|
|
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $29.60 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PETM217
Manufacturer: Winters
Brand: Winters
Model: PETM217
Economical pressure gauge and valve body assembly used for pressure testing. Swivel hose adaptor on the water test gauge. Black steel case. 5 year warranty. Dual scale (psi/kpa). CRN registered. Applications: residential and commercial pressure testing of gas, air and water lines. Case: steel painted black. Lens: polycarbonate. Ring: steel, painted black. Bourdon tube: phosphor bronze. Movement: brass. Pointer: aluminum, black. Maximum pointer: available on water test gauge only. Welding: #50 tin solder. Working pressure maximum 75 percent of full scale value. Accuracy +/-3-2-3 percent ANSI/ASME Grade B. Enclosure Rating IP52. 0-300 psi/kPa. 2.5" Dial display. Connection: 3/4" Female swivel hose. Ambient/process temperature: -40/150 degree F. Water Test: 32/150 degree F.
-
4.5 of 5.0 with 22 Reviews
SALE PRICE: $29.60
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG2J27X
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG2J27X
|
This Square D Pumptrol 9013FHG2J27X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 100 psi. The switch has a 1/4" NPSF internal fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp power or less. The non-adjustable differential is 20 psi, and the adjustable cut-out range is 40-100 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
4.5 of 5.0 with 39 Reviews
SALE PRICE: $29.60 1% OFF
Manufacturer: MICROCHIP
Brand: MICROCHIP
Manufacturer: MICROCHIP
Brand: MICROCHIP
MICROCHIP MCP130T-460I/TT SUPERVISOR, 5K PULL UP, SOT-23-3
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $29.86 13% OFF
Manufacturer: Parker
Brand: Parker
Model: R364-02C
Manufacturer: Parker
Brand: Parker
Model: R364-02C
High Flow: 10 SCFM (Air) and 1.25 GPM (Water). 10 scfm at 100 psi inlet pressure with 90 psig no flow secondary setting and 10 psig pressure drop.
-
4.5 of 5.0 with 12 Reviews
SALE PRICE: $30.00 1% OFF
Manufacturer: Thuemling Instrument Group
Brand: SPAN
Model: LFS-210-700 BAR-G
Manufacturer: Thuemling Instrument Group
Brand: SPAN
Model: LFS-210-700 BAR-G
Metric BAR only single scale dial with 1/4" NPT male bottom pressure connection. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $30.51 49% OFF
Manufacturer: Kodiak Controls Inc.
Brand: Kodiak Controls
Model: KC25-5#
Manufacturer: Kodiak Controls Inc.
Brand: Kodiak Controls
Model: KC25-5#
Pressure Gauge 5 PSI, incorporates Capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection
-
4.5 of 5.0 with 437 Reviews
SALE PRICE: $30.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TL175E
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TL175E
|
TwistGuard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.
-
4.5 of 5.0 with 22 Reviews
SALE PRICE: $31.20
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG59J59
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FHG59J59
|
This Square D Pumptrol 9013FHG59J59 air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 175 psi. The switch has a 1/4" NPT external fluid connection and is suitable for use with a higher-horsepower motor with 2 hp or greater. The non-adjustable differential is 40 psi, and the adjustable cut-out range is 100-200 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
4.5 of 5.0 with 23 Reviews
SALE PRICE: $31.76
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG2J18
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG2J18
This Square D Pumptrol 9013FSG2J18 electromechanical pressure switch with 20-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. This switch includes a copper pulsation plug. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
4.5 of 5.0 with 3 Reviews
SALE PRICE: $32.27 1% OFF
Manufacturer: International Comfort Products
Brand: INTERNATIONAL COMFORT PRODUCTS
Model: 1170926
Manufacturer: International Comfort Products
Brand: INTERNATIONAL COMFORT PRODUCTS
Model: 1170926
The International Comfort Products 1170926 Pressure Switch is a manufacturer's replacement part and is compatible with models: FBF050B12A3, FBF050B12A4, FBF050B12G1, FBF075B12A3, FBF075B12A4, FBF075B12A5, FBF075B12G1, FBF075F16A3, FBF075F16A4.
|
|