Pressure & Vacuum - Page 174

Manufacturer: Winters Brand: Winters Model: PFQ2418

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: NAHVAC Brand: Aftmk Replm for Intertherm

This is a Brand New Gas Furnace Air Switch

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 201L-254J

An inexpensive utility gauge for the broad commercial and industrial markets. Suitable for air, water, oil, gas or any other media not corrosive to brass.

Manufacturer: Fluke Corporation Brand: Fluke Model: AC173

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Guardair Brand: Guardair Model: LZR650006AA

With a unique, ergonomic, pistol-grip design, the LZR650 Pistol Grip Series provides extended reach capability and fatigue-free operation. Integrated hanging eyelet for easy storage and retrieval. Powerful, accurate. Perfect for automotive and industrial cleaning applications.

Manufacturer: DURAKOOL Brand: DURAKOOL

Price for: Each 1 . Beam Angle: 15. Beam Angle: 15. Circuitry: SPST. Contact Current Max: 500mA. Contact Resistance Max: 30mohm. Leaded Process Compatible: No. Maximum Included Angle: 15. Mounting Type: Clip. Output Current: 1A. Output Current: 1A. Peak Reflow Compatible (260 C): No. RoHS Compliant: No. SVHC: To Be Advised. Sensor Body Material: -. Sensor Body Material: -. Series: A1

Manufacturer: Parker Brand: Parker Model: R344-02A

19 scfm at 100 psi inlet pressure with 90 psig no flow secondary setting and 10 psig pressure drop.

Manufacturer: Winters Brand: Winters Model: PFQ811R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Coilhose Pneumatics Brand: Coilhose Pneumatics Model: TGC090

These Air Inflator Gauges are manufactured with a chrome plated zinc body and all brass internal components for long term durability. A two position lever serves the dual purpose for gauging and inflating operations. The triangular shaped indicator bar is easy to read and shows measurement in both PSI and kPa. The inlet connection is 1/4” NPT female with a 3/8” – 24 UNF female thread hose connection outlet.

Manufacturer: PRM Brand: PRM

PRM 2.5 Inch Stainless Steel Pressure Gauge SS 1/4" NPT Bottom 0-150 PSI NEW IN BOX 2.5" SS PRESSURE GAUGE 0-150 PSI 1/4" NPT BOTTOM CONNECTION STAINLESS STEEL CASE, INTERNALS, & FITTING LIQUID FILLED