Pressure & Vacuum - Page 26

Manufacturer: Test Products International, Inc Brand: TPI Model: 620

Temperature compensated to ensure repeatable measurements; Over-pressure protected to 200 in H2O. Dual input enables differential measurements. Autoranging provides high resolution and accuracy at low pressure where it is needed. Record/min/max. Trim mode to stabilize readings. -15 to 48 in H2O range. +/- 1/2 percent of reading + 5 digits accuracy. 0.01 in H2O resolution. 500 mBar over pressure. 9V power supply. 0 to 80 percent relative humidity. 32 to 104 degree F operating temperature. After 40 minutes auto power off. Adjusting appliance regulators. Setting delivery pressures. Leakage "shut-in" tests. Regulator adjustments for pressure and lock-up tests. Test pressure switch operation on a 2-stage gas furnace in both positive and negative pressures. Static pressures in air ducts for air balancing. Check air filters by measuring pressure drop. RoHS compliant.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS212-G Color: Gray

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 18 pF. Compensation range: 10 to 30 pF. Cable length: 2.5m. Color: grey. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS210-G Color: Gray

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. One gray. UL Listed.

Manufacturer: Weiss Instruments Brand: Weiss Instruments Model: DUGY3-015-4L

Weiss Instruments light powered digital process pressure gauge is attributed to their high level of quality and reliability as well as an understanding about the impractical nature of changing batteries in industrial applications. Less than 10 Lux rating. Case: 4-1/2-inches black glass reinforced thermo plastic (PBTP) solid front construction, blow out back safety design, weatherproof IP65. Window: acrylic. Sensor: gold plated ceramic, Kalrez (chemically resistant) O-Ring seal. Wetted materials: stainless steel 316. Accuracy: 0.5 percent full scale ASME 40.7 AA (0.25 percent available consult factory) Ambient operating: 10 to 140 degrees F. Display resolution: 1/4 percent.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: BC7217

External Battery Charger, For Graphical Multimeter

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG40CTC15P21

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.

Manufacturer: Allen Bradley Brand: Allen-Bradley

PRESSURE SWITCH Pressure Switches: Switch Type - Pressure Control; Operator Type - Bellows; Pressure Media - Air, Water, Liquids, Gases (non-corrosive); Circuit - SPDT; Contact Rating - 240V 5A, 600V 3A; Operating Range - 4-150 psi; Line Pressure - 300 psi Max; Occasional Surge - 375 psi Max; Enclosure Rating - NEMA 1; Connection - 1/4" NPTF; Additional Information - Bellow Material: Copper Alloy, External ; Manufacturer Series - 836C

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07E44B18AC

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-414D/62MAX+

FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER