|
|
-
4.9 of 5.0 with 22 Reviews
SALE PRICE: $122.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).
-
4.9 of 5.0 with 40 Reviews
SALE PRICE: $130.00 1% OFF
Manufacturer: APG
Brand: APG
Manufacturer: APG
Brand: APG
General purpose pressure sensor that offers reliable and accurate measurements under harsh conditions.
-
4.9 of 5.0 with 39 Reviews
SALE PRICE: $132.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
|
The Series MS2 Magnesense® II Differential Pressure Transmitter combines the proven stable Hall Effect sensing technology of our original Series MS with additional features to reduce installation time and simplify ordering. In this second generation transmitter, we have added additional field selectable pressure ranges so that each model can have four selectable ranges along with four additional bidirectional ranges. When using the pluggable integral display or the portable remote display tool, both Metric and English engineering units can be selected via on board dip switches. Dual current and voltage outputs allow users to simultaneously take either a current or voltage output to their building controller and have a local test circuit for verification of the output reading. The voltage output can be selected to be either 0 to 5 VDC or 0 to 10 VDC, while the current is always 4 to 20 mA. Both the current and voltage output can also be inverted. The MS2 can also be ordered with either a BACnet® or MODBUS® Communications protocol output that will allow the transmitters to be daisy-chained together. Like the original Series MS, the second generation transmitter can be used as a linear pressure output or a linear velocity output with the square root extraction done in the transmitter. Additional parameters have been included to expand the square root capability to include flow measurements.
-
4.9 of 5.0 with 8 Reviews
SALE PRICE: $140.75 1% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
Magnesense Differential Pressure Transmitter, 1", 2", 5" w.c. Range, 4-20mA Output, Duct Static Mounting, Velocity Flow Mode, Local Display
-
4.9 of 5.0 with 8 Reviews
SALE PRICE: $141.91 9% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 626-08-CH-P1-E5-S1
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 626-08-CH-P1-E5-S1
The Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing.
-
4.9 of 5.0 with 36 Reviews
SALE PRICE: $150.00 1% OFF
Manufacturer: HONEYWELL
Brand: Honeywell
Manufacturer: HONEYWELL
Brand: Honeywell
NEW HONEYWELL STG94L-E1G-00000-2J-B77P ST3Q00 PRESSURE TRANSMITTER D534273
-
4.9 of 5.0 with 8 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
The Dwyer® Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in ranges of vacuum, compound to 5000 psi with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
-
4.9 of 5.0 with 25 Reviews
SALE PRICE: $167.06
Manufacturer: Sper Scientific
Brand: Sper Scientific
Model: 840067
Manufacturer: Sper Scientific
Brand: Sper Scientific
Model: 840067
72.5 PSI Transducer For use with: Sper Scientific Wide Range Pressure Meter - 840065.
-
4.9 of 5.0 with 18 Reviews
SALE PRICE: $167.08 5% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: K17M0242C130#
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: K17M0242C130#
The Ashcroft K1 is a proven and versatile pressure Transmitter incorporating polysilicon thin film technology. Modern low-pressure chemical vapor deposition methods provide simple, stable molecular bonds between the metal diaphragm and a polysilicon strain gage bridge. There are no epoxies or bonding agents to contribute to signal instability or drift. The integral metal diaphragm and polysilicon bridge are virtually unaffected by shock, vibration or mounting. These transmitters are offered in many standard pressure ranges with either current or voltage output signals. Transmitter performance is directly traceable to the National Institute of Standards and Technology. A calibration test certificate is available with each transmitter
-
4.9 of 5.0 with 4 Reviews
SALE PRICE: $173.43 1% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 300-200-1-1-2-8
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 300-200-1-1-2-8
|
Compact OEM Pressure Transducers. Ruggedness and long term stability during operation were the focus in the design of this NOSHOK 300 series pressure transducer. As a result of this we were able to develop a transducer for use in general industrial applications with technical specifications exceeding those of transducers costing much more. A wide variety of electrical and mechanical connections are available for easy installation into most applications along with most popular analog output signals. All electrical components carry a high degree of EMC protection compliant with EN 61 326 which make it ideal for areas where RFI, EMI or ESD signals are present. The compact size makes it very attractive for applications where space is limited. Constructed of high quality stainless steel makes it compatible with chemically aggressive media. The sensor is welded directly to the process connection eliminating the need for any gaskets or seals while also increasing the resistance to mechanical stress. Applicable for hydraulic and pneumatic systems, pumps and compressors, stamping and forming presses, test equipment and systems, industrial machinery and machine tools. RoHS compliant. Electricity connection: Hirschmann (DIN EN 175301-803 Form A). 4 mA to 20 mA, 2-wire Output Signal. Process Connection: 1/4" NPT Male. 2 times Full Scale Proof Pressure. 6 times Full Scale Burst Pressure. +/-0.5 percent full scale (BFSL) Accuracy; (Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors). Repeatability: less than or equal to +/-0.05 percent Full Scale. Hysteresis: less than or equal to +/-0.1 percent Full Scale. Stability: less than or equal to +/-0.2 percent Full Scale per year, non-accumulating. Response time: less than or equal to 4 ms (between 10 percent and 90 percent Full Scale). Power supply 10 Vdc to 30 Vdc, unregulated. 316 stainless steel Housing material.
|
|