Pressure & Vacuum - Page 255

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Industrial Pressure Sensors 300 PSIG/A

Manufacturer: CME Brand: CME Tools

3/8" M42 8% cobalt Tialn coated roughing end mills 10pcs for $89.00 3/8"(dia.)x3/4"(flute length)x2-1/2"(OVL) 4flute

Manufacturer: ASCO Brand: Asco

ASCO PC21B Tri-Point Pressure Switch

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 400-1-2-15/225-8

With a stable switching point setting, the robust 400 Series Switch converts pneumatic and hydraulic pressure into switching functions, and is designed for applications requiring maximum accuracy under high loads. It is SPDT, and can be normally open (N.O.) or normally closed (N.C.) depending on the wiring. The switching point is fully adjustable by means of a simple adjustment knob within the adjustment range. It also includes a locking mechanism for switch point adjustment. The 400 Series Switch is fitted with DIN EN 175301-803 Form A connectors for fast and easy installation. It is also available with an LED indicator on the plug for visual monitoring of the switch status, or an M12 x 1 (4-pin) electrical connection. Easy to adjust. Applicable for hydraulic systems, including mobile hydraulics, pneumatic systems, power generation, pumps and compressors, marine. NBR diaphragm is less than or equal to 230 psig, Stainless Steel piston with NBR seal is greater than or equal to 500 psig. Diaphragm type, compressed air or non-corrosive liquids Piston type, self-lubricating fluids such as hydraulic oil or grease. SPDT, micro switch with silver plated self cleaning contacts. Diaphragm type, 1 to 11 range of adjustment range full scale, Piston type, 2 to 8 percent of adjustment range full scale. Maximum 200 cycles per minute. Up to 28VDC - max 4A Up to 250VAC - max 3A contact rating. 13 to 185 degree F storage temperature, 14 to 176 degree F media and Ambient temperature. Hirschmann (DIN EN 175301-803 Form A) electrical connection. 30g's per IEC 770 Shock, 10g's per IEC 770 Vibration. NEMA 4: IP65 for Hirschmann Environmental Protection. Acc. to EU Standard 73/23/EWG CE Certification.

Manufacturer: Midwest Instruments Brand: Midwest Gloves

Midwest Instruments Pressure Gauge 120Sa-10-00 1.75Bar (4695)

Manufacturer: Winters Brand: Winters Instruments Model: PPC5062R1

The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...

Manufacturer: Amphenol Advanced Sensors Brand: Amphenol Advanced Sensors

Industrial Pressure Sensors 1000 PSIA/S

Manufacturer: Honeywell Brand: Honeywell

Board Mount Pressure Sensors +/-10 IN H2O BARBED DIFF,VAC GAGE 3VDC

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1223-M300-D

These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Columns are of .375" O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.

Manufacturer: CME Brand: CME Tools

PULL-TYPE DESIGN FOR UP TO 80% LESS DEFLECTION. ALL SIDES FLATNESS TO 0.0001" ACCURACY BOTH SIDES, SQUARE TO BOTTOM 0.0004" PARALLEL TO EACH OTHER TO 0.0008" CAN BE MOUNTED ON SIDE OR BASE BOTTOM KEYWAY ATTACHMENT TO LOCK AND POSITION THE VISE ON YOUR TABLE SLOT ACCURATELY. MAX. JAW OPENING: 4" JAW WIDTH: 4" JAW HEIGHT: 1-3/8" Overall height: 3-5/8" O.A.L: 11". CLAMPING FORCE: 9,000LBS