Pressure Gauges - Page 4

Manufacturer: COLE-PARMER Brand: Dwyer

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure. The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages. What's Included: Two 1/8" NPT plugs, two 1/8" rubber tubing adapters, and three mounting adapters with screws The industry standard in indicating low air or gas pressures of positive, negative, or differential pressures Large, easy-to-read 4" (102 mm) dial No manometer fluid to evaporate, freeze, or cause toxic or leveling problems

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2304

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer Instruments, Inc.,230000,230000,Magnehelic 0.125-0-0.125 Zero Ctr Range

Manufacturer: Fluke Brand: Fluke Model: C3004IND

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 41642

Series 41 manifolds are also available with larger, easier to read 3-1/8" color-coded gauges in rugged steel cases with polycarbonate crystals. These gauges feature 1% accuracy (class 1) for an exact reading in critical charge systems.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 14G11B13F0GD

This Parker 14G11B13F0GD filter, pressure regulator, and lubricator two-piece combination is part of the 14 Miniature Series for pneumatic systems. The filter removes oil, water, and particulate as small as 5 micron; the regulator is a relieving type for venting excess pressure from the line; and the lubricator delivers oil over a wide range of air flows, with an adjustable delivery rate. The regulator and lubricator have polycarbonate bowls for resistance to oil, gas, and impact. The regulator has a twist drain. This element/regulator/lubricator unit has an operating pressure range of 2 to 125 pounds per square inch gauge (psig) and a high-flow 1/4" National Pipe Thread (NPT) port for a flow rate of 13 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Dwyer Brand: Dwyer

Pressure Transducer, Pressure Range 0 to 200 PSI, Accuracy +/-1%, Output 4 to 20 mA DC, Power Required 13 to 30 VDC, Process Connection 1/4 In MNPT, Material of Construction Stainless Steel, Housing Stainless Steel, Operating Temp 0 to 200 F, NEMA Rating 4X, Connector Type Mini Hirschman, Loop Resistance 0 to 1300 Ohms, Max Pressure 400 PSI, Thermal Error +/-0.02%

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9092/001

The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 0.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.

Manufacturer: Fluke Corporation Brand: Fluke Model: L215

SureGrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders. TP220 SureGrip test probes. TL224 SureGrip silicon test lead set. Foldable soft pouch with six pockets and hook-and-loop.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGW-08

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.