simple and easy. Graphical, tabular and summary data is provided for analysis and data can in multiple units, using the Engineering Units function. The data can also be automatically exported to Excel® for further calculations. As the leader in low power data logger technology, MadgeTech continuously improves its products and develops solutions to meet ever-changing challenges. The Volt101A-160mV was designed with our customers in mind. MadgeTech offers free firmware upgrades for the life of the product so that data loggers already deployed in the field can grow with new technological developments. Units do not need to be returned to the factory for upgrades. The user can do this automatically from any PC.