Pressure & Vacuum Gauges - Page 10

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: P33EA94EGMBNGP

This Parker P33EA94EGMBNGP filter/pressure regulator combination or "piggy-back" is part of the P33 Standard series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 5 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a polycarbonate bowl for resistance to oil, gas, and impact, a guard for protection, manual drain, and a pressure gauge. This element/regulator has an operating pressure range of 0 to 125 pounds per square inch gauge (psig) and a high-flow 1/2" National Pipe Thread (NPT) port for a flow rate of 191 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-2012-LCD

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.

Manufacturer: CME Tools Brand: CME Tools

ANNULAR CUTTERS SET 2" DEPTH HIGH SPEED STEEL---new---8PCS/SET INCLUDING 6 CUTTTERS WITH 2" DEPTH: 7/16", 9/16", 11/16", 13/16", 15/16", 1-1/16" and 2 PCS 1/4"X4" PILOTS. *CUTTERS WITH 3/4 WELDON SHANK *FITTED IN DELUXE HEAVY DUTY BOX. *ELIMINATES MULTI-STEP DRILLING. *LOWER COST PER HOLE.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGAB-09

The Series DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGAB come with a protective rubber boot to protect against short drops and rough handling.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGAB-11

The Series DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGAB come with a protective rubber boot to protect against short drops and rough handling.

Manufacturer: Parker Brand: Parker Model: 07E32A13AC

This Parker 07E standard series compressed air filter/regulator is for water and particulate removal, and air pressure control. This filter is a single-unit, integral, "piggyback" filter/regulator for space-saving installations and has a relieving-style regulator to exhaust excess pressure for increased performance and safe operation. It has a removable, non-rising knob for tamper resistance and male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 41233

All the same features as the regular “series 41” with 1% accuracy (class 1) brass gauges.

Manufacturer: Generic Brand: Generic

Includes: -M12 X 1.75 -M10 X 1.5 -M8 X 1.25 -M6 X 1.0 -M5 X 0.8 -M4 X 0.7 -M3 X 0.5

Manufacturer: SSI Technologies Brand: SSI Technologies Model: MG1-500-A-9V-R Color: Black/Blue

Digital Pressure Gauge, 2 1/2" dial, Automatic Shutdown after 3 min, SS sensor. The Media Gauge is a multi-functional Digital gauge. Contains a media isolated piezo resistive pressure sensing element, signal conditioning, a 304 sensing port and LCD back lit display. A battery saver is incorporated to automatically shut the LCD display off after 3 minutes prolonging the batteries life. Chemical Capabilities: Any Gas or Liquid compatible with 304L stainless steel. For example: Motor Oils, Diesel, Hydraulics, Water, Nitrogen, Air.

Manufacturer: Yellow Jacket Brand: Yellow Jacket Model: GIDDS-296819

2 Valve Manifold with 3-1/8" Gauges and 60" Hoses | Color-coded scales | Forged brass body for durability | Full porting maximizes capacity and flow | UL recognized for 4000 psi burst and 800 psi working pressure | For use with R-410A | Made in the USA - Manufacturer: Yellow Jacket.