|
|
-
4.9 of 5.0 with 42 Reviews
SALE PRICE: $240.89 1% OFF
Manufacturer: Johnson Controls
Brand: Johnson Controls
Manufacturer: Johnson Controls
Brand: Johnson Controls
|
Technical Specification Item Electronic Pressure Transducer Range 0 to 750 psi Accuracy +/- 1% Output 4 to 20 mA Power Required 12 to 30 VDC Process Connection 1/4 SAE Flare Internal Thread Electrical Connections Packard with Wiring Harness Lead Length (In.) 78 Wetted Materials 17-4PH Stainless Steel Construction Housing 17-4PH Stainless Steel Construction Operating Temp. -40 to 185 Degrees F NEMA Rating 7 - Class 1, Division 2, Groups A, B, C, and D Loop Resistance Minimum Between Transducer Body and Any Wire, 100 MOhms @ 500 Vdc For Use With Any Corrosive or Non-Corrosive Pressure Medium That is Compatible With 17-4PH Stainless Steel, Including Water, Condensate, Carbon Dioxide, Glycol, Most Refrigerants Including Ammonia, and Many Other Compatible Fluids and Gases Compatible With All Media Compatible with 17-4PH Stainless Steel, Including Ammonia Manufacturers Warranty Length 3 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_
-
4.9 of 5.0 with 46 Reviews
SALE PRICE: $241.68 1% OFF
Manufacturer: Ashcroft
Brand: Ashcroft
Manufacturer: Ashcroft
Brand: Ashcroft
Technical Specification Item Pressure Transducer Range 0 to 30 psi Accuracy +/-0.5% Full Scale Output 4 to 20 mA at 12 to 30VDC Power Required 9 to 36VDC Process Connection 1/4 NPT Male Electrical Connections DIN 43650-A Wetted Materials Stainless Steel Housing 304 Stainless Steel Operating Temp. -40 to 257 F Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 60 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316 Stainless Steel Includes Instructions Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_
-
4.9 of 5.0 with 49 Reviews
SALE PRICE: $245.34 1% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 800-50/400-1-1-8-8-090-6
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 800-50/400-1-1-8-8-090-6
|
The NOSHOK Series 800 temperature transmitter provides an unbeatable level of performance at an economical price. Using the proven reliability and stability of 100 ohm platinum resistance technology, this transmitter offers a broad array of choices for the OEM and user alike. A rigorous test and inspection process is performed on all NOSHOK temperature transmitters prior to shipment to further ensure 100 percent "out of the box" reliability. Applicable for water systems, storage tanks, industrial machinery and machine tools, HVAC systems, refrigeration systems. +/-0.5 percent BFSL Accuracy. Burnout protected from 4 mA to 20 mA, 2-wire Output signals Sensor protection. 1/2" NPT male Process connections. Hirschmann (DIN EN 175301-803 Form A) Electrical connections. +/-0.5 percent Full scale. 10 to 30 VDC Power supply. Equal-to or less than VPower -10)/0.020 Amps Load. 316 Stainless steel wetted and housing material. -40 to 185 degree F Ambient Storage temperature. IP65 according to EN 60529/IEC 529 Environmental rating. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Reverse polarity, over-voltage and short circuit protection. Simple 2-key programming for set points, contact functions (N.O./N.C.), reset points, contact types (npn/pnp) and switching function (hysteresis/gate). Integrated password protection. Four-digit LED display. Scalable analog output. Fast response time. Reverse polarity, over-voltage and short circuit protection. Stem measures 6mm diameter by 9" length.
-
4.8 of 5.0 with 9 Reviews
SALE PRICE: $50.99 1% OFF
Manufacturer: SCHRADER BELLOWS
Brand: Schrader Bellows
Manufacturer: SCHRADER BELLOWS
Brand: Schrader Bellows
07R213Acsb Pressure Regulator
-
4.8 of 5.0 with 34 Reviews
SALE PRICE: $82.06 1% OFF
Manufacturer: Automation Components Inc. (ACI)
Brand: Automation Components Inc. (ACI)
Manufacturer: Automation Components Inc. (ACI)
Brand: Automation Components Inc. (ACI)
A/MLP-5-5 | ACI | Differential Pressure Sensor Transducer Unidirectional | 0-5" w.c. | 0-5 VDC
-
4.8 of 5.0 with 27 Reviews
SALE PRICE: $106.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2001-LCD
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2001-LCD
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.
-
4.8 of 5.0 with 31 Reviews
SALE PRICE: $122.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).
-
4.8 of 5.0 with 43 Reviews
SALE PRICE: $122.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).
-
4.8 of 5.0 with 40 Reviews
SALE PRICE: $124.99 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50426486
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50426486
|
The WIKA A-10 pressure transmitter is precision engineered and manufactured to fit many industrial and OEM pressure measurement applications. The rugged design provides resistance to vibration, shock, wide temperature variations, RFI and other extreme environmental conditions that are typical of industrial and OEM applications. Performance and reliability is enhanced by the all stainless steel welded measuring cell that eliminates the need for soft sealing materials that may deteriorate over time. The stateof- the-art manufacturing and assembly process increases the long term reliability of the A-10. Primary applications include process control and automation, hydraulics, pneumatics and machine controls. Pressure ranges: from 0 - 15 psi up to 0 - 10,000 psi. Non-linearity: +/- 0.5% BFSL ( +/- 0.25% available). RoHS-conformity. CE-conformity: Pressure equipment directive - 97/23/EC; EMC directive - 2004/108/EEC (Group 1, Class B) and immunity according to EN 61 326. Shock resistance: 500g according to IEC 60068-2-27 (mechanical shock). Vibration resistance: 10g according to IEC 60068-2-6 (vibration under resonance). Wiring protection: Overvoltage protection: 32 VDC, 36 VDC with 4-20 mA; Short-circuit protection - Sig+ to UB-; Reverse polarity protection - UB+ to UB-. Test pereference conditions according to IEC 61298-1: Relative humidity: 45-75%; Temperature - 59-77 degree F (15-25 degree C); Atmospheric Pressure - 86-106KPa (25.4…31.3 inhg). Weight: Approx. 2.8 oz. (80 g). Supply voltage: 8-30 DC (14-30 VDC). Process connection: 1/4 NPT Male. Electrical connection: DIN EN 175301-803 (DIN 43 650) with plug connector. 1,740 psi Over pressure safety and 7,975 psi burst pressure.
-
4.8 of 5.0 with 46 Reviews
SALE PRICE: $130.00 1% OFF
Manufacturer: APG
Brand: APG
Manufacturer: APG
Brand: APG
General purpose pressure sensor that offers reliable and accurate measurements under harsh conditions.
|
|