Pressure & Vacuum - Page 250

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Board Mount Pressure Sensors 100 PSIG GAUGE

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 351490A02L300IW Color: Black

The Ashcroft Type 1490 low pressure diaphragm gauge is designed to measure pressure from 10 in. H2O to 15 psi, both positive and negative pressures. This gauge uses a very sensitive diaphragm capsule to measure low pressure and vacuum. The gauge is specifically designed for use whenever the pressure medium is a gas that is not corrosive to beryllium copper, brass, polysulfone and RTV silicone. The polysulfone case is suitable for intermittent or continuous service on natural gas provided a .013 throttle plug is installed in the socket. Typical applications are, but not limited to, vacuum pumps, gas leak detectors, air compressors, air filters, gas burners, gas measurement, vacuum ovens, suction regulators and respirators.

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH

Manufacturer: CME Tools Brand: CME Tools

1-2" x 0.001" SCREW THREAD MICROMETER WITH 5 PAIRS OF V-SHAPED, KNIFE-EDGED AND POINTED ANVILS. SIZE OF ANVILS: 5 X 15 MM. FRICTION THIMBLE, RATCHED STOP, ROTATING SPINDLE. RESOLUTION: 0.001"

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-911-30-vac/kPa

The NoShok 900 series stainless steel 304 case pressure gauge has brass wetted parts, a liquid-filled circular dial, a variety of connection types available, and measures pressure with a dual scale with an accuracy of + or - 1% or 1.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The dial is 2.5" (63 mm) or 4" (100 mm) in diameter and enclosed in a stainless steel 304 case for corrosion resistance. The gauge has a safety relief disc on the top of the case. The lens for the 2.5" gauge is polycarbonate for high impact resistance. The lens for the 4" gauge is instrument glass for strength and clarity. The dial is filled with glycerin and water for protection against vibration and pulsation. The dial has a white aluminum background with black and red markings and is UV resistant. The 2.5" gauge has a molded plastic pointer. The 4" gauge has a balanced aluminum pointer with a black finish. The gauge measures pressure with a dual scale in psi/kPa, Hg. vacuum/kPa, bar/psi, or Hg. vacuum/bar. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade A accuracy class. The 4" gauge is accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. The male connection is located on the bottom or center back of the gauge and is available with a 1/4" NPT (National Pipe Thread) rate, a 1/2" NPT rate, a 1/4" British Standard Pipe Parallel thread (BSPP) rate, or a 7/16" to 20" adjustable 1/8" rate. The movement is brass and nylon with highly polished bearing surfaces. The bourdon tube is phosphor bronze C-Type for gauges with up to 600 psi and a coiled safety tube for gauges above 600 psi. The gauge operates in fluctuating pressure up to 60% of the dial range and in static pressure up to 90% of the dial range. The ambient temperature for the gauge is -4 to 140 degrees F (-20 to 60 degrees C). The media temperature range is -4 to 140 degrees F (-20 to 60 degrees C). This pressure ga...

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors 250psi, 1/4in-28 UNF PCB, 10 Vdc, Differ

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors No Port, SMT 15 psi,Absolute,3.3V

Manufacturer: United Electric Controls Brand: UNITED ELECTRIC CONTROLS

Manufacture: United Electric Controls  Type: J6D Model: 274 Range: 0-300 PSI Adj. 7945 Amps: 15A Volts: 125/250 VAC  1/8 HP-125 VAC 1/4 HP-250 VAC

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors Dip,Dual Radial Barb 1psi Gage, 5V

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors 20PC