Pressure & Vacuum - Page 113

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 52216977

The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.

Manufacturer: Winters Brand: Winters Model: PCC1026C

The Winters PPC series pressure gauge with brass wetted parts has a liquid-fillable circular dial enclosed in a PBT case and a lower mount male connection with 1/4" NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 1%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The chemical-resistant PBT (polybutylene terephthalate) case is color-coded for ease of process identification. The case comes in four different colors that are UV resistant and will not fade. The case is Ingress Protection certified IP65 for protection against solid objects including dust or liquids. The circular dial is 4" (100 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The dial has an aluminum anodized black pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The ring for the gauge is also PBT and the bourdon tube is phosphor bronze. The movement consists of OT59 brass gears and stainless steel 304 plates. The welding is a tin/copper alloy for pressures below 600psi (4,147kPa), and is a silver alloy for pressures 600psi (4.147kPa) and above. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for machinery, process lines, compressors, and hydraulics with heavy vibration and pulsation.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments,...

Manufacturer: FLOW ELECTRIC Brand: FLOW ELECTRIC

1 Flow Electric Pneumatic Pressure Unit 119434 (2291)

Manufacturer: Fluke Corporation Brand: Fluke Model: CS20MA

The Fluke CS20MA current shunt has a 4 to 20mA current range for AC and DC measurements on process control loops and is intended for use with Fluke ScopeMeter test tools. It has a 30V maximum safe voltage and a 10mV/mA output level. This current shunt has shrouded banana plugs for test tool connection.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: CME Tools Brand: CME Tools

Universal Right Angle Plate 5-1/2x8x10" smi-steel castings accurate ground Made of fine quality, fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for square and parrallel references. Ground finish: 0.0005' per 6" 5-1/2"(L)x8"(W)x10"(H) Weight: 36 lbs

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06E22B13AC

This Parker 06E22B13AC compact filter/pressure regulator combination or "piggy-back" is part of the Prep-Air II series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 5 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a polycarbonate bowl for resistance to oil, gas, and impact, with a metal guard and twist drain. This element/regulator has an operating pressure range of 2 to 125 pounds per square inch gauge (psig) and a high-flow 3/8" National Pipe Thread (NPT) port for a flow rate of 55 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: U Brand: U.A.A. INC.

Manufacturer: CME Brand: CME Tools

Accuracy 0.0012" to 0.0039" MADE OF HARDENED TOOL STEEL AND GROUND FOR HIGH ACCURACY. PRECISION AND HIGH QUALITY NEEDLE BEARINGS FOR ACCURACY. PARTS ARE SEALED CONCENTRICITY: 0.0002"

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-2833 Color: Stainless

Duro Pressure Gauge is 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5-Inches dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2-Inches male NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel. Quality made in USA.

Manufacturer: United Electric Brand: UNITED ELECTRIC