Pressure & Vacuum - Page 226

Manufacturer: AC DC Marine, Inc.TM Southern California Brand: AC DC Inc.TM

Pyrometer Exhaust Temperature Gauge A custom AC DC Inc.TM Gauge to measure temperature of the engine exhaust. Fahrenheit Degree Measurement Choose from Black or White display Illuminated Pointed and Backlit LED Dial 12 VDC Internal Illumination Pointer color - Red fluorescent Stainless Steel Polished Bezel A standard 2" hole installation. THERMOCOUPLE NOT INCLUDED

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06E24A21AC

This Parker 06E24A21AC compact filter/pressure regulator combination or "piggy-back" is part of the Prep-Air II series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 40 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a metal bowl for strength and durability, a twist drain, and a sight gauge for checking pressure. This element/regulator has an operating pressure range of 5 to 250 pounds per square inch gauge (psig) and a high-flow 3/8" National Pipe Thread (NPT) port for a flow rate of 55 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: SHINA Brand: SHINA Model: DDQ-withblowing-NO

Feature: Product model: SK-66B-KC. Output mode: B:NC(normally open) Pre trip: Almost 0 Trip: 5mm Repeat positioning accuracy: 0.001mm(operation speed:50-200mm/min) Life: 3000000 times. Contact force: 1.5N Outer shell: Grinding 4S. Protection: IP67. Cutter head: Diameter 20mm, hard carbide. Shock rating: 20mA(MAX) DC24V recommended value(10mA)resistive load Cable: 3M 4-cell tensile strength 30N Minimum bending radius R7 Protection Tube: 1M (Minimum bending radius R25) Ultra travel alarm: Exceed the specifications: NC(Normally open),distance signal about 5mm Shock rating: DC24V 20mA(MAX) 10mA(Resistive load). Classification: Normally open with stroke protection and blowing Installation Instructions: 1. The tool and make sure the contact surface on the knife perpendicular, and vertically downward into contact with the contact surface, please try to install the relatively small iron bench in place 2. Be sure to use within the rated power range, please control voltage DC5-24V, the current below 20mA, the use of ambient temperature range -25oC ~ 70oC. 3. Please knife tool diameter 20mm diameter or less control of the cutting speed please controlled 50-200mm / min, the tool center to fall on the flank of the center. 4. When use of blowing function, the outer diameter of tube diameter 6mm, inner diameter of diameter 4mm. Note that cleaning the contact surface attached to the iron and cutting oil. Package Include: 1 x Z Axis Presetter with blowing.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-1112

The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-1112

The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Manufacturer: Winters Brand: Winters Instruments Model: PFQ1535

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: HUNHEWUHUA Brand: HUNHEWUHUA

Model Rated pressure Max pressure Weight JCS-02N 20-210 kg/cm2 230 kg/cm2 1.0kg JCS-02NL 15-60 kg/cm2 230 kg/cm2 1.0kg JCS-02NLL 5-40 kg/cm2 60 kg/cm2 1.0kg JCS-02H 20-500 kg/cm2 600 kg/cm2 1.0kg Max voltage/current 250V/3A 125V/5A Min voltage/ current DC 24V/ 160 mA

Manufacturer: Dwyer Instruments Brand: Dwyer Model: ISDP-015

The ISDP Differential Pressure Transmitter provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. The ISDP offers simplified programming via a Menu key that enables the user to select: security level; English or Metric engineering units; pressure, velocity or flow operation, K-factor for use with various Pitot tubes and flow sensors, circular or rectangular duct size for volumetric flow operation plus many more. The Series ISDP Differential Pressure Transmitter is powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector. The ISDP provides a 0.5% full scale accuracy on ranges from 0.25" WC to 100" WC as well as bi-directional models up to 10" WC These features make the Series ISDP Differential Pressure Transmitter the ideal instrument for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.

Manufacturer: United Electric Brand: UNITED ELECTRIC

15Amp 125/250VAC

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 50 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 1 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.