Pressure & Vacuum - Page 135

Manufacturer: Fluke Corporation Brand: Fluke Model: TP2

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals. Hard stainless steel probe tips. 2mm diameter tip for electronics work. Also compatible with AC72 CAT IV 600V, CAT III 1000V, 10 A rating. UL listed. 1 Year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP175 Color: Red/Black

Adjustable tip length, allowing increased safety and precision. Compatible with the TL22x series, TL238 and TL27 test leads. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. UL Listing. Probes always show correct category rating for tip being used. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6562'). 1 Year warranty.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 5396-9908

Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001:2008.

Manufacturer: THERM-O-DISC Brand: Therm-O-Disc

PRESSURE SWITCH, OPENS ON PRESSURE FALL, OPEN @ 126 PSI, RESETS @ 264 PSI, ADDL MOD#: HK02ZB126A, weight:2.6OZ, IN MFG BAG, ORIGIN:UNKNOWN

Manufacturer: Fluke Corporation Brand: Fluke Model: TP4

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals. Hard stainless steel probe tips. 4mm Diameter probe tip designed to fit securely into IEC electrical wall outlets. CAT IV 600V, CAT III 1000V, 10A rating. UL listed. 1 Year warranty.

Manufacturer: Sealed Unit Parts Company, Inc. (SUPCO) Brand: Supco

SLP90120, Sealed Unit Parts Company, Inc. (SUPCO), Supco Low Pressure Switch

Manufacturer: Ralston Instruments Brand: Ralston Instruments

Ralston QTHA2MS0 NPT Male Quick-test Adapter (1/4" Male NPT).

Manufacturer: Fluke Corporation Brand: Fluke Model: TP74

Manufacturer: Winters Brand: Winters Model: PFQ804R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-310B

Instrument valves for permanent installation. They mount in part A-316, A-317, type C Manometer connections or Magnehelic® Gage and connect to metal tubing or 1/8" pipe.