|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5100
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5100
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC72
Manufacturer: Fluke Corporation
Brand: Fluke
Model: AC72
The Fluke alligator clip-set of red and black clips have a pair of nickel plated jaws. The jaws have an 8mm (0.32") opening. Recommended for use with TL71 and TL75 test leads, they are CAT IV 600V, CAT III 1000V, 10A rated and UL listed. The over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip and improves steadiness in slippery hands. UL listed. The Fluke alligator clips are sold as one set per package.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $45.00 10% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9082/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9082/001
One red (signal) and one black (ground) 4mm banana contact. Consists of two adapters. Maximum signal voltage: 600V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. UL Listed.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $46.37 6% OFF
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG54J59M1X
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG54J59M1X
|
This Square D Pumptrol 9013FHG54J59M1X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 175 psi. The switch has a 4-way NPSC flange fluid connection and is suitable for use with a higher-horsepower motor with 2 hp or greater. The non-adjustable differential is 40 psi, and the adjustable cut-out range is 100-200 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. The maintained manual cut-out lever has auto and off positions. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $48.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-432
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-432
Steel cases are substantially constructed and finished in gray hammerloid. Molded plastic cases are gray, high density polyethylene
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $48.19 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP863
Manufacturer: Winters
Brand: Winters
Model: PFP863
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $49.50 1% OFF
Manufacturer: Restroom Direct
Brand: FootPull
Color: Metallic Gray Textured Powder Coat
Manufacturer: Restroom Direct
Brand: FootPull
Color: Metallic Gray Textured Powder Coat
The FootPull Hands-Free Restroom Door Opener allows you to open the restroom door using your foot so you don't have to touch that dirty door handle. Easy to install and use, this device is a a simple answer to an old problem. The FootPull comes with a pad on the inside so that it will not scratch your fancy shoes or exposed toes. Heavy Duty, One Piece 356 Aluminum, silver, textured finish
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $49.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9081/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9081/001
Dual banana plug 4mm male to female BNC adapter. Consists of two adapters. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $50.19 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: MM-80
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: MM-80
|
The Dwyer Mark II MM-80 inclined differential manometer with red gauge fluid has a 0 to 80 mmH2O measuring range, built in zero level and molded plastic case for monitoring air velocity and air filter performance, and taking pressure measurements above and below atmospheric pressure. Red gage fluid is freeze-proof and has lower evaporation rate for use in cold environments, and produces expanded scale viewing for improved reading resolution. The built-in zero level provides linear calibration. The manometer has a styrene-acrylonitrile housing, indicating tube, and fluid wells for strength and durability. The molded ABS knobs and zero adjust plunger and shock-mounted glass level vial are wear-resistant. Leakproof O-ring seals and overflow tank reduce the risk of fluid loss. Scales are lithograph printed on aluminum to ease reading, and are epoxy coated to protect against wear. The manometer can be mounted on any vertical surface. SpecificationsPressure typesSingle and differentialMedia typeAirCase materialStyrene-acrylonitrileMeasuring range0 to 80 mmH2OFluid typeRed gauge fluid, 0.826 sp. gr.MountStand and vertical mountAccuracy+ or - 3% full scaleMaximum pressure10 psi/70 kPaMaximum temperature140 degrees F/60 degrees CWeight1.04 lbs./472gDimensions5-29/32 x 7-13/32 x 2-1/4inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of ...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $54.08 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP931R1
Manufacturer: Winters
Brand: Winters
Model: PFP931R1
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
|
|