Pressure & Vacuum - Page 252

Manufacturer: All Sensors Brand: All Sensors

Board Mount Pressure Sensors 0-20in 4.5to5.5V Gauge

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF450-212-100-ST

ACCUVAC TECHNOLOGY Zero Length Reducer.The manufacturer is ISO registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Winters Brand: Winters Model: PFQ1546

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: 2L inc. - Engraving Tools, End Mills & Cutters, Va Brand: 2L inc.

2L inc., #11120 Adjustable Vacuum Pressure Switch, Vacuum 5 - 30 in Hg. Made in the USA. Adjustable Vacuum Pressure Switch has both Normally Open and Normally Closed Quick Connect Terminals. Simple to adjust Vacuum Switch with one thumbscrew. Tight repeatable deadband for consistent operation. 10-32 vacuum port. Two Mounting Holes for #6 SHCS. - Includes One Push to Connect 1/8" Tubing to 10-32 Connector. - Includes Three Fully Insulated 14/16 Gauge Wire - 2.8mm (0.110") Quick Disconnect Connectors. Vacuum Range: 5 - 30 in Hg. - Hysteresis / Deadband: 0.5 in Hg. - 2.5 in Hg (Average = 1.0 in Hg). Electrical Rating : 5A 125-250VAC , 1A 48VDC. - Terminals: Quick Connect 2.8 x 0.5mm (0.110'). - Electrical Switch Approved according to EN 61058 and UL 1054. - Ambient temperature -40 to max. +100 °C.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 5025

Piston type pressure snubber. It resists clogging and are self cleaning. Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application. Grade A and B pistons are applicable for Gases, grade B and C for Water, grade C and D for Light Oil, and grade E for Heavy Oil. Made of 316 stainless steel 1/4" NPT male. 0.812" Hex. 0.56" Thread length. 1.60" Height.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 451134EDRQMXCYLM6IW

The Type 1134 uses a convoluted-diaphragm design with no migration of the process media. It is recommended for low differential inches of water ranges. Body material is glass filled nylon with Buna or silicone.

Manufacturer: All Sensors Brand: All Sensors Model: DLVR-L02D-E2NJ-C-NI5F

Board Mount Pressure Sensors +/-2 inH2O Opp Side J-Lead SMT 5V

Manufacturer: All Sensors Brand: All Sensors Model: DLVR-L60D-E2NJ-C-NI3F

Board Mount Pressure / Force Sensors +/-60 inH2O Opp Side J-Lead SMT 3.3V

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ISO-80-300-N

Acuvac Tehcnology ISO Flanges are precision machined from cross forged SS304 Stainless Steel Plate with Surface finish of 32 micro-inches or better. These Flanges can be baked to 200 Deg C and have a Vacuum range of up to 10 to -8 torr. Some of the applications are Vacuum Chambers, manifolds, Valves, Pumps, and a Variety of Experimental Devices.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series MDPC is a slim, gas pressure sensor that is small in size and light in weight. This pressure controller supports many installation methods and features high measurement accuracy. This small controller yields excellent stability, high shock and vibration resistance. The MDPC also provides good over-load capacity and heat resistance. It can be utilized in many industries such as: high-tech electronics, general processing, food packaging, and automatic assembly. The MDPC features 6 user selectable pressure units and a large, LED 3-color display with selectable color options that allow for easy reading. Changing units is simple, and by using the included unit sticers, the pressure unit displayed becomes very clear. The fast parameter copy function makes copying parameters to other MDPC pressure controllers effortless. The key lock mode also prevents any unnecessary changes to the parameters, which can have an effect on the operation. Another characteristic of this multi-talented pressure controller is its ability to detect both positive and negative pressure. The MDPC is available in NPN, PNP, analog voltage or current output control modes.