Pressure & Vacuum - Page 259

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF600-450-250-BT

ACCUVAC TECHNOLOGY Zero Length Reducer.The manufacturer is ISO 9001-2008 registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: CME Tools Brand: CME Tools

Manufacturer: Schmalz Brand: Schmalz

Miniature vacuum switch with digital output signal VS-V-SD 60 M5-AG Switching point: - 600 mbar Connection: M5-M Measuring range: -1...0 bar Cable length: 3 m

Manufacturer: CME Brand: CME Tools

3/4" M42 8% cobalt Tialn coated roughing end mills 5pcs for $119.00 USA free shipshipping 3/4"(dia.)x1-5/8(flute length)x3-3/4"(OVL) 4flute

Manufacturer: CME Brand: CME

* 10pcs 5/16 x 13/16 x 2-1/2 Tialn coated solid carbide end mills 4flt, s/e center-cutting Micro-grain, 10% cobalt

Manufacturer: UNITED ELECTRIC CONTROLS Brand: UNITED ELECTRIC CONTROLS Model: 12947

United Electric Controls 12947 Pressure Switchtype J6drange 0-200 Psi / 0-1,4 Mpa15 Amps277 Vac

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07E44A15AC

This Parker 07E44A15AC compact filter/pressure regulator combination or "piggy-back" is part of the Prep-Air II series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 40 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a metal bowl for strength and durability, a twist drain, and a sight gauge for checking pressure. This element/regulator has an operating pressure range of 5 to 250 pounds per square inch gauge (psig) and a high-flow 3/4" National Pipe Thread (NPT) port for a flow rate of 90 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Our low cost SERIES 668B/D Compact Differential Pressure Transmitters are capable of sensing differential gage pressure with ±0.8% FS accuracy, and converts this pressure difference to a proportional high level analog output for both unidirectional and bi-directional pressure ranges. These transmitters can withstand up to 15 psig overpressure with no damage to the unit. The compact, lightweight design makes installation simple and easy. Units are protected against incorrect wiring, and include a protective terminal cover. (Picture shows standard model).

Manufacturer: Winters Brand: Winters Model: PLP314

The Winters PLP series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case, and a male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement for the 2.5" gauge is an engineering plastic upper and lower plate with brass pinion and sector. The movement for the 4" gauge is brass. The welding is brazed solder. The over-pressure limit is 30% of full scale value. The gauge operates in fluctuating pressure up to 60% of full scale value and status pressure up to 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. F...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-510-30/15-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...