Compound Gauges - Page 31

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312D-402CF

The PIC Gauge 312D-402CF pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry, fillable, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge features an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/2" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312D-404CC

The PIC Gauge 312D-404C pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry yet fillable 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge has an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/4" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 121TID24Y21

Perma-Cal P/N 121TID24Y21 (Dial Trim: Dampening | Misc. Options: NONE) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-022

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6004-4RCF

A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.

Manufacturer: CME Brand: CME Tools

* 5pcs 1/2 x 3x 6 X-Long Length degree carbide end mills 4flt, 3" flute length, 6" overall length s/e , center-cutting * 10% cobalt, micro-grain. New

Manufacturer: CME Tools Brand: CME

CAT40,BT40,NMTB40 heavy duty CNC Tool Tooling Cart,48 capacity DESCRIPTION: "CNC Tooling" Brands---The Best Quality on The Market---Sold Many Thousands to Distributors to put on famous label. Heavy duty all steel structure. Solid side panels for maximum strength & stability. Angled tray for easy, quick tool access from either side. Durable nylon inserts to help prevent damage. Heavy duty 5"x1-1/4" casters load rated at 1000 lbs 18" wide x 35" long x 35" high weight: 75 bls

Manufacturer: CME Tools Brand: CME Tools

SHXWG65 OPTICAL RADIUS ANGLE DRESSER CENTER HEIGHT: 2-1/2" MAX WHEEL DIA.: 8" MAX CONVEX ANGLE 95 DEGREE TANGENTIAL TRAVEL: 7/8" MODEL SHXWG65 VISUAL UNIVERSAL DRESSER ADAPTBLE TO SURFACE GRINDER AND UNIVERSAL TOOL GRINDER FOR DRESSING WHEEL INTO VARIOUS CROSS SECTIONS OF FLAT OR CURVED SHAPES BY SIGHTING THE DIAMOND POINT THROUGH THE LENS. RADIUS AND ANGLES CAN EASILY MADE PERFECTLY TANGENT-VISUALLY. INFOMATION : TOLL FREE: 1-800-254-0007

Manufacturer: Trerice Brand: Trerice Model: 800B

The Trerice 800B Utility Gauge is designed for general pressure indication requirements. This gauge provides reliable service at an economical cost. Wetted parts are bronze tube and brass socket.

Manufacturer: Open Source Steel Brand: Open Source Steel Model: SS316 Color: Stainless Steel

Technical Specs Compound Gauge Gauge Type - Liquid Filled, Ammonia Refrigerant - Dial Size 2-1/2" - Range 30" Hg Vac to 150 psi - Connection Size1/4" NPT - Case Material Stainless Steel - Case Color Stainless - Socket Material316 Stainless Steel - Tube Material316 Stainless Steel - Filled With Glycerin - Lens Material Acrylic - Ring Material Stainless Steel - Operating Temp. Range-40 Degrees to 200 Degrees F