|
|
-
4.5 of 5.0 with 21 Reviews
SALE PRICE: $299.00 1% OFF
Manufacturer: Endress Hauser
Brand: Endress & Hauser
Manufacturer: Endress Hauser
Brand: Endress & Hauser
Endress Hauser pressure transmitter 4-20 mA PMP48 PC29YBH1KJG1
-
4.5 of 5.0 with 32 Reviews
SALE PRICE: $303.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A3302
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A3302
|
Photohelic Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic gage design. The Photohelic switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) WC up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar). Photohelic Sensing - How It Works in typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation. Relay-Transformer Features. A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.
-
4.5 of 5.0 with 21 Reviews
SALE PRICE: $323.00 1% OFF
Manufacturer: Marshalltown
Brand: Marshalltown
Manufacturer: Marshalltown
Brand: Marshalltown
Offer is for one of the best quality temperature probe gauge made by Marshalltown (USA). This new heavy duty dial gauge has a steel case and a 3x glass face with a brass 1/2" NPT bottom mounting thread, a soldered copper probe (1/4" diameter 3" long). There is a manually adjusting dial for indicating high temperature readings and is resettable. There is an adjusting screw on back for calibrations. This gauge is a must for quick visual temperatures readings of liquids or air temperature. This very expensive and precision gauge is being sold cheaply. Limited Supply.
-
4.5 of 5.0 with 56 Reviews
SALE PRICE: $341.07 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 424D
Color: Multicolored
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 424D
Color: Multicolored
FLUKE FLUKE-424D DISTANCE METER, LASER, 100M
-
4.5 of 5.0 with 38 Reviews
SALE PRICE: $352.31 1% OFF
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: 07B37B18A4BD
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: 07B37B18A4BD
|
Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
-
4.5 of 5.0 with 21 Reviews
SALE PRICE: $384.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DA-31-2-9
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DA-31-2-9
The Mercoid D Series is one of the world's broadest lines of pressure switches. Whatever your application might be, it is most probable it can be fully satisfied with a D Series pressure switch. The D Series has extremely high sensitivity and great repeatability. The DA Models are equipped with two external adjustments, one for setting high pressure operating point, the other for setting low pressure operating point. Deadband, the difference between high and low set points, is adjustable over the full scale. The DS Models are equipped with a single external adjustment for setting operating point only. The deadband is fixed at a factory setting and cannot be altered in the field. For switches choose between the snap action switch, hermetically sealed snap action switch and hermetically sealed mercury switch.
-
4.5 of 5.0 with 42 Reviews
SALE PRICE: $386.63 1% OFF
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 6002-4RA-GF
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 6002-4RA-GF
A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.
-
4.5 of 5.0 with 41 Reviews
SALE PRICE: $399.00 1% OFF
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
16" - 3 JAWS Self-Centering T.I.R.----0.003" PRECISION SEMI-STEEL BODIES. TOP QUALITY. AMERICAN STANDARD. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. STRAIGHT RECESS OR PLAIN BACK. SPINDLE MOUNTING. 5-1/2"(138mm) THRU HOLE DIAMETER Diameter of back screw circle: 368mm Diameter of back recess circle: 340mm Body height:100mm Overall height: 172mm
-
4.5 of 5.0 with 28 Reviews
SALE PRICE: $400.00
Manufacturer: Allen Bradley
Brand: Allen-Bradley
Manufacturer: Allen Bradley
Brand: Allen-Bradley
836T-T254J - Allen-Bradley 836t Pressure Controls Allen Bardley 836-T pressure control switch, compact easy to install, traditional machine tool T- style device pressure control switch with 2 circuits, enclosure type 4/13 pressure switch. Specifications : Manufacturer : Allen Bradley Cat. No. : 836TT254J Alternate Part No. : 836TT254J Product Type : Pressure Control Switch Contact Configuration : SPDT Enclosure : NEMA 1, 4, 13 836t Pressure Controls - Traditional Machine Tool T - Style Pressure Control. 20...300 Psi. Enclosure Type 1 4 And 13 Industrial Use.. S.P.D.T Material : Copper Alloy Bellows. 2 - Circuit Contact Block. Authentic Allen Bradley Product.
-
4.5 of 5.0 with 14 Reviews
SALE PRICE: $449.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 28II
Color: Multicolored
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 28II
Color: Multicolored
|
The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility.
|
|