|
|
-
4.4 of 5.0 with 6 Reviews
SALE PRICE: $91.80 1% OFF
Manufacturer: ANALOG DEVICES
Brand: ANALOG DEVICES
Manufacturer: ANALOG DEVICES
Brand: ANALOG DEVICES
ANALOG DEVICES ADM1813-10AKSZ-RL7 RESET CIRCUIT, MPU, #1, SC-70-3
-
4.4 of 5.0 with 27 Reviews
SALE PRICE: $92.48 1% OFF
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: P32EA93EGMBNGP
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: P32EA93EGMBNGP
|
This Parker P32EA93EGMBNGP filter/pressure regulator combination or "piggy-back" is part of the P32 Compact series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 5 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a polycarbonate bowl for resistance to oil, gas, and impact, a guard for protection, manual drain, and a gauge. This element/regulator has an operating pressure range of 0 to 125 pounds per square inch gauge (psig) and a high-flow 3/8" National Pipe Thread (NPT) port for a flow rate of 123 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
-
4.4 of 5.0 with 12 Reviews
SALE PRICE: $92.65 1% OFF
Manufacturer: EXAR
Brand: Exar
Manufacturer: EXAR
Brand: Exar
EXAR SP690AEN-L SUPERVISORY CIRCUIT LOW POWER, 690
-
4.4 of 5.0 with 41 Reviews
SALE PRICE: $93.53 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 52295699
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 52295699
The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.
-
4.4 of 5.0 with 3 Reviews
SALE PRICE: $93.53 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 52216837
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 52216837
The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.
-
4.4 of 5.0 with 2 Reviews
SALE PRICE: $94.00
Manufacturer: United Electric
Brand: UNITED ELECTRIC
Manufacturer: United Electric
Brand: UNITED ELECTRIC
-
4.4 of 5.0 with 11 Reviews
SALE PRICE: $95.85 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PPC5069
Manufacturer: Winters
Brand: Winters
Model: PPC5069
|
The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...
-
4.4 of 5.0 with 31 Reviews
SALE PRICE: $95.85 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PPC5043
Manufacturer: Winters
Brand: Winters
Model: PPC5043
|
The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...
-
4.4 of 5.0 with 33 Reviews
SALE PRICE: $95.87 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PPS5043R1Z
Manufacturer: Winters
Brand: Winters
Model: PPS5043R1Z
|
Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/4" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist.
-
4.4 of 5.0 with 40 Reviews
SALE PRICE: $95.87 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PPS5065R1Z
Manufacturer: Winters
Brand: Winters
Model: PPS5065R1Z
|
Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/2" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist.
|
|