Pressure & Vacuum - Page 244

Manufacturer: Guardair Brand: Guardair Model: 74BH024Z

Specifically designed to clean out blind holes in metal, wood, and plastic work pieces. Delivers a high velocity jet of air into deep crevices and blind holes to flush out chips and dirt. Proprietary, protective air cone shields against dangerous "chip fly-back." Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort.

Manufacturer: NAHVAC Brand: Aftmk Replm for York

This is a Brand New Gas Furnace Air Switch

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG32J39M1

This Square D Pumptrol 9013FHG32J39M1 air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 135 psi. The switch has a 1/4" NPSF internal fluid connection and is suitable for use with a higher-horsepower motor with 2 hp or greater. The non-adjustable differential is 30 psi, and the adjustable cut-out range is 70-150 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. The maintained manual cut-out lever has auto and off positions. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FYG2J21M1

This Square D Pumptrol 9013FYG2J21M1 electromechanical pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 2 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. The maintained manual cut-out lever has auto and off positions. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: DuraChoice Brand: DuraChoice Model: PS404L-300

4" All Stainless Steel Oil Filled Pressure Gauge - 1/4" NPT Lower Mount 300PSI

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MPR1-0

The Series MPR Miniature Pressure Regulators are compact units that provide low cost, high performance pressure regulation of compressed air or air/water. The low torque, non-rising adjustment knob with locking capability provides easy and precise adjustment. Models for use with air are self relieving. Models for air/water are non-relieving.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MPR2-0

The Series MPR Miniature Pressure Regulators are compact units that provide low cost, high performance pressure regulation of compressed air or air/water. The low torque, non-rising adjustment knob with locking capability provides easy and precise adjustment. Models for use with air are self relieving. Models for air/water are non-relieving.

Manufacturer: Industrial Grade Brand: Industrial Grade

Pressure Switch, High, Switch Type SPST, Switch Action Open on Rise, Range (PSI) 150-700, Open (PSI) 610, Differential Pressure (PSI) 610, Manual Reset, Pressure Connection 1/4 In Female SAE, Capillary Length (In.) 18, Universal Mounting, NEMA 1 Enclosure, For Refrigerants R 12, R 22, R 134A and R 502

Manufacturer: Anfield Sensors, Inc. Brand: Anfield Sensors Model: SKBA-4-4M-A-SP

The SKBA Anfield Sensor's switch series is a miniature pressure switch with high proof pressures ideal for mobile and other harsh applications. It is a well sealed design and is great for industrial tool, garbage truck, brake pressure switch and many other applications

Manufacturer: Trerice Brand: Trerice Model: 885-4.1

885 Series Coil Syphons are designed for use on steam service to form a pocket of water between the pressure gauge and the process steam, thereby preventing the steam from reaching the bourdon tube of the pressure gauge. Trerice Coil Syphons are constructed of steel, brass, or 304 stainless steel with a 180° coil for use on a variety of requirements. Other materials and coil styles are available; consult factory.