Pressure & Vacuum Gauges - Page 241

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 115D-854C

These gauges have been designed and built primarily for the industrial market. They are well suited for all applications where bronze tube and socket are suitable for use. Some typical applications are; air, water, gas, oil and steam.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 140-AC-00-OO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.

Manufacturer: Lumenite Brand: Lumenite Model: LSPG-LM-F-C2"-160PSI

3A Sanitary pressure gauges ANSI grade 'A' accuracy and conforms to all 3A sanitary standards.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Test Products Intl Brand: Test Products Intl

The TPI 605 vacuum gauge measures vacuum in microns for accurate evacuation of refrigeration systems.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616W-4-LCD

Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD (as shown to the left) allows local indication of pressure.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6001-4LCF-GF

A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6001-2LCC-GF

A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6504-4RCF

The Precision Instrument Corporation model 6504 is a solid front process gauge with an aluminum front flange safety case with a black enamel finish. The aluminum black wrinkle enamel coated ring makes these gauges wells suited for panel board applications. The front screw lets users open the window and permits easy panel installation. There is a solid wall between the pressure sensing unit and the window, which provides greater safety for personnel monitoring the gauges. The bourdon tube with socket may be selected in brass, stainless steel or model material. If choose, for example, stainless steel, then all the internal parts such as bourdon tube, socket, movement, screws, washers, etc. will be stainless steel. The stainless steel sensing element is suitable use in corrosive media and the pressure system is not subject to damage.