Pressure & Vacuum - Page 228

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-9-400-N

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: MILTON INDUSTRIES INC Brand: Milton Industries

Dh Chuck Gauge-3Pack.

Manufacturer: CATIC Brand: CATIC

Air and other non-combustible, non-aggressive gases Monitor overpressure, vacuum and differential pressure for air and compatible gases. Possible applications are: monitor air filters and ventilators monitor air status in heating and cooling circuits monitor flows in ventilation duct other applications

Manufacturer: BARKSDALE Brand: Barksdale Model: 96211-BB4

Barksdale 96211-Bb4 Pressure Switch 22.5-125Psi .16-.86Ma 125/250Vac 5A

Manufacturer: WIKA Brand: WIKA

NEW WIKA 4334711 332.34 0-30IN-HG 4-1/2 IN 1/2 IN NPT TEST GAUGE D526046

Manufacturer: Winters Brand: Winters Model: PSB646R1Z

StabiliZR dampened movement minimizes effects of pulsation and vibration without liquid filling. Stainless steel case. Bottom mounted. Stainless steel 316 wetted parts. CRN registered. 5 Years warranty. Ideally suited for process, chemical and petroleum industry. Where chemical compatibility and contamination is a concern. Dial: 4" white aluminum with black and red markings. Case: AISI stainless steel 304 (dry). Lens: polycarbonate. Ring: AISI stainless steel 304 bayonet. Socket: stainless steel 316. Connection: 1/4" NPT bottom. Bourdon tube: stainless steel 316. Movement: stainless steel 304, dampened. Pointer: aluminum, anodized black, micrometer adjustable. Over-pressure limit: 30 percent. Socket gasket: 2-1/2" (63mm): buna N for two-piece internal socket seal. Fill plug: buna N. Lens ring gasket: silicone rubber. Ambient/process temperature: -40/250 degree Fahrenheit. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-1 percent ANSI/ASME grade 1A. Pressure range: 0-200 psi. RoHS compliant.

Manufacturer: Winters Brand: Winters Model: PSB644Z

StabiliZR dampened movement minimizes effects of pulsation and vibration without liquid filling. Restricted orifice standard on dual scale. Stainless steel case. Bottom mounted. Stainless steel 316 wetted parts. CRN registered. 5 Years warranty. Ideally suited for process, chemical and petroleum industry. Where chemical compatibility and contamination is a concern. Dial: 4" white aluminum with black and red markings. Case: AISI stainless steel 304 (dry). Lens: polycarbonate. Ring: AISI stainless steel 304 bayonet. Socket: stainless steel 316. Connection: 1/4" NPT bottom. Bourdon tube: stainless steel 316. Movement: stainless steel 304, dampened. Pointer: aluminum, anodized black, micrometer adjustable. Over-pressure limit: 30 percent. Socket gasket: 2-1/2" (63mm): buna N for two-piece internal socket seal. Fill plug: buna N. Lens ring gasket: silicone rubber. Ambient/process temperature: -40/250 degree Fahrenheit. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-1 percent ANSI/ASME grade 1A. Pressure rang: 0-100 psi/kPa. RoHS compliant.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9314555

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is three inches in diameter and enclosed in a forged brass case for increased durability in corrosive environments. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to + or - 2/1/2 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade A accuracy class. The male connection is mounted on the lower back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use with paper machines and hydraulic presses.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organizati...

Manufacturer: Dwyer Brand: Dwyer

Pressure Transducer, Pressure Range 0 to 300 PSI, Accuracy +/-1%, Output 4 to 20 mA DC, Power Required 13 to 30 VDC, Process Connection 1/4 In MNPT, Material of Construction Stainless Steel, Housing Stainless Steel, Operating Temp 0 to 200 F, NEMA Rating 4X, Connector Type Mini Hirschman, Loop Resistance 0 to 1300 Ohms, Max Pressure 600 PSI, Thermal Error +/-0.02%

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS40-III

10:1 Voltage probe with safety-designed shrouded 4mm test pin, for use with 120 Series ScopeMeter. Hook clip (Red) and ground lead included. The shrouded 4mm banana test pin makes this probe also compatible with standard safety-designed alligator clips. Set contains 600V CAT III / 1000V CAT II rated items: 10:1 voltage probe (1 black), hook clip (1 red) (HC120-III), ground lead with mini alligator (1 black). Attenuation 10x. Bandwidth DC to 40 MHz (-3 dB). Maximum input voltage 600V CAT III / 1000V CAT II as per IEC61010-031:2008. Input resistance/capacitance, 5 mega ohm / 15.5 pF. Compensation fixed for ScopeMeter 120 series (14 pF). Safety-shrouded 4 mm banana pin with test probe tip. Instrument connector 4mm shielded banana plug. Cable length 1.2m. Safety IEC / EN 61010-031:2008; UL61010 B-2-031; CSA C22.2 No. 1010.2.031. Pollution Degree 2. Protection Class II (double insulation). Black color. UL Listed.