|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $233.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-414D/62MAX+
FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $239.58 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
|
The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $249.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $269.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP PLUS
Color: White
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP PLUS
Color: White
|
The Fluke FoodPro Plus dual infrared and RTD thermometer takes noncontact or contact temperature measurement and is used to monitor the temperatures of food products and foodservice equipment. This thermometer measures surface temperature from -35 to +275 degrees C (-31 to +527 degrees F) with an infrared sensor and measures internal temperatures from -40 to +200 degrees C (-40 to +392 degrees F) with a built-in fold-out resistance temperature detector (RTD) probe sensor. It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.The Fluke FoodPro Plus shows the maximum temperature for reference. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It has an integrated countdown timer and alarm to help monitor cooking and cooling intervals and food service line inspections. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with one 9V battery, a soft case, a calibration certificate with National Institute of Standards and Technology (NIST) traceability and the German Calibration Service (Deutscher Kalibrierdienst, DKD) traceability, and instructions. SpecificationsInfrared temperature range-35 to +275 degrees C (-31 to +527 degrees F)Infrared sensor accuracy0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degreeDistance-to-spot ratio2.5:1Infrared se...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $269.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4144616
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4144616
Fluke low energy universal battery charger.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $269.99 23% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-566
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-566
|
These infrared thermometers are extremely easy to use: just aim, pull the trigger, and read the display. The backlit display shows temperature readings in °F or °C; low-battery indication; and hold, scan, and max. Display holds for seven seconds. Under range and over-range conditions are also indicated on the display. Available for sale in the United States and Canada only. Fluke models 566 and 568 offer additional features including an innovative graphical display, adjustable emissivity through an easily selectable built-in material table , type K thermocouple input, datalogging, multiple language interface, two backlighting levels, and a rubberized housing that improve resistance to shock, damage, water, and dust. These meters also indicate min/max, dif, avg, two color flashing with audio high and low alarms, probe, log, and recall. The 568 has expanded datalogging capabilities, with internal memory for up to 99 datapoints, or unlimited datapoints through the USB interface direct to your PC. Easy trend analyze can be done through the use of FlukeView software. Ideal for maintenance diagnostics in demanding environments Laser targets your measurement area. For special surfaces such as concrete all Fluke models have adjustable emissivity (except Fluke 63)
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $287.68 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451082AS02L200#
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451082AS02L200#
The standard Ashcroft test gauge case style features a solid-front aluminum case with a hinged ring. The dial has a polished mirror band for pointer reflection to prevent parallax error. Pointer is a balanced-friction adjustable design with red knife edge tip for easy reading.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $449.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1503
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1503
|
The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...
-
5.0 of 5.0 with 19 Reviews
SALE PRICE: $651.19 15% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 845
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 845
|
Mid-West Instrument Backflow prevention assembly test kit includes 5 valve. The 835 is in the list of acceptable gages from both FCCC and HR-USC and CA-NV AWWA. Backflow test kits provide the capability for testing all brands of reduced pressure principle, pressure vacuum breaker, spill resistant vacuum breaker and double check valve backflow prevention assemblies. Over 30 years of input from Backflow technicians. Specially designed for testing backflow prevention assemblies. Soft-seated brass needle valves (with replaceable valve seats). Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Filter elements can be cleaned or replaced. Improved case with storage compartments for fittings and tools. Test procedures are laminated in clear plastic. 5 Year warranty. Gauge type diaphragm differential pressure. Dial size and range (4-1/2-inches) 0-15 psid/0-100 KPA. Differential pressure accuracy +/-0.2 P.S.I.D. (Descending). Working pressure: 200 psig. Body material: glass reinforced engineering thermoplastic. Wetted internals: EP elastomers, brass and 316 stainless steel metal parts. Line pressure gauge: 1-1/2-inches 0-200 psig. Hoses and end fittings: Buna-N jacket and liner. Schrader 1/4-inches brass coupler. Hose length: three (3) each/5-feet long (color-coded). Bleed tube, one each/4-feet long clear bleed tube. Adaptor fittings: (3) sets of brass fittings provided for hookup to all standard size test cocks. Temperature limitations: maximum 150 degree F/65 degree C. Measures 18-1/2-inches length by 9-inches width by 9-3/4-inches height. Freezing temperatures must be avoided.
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $2,011.45 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1587 MDT
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1587 MDT
|
The Fluke 1587 MDT advanced insulation and motor drive troubleshooting kit is designed for troubleshooting and preventive maintenance applications including three-phase motors, cables, switch gear, and in applications where testing is required without the need to break the circuit. The kit includes the Fluke 1587 digital insulation multimeter, Fluke i400 current clamp, and Fluke 9040 phase rotation indicator. The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) insulation multimeter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the c...
|
|