|
|
-
4.7 of 5.0 with 30 Reviews
SALE PRICE: $26.50
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-610
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-610
'Pipe Mounting Kit For Capsuhelic Gages'
-
4.7 of 5.0 with 18 Reviews
SALE PRICE: $27.20 1% OFF
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG52J25P
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG52J25P
This Square D Pumptrol 9013FSG52J25P electromechanical pressure switch with 60-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. This switch includes a copper pulsation plug. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
4.7 of 5.0 with 8 Reviews
SALE PRICE: $27.20 1% OFF
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG52J25
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG52J25
This Square D Pumptrol 9013FSG52J25 electromechanical pressure switch with 60-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. This switch includes slip-on connectors (load side terminals only). The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
4.7 of 5.0 with 8 Reviews
SALE PRICE: $27.51 11% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ805R1
Manufacturer: Winters
Brand: Winters
Model: PFQ805R1
|
The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...
-
4.7 of 5.0 with 20 Reviews
SALE PRICE: $27.60 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ890
Manufacturer: Winters
Brand: Winters
Model: PFQ890
|
The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...
-
4.7 of 5.0 with 1 Reviews
SALE PRICE: $27.99 1% OFF
Manufacturer: NAHVAC
Brand: Aftmk Replm for Coleman
Manufacturer: NAHVAC
Brand: Aftmk Replm for Coleman
This is a Brand New Gas Furnace Air Switch
-
4.7 of 5.0 with 43 Reviews
SALE PRICE: $28.00 1% OFF
Manufacturer: SENSATA
Brand: Sensata
Manufacturer: SENSATA
Brand: Sensata
LOW PRESSURE SWITCH, VAC:240, AMP:6, OVERALL DIMS:52-1/4"L, WEIGHT:12-OZ, ORIGIN:MEXICO, MFG BAG, ADDITIONAL # 312926-248
-
4.7 of 5.0 with 45 Reviews
SALE PRICE: $30.00 1% OFF
Manufacturer: Thuemling Instrument Group
Brand: SPAN
Model: LFS-210-7 BAR-G
Manufacturer: Thuemling Instrument Group
Brand: SPAN
Model: LFS-210-7 BAR-G
Metric BAR only single scale dial with 1/4" NPT male bottom pressure connection. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.
-
4.7 of 5.0 with 44 Reviews
SALE PRICE: $30.28
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-D
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-D
|
The NoShok 316 stainless steel sintered snubber has a male connection, comes with one of five standard grade discs, and operates in pressures up to 15,000 psi (103,420 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. It is available in A, B, C, D, or E grade discs to accommodate specific applications. The grade A disc is for use with gases and has an average air flow estimate of 0.25 L/min at 1 psi. The grade B disc is for use with gases and water and has an average air flow estimate of 0.63 L/min at 1 psi. The grade C disc is for use with water and light oil and has an average air flow estimate of 1.46 L/min at 1 psi. The grade D disc with light oil and has an average air flow estimate of 2.79 L/min at 1 psi. The grade E disc is for use with heavy oil and has an average air flow estimate of 3.14 L/min at 1 psi. The male connection is either 1/4" or 1/2" NPT (National Pipe Thread) rate. This snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to ...
-
4.7 of 5.0 with 26 Reviews
SALE PRICE: $30.83 15% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: H3
Manufacturer: Fluke Corporation
Brand: Fluke
Model: H3
Designed to absorb shock and protect your meter from rough handling, the Fluke H3 clamp meter holster has a convenient belt-loop with snap. Built-in pocket for lead storage. For 333 - 337 clamp meters. One year warranty.
|
|