Pressure & Vacuum - Page 277

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FYG2J33P

This Square D Pumptrol 9013FYG2J33P electromechanical pressure switch with 50-70 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 2 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. This switch includes a copper pulsation plug. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: TEXAS INSTRUMENTS Brand: Texas Instruments

TEXAS INSTRUMENTS TL7705ACDG4 VOLT SUPERVISOR, SMD, 7705, SOIC8

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 443-182C

This specialized Four-Position Temp-Plate is for monitoring overheat conditions directly on the surface of integrated circuits during wafer fabrication. Designed to withstand exposure to high heat, vacuums and corrosive gases when used in the demanding semiconductor industry.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG19J39M1X

This Square D Pumptrol 9013FHG19J39M1X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 135 psi. The switch has a 1/4" NPT external fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp or less. The non-adjustable differential is 30 psi, and the adjustable cut-out range is 70-150 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. The maintained manual cut-out lever has auto and off positions. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MDS-14

The Series MDS Pressure Switch is designed with a double diaphragm to protect false actuation due to shock and vibration. This low cost pressure switch has a minimum 20 million cycle life expectancy, and an extremely fast response time, making this an ideal device for OEM orders.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50702459

The WIKA Commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in an acrylonitrile butadiene styrene (ABS) plastic case for durability in high-impact environment. The gauge measures pressure up to 5,000 psi. It is accurate to a variety of percentages across the entire range of the gauge, depending on other features. Accuracy ranges are + or - 2.5 percent of span; or, + or - 3/2/3 percent of span over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) Grade B accuracy class. The male connection is available as either a lower mount, a center back mount, or a U-clamp mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for general applications in non-corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temp...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: SFI-500B-2

Tough, tempered glass window resists chemical attack and abrasion. Seamless gasket assures perfect seal and is easily field replaceable. In addition to the standard brass body, Model 500 Sight Windows are also available in carbon steel or 316 stainless steel to suit a wide range of chemical compatibility.

Manufacturer: Winters Brand: Winters Instruments Model: SSP545

The Winters SSP series schedule 40 brass syphon has a seamless 180-degree coil, and a male connection with either 1/4" or 1/2" NPT rate, and operates in pressures up to 500 psi (3,447 kPa) at 680 degrees F (360 degrees C). The syphon, also known as a siphon, is brass for operating in non-corrosive liquid and gases, and is seamless for additional strength. The male connection is either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. This syphon prevents hot steam from entering a pressure gauge, diaphragm seal, or transmitter in applications with temperatures above 100 degrees F (37 degrees C). Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.Winters Instruments manufactures pressure gauges, thermometers, diaphragm seals, pressure transmitters, and switches. The company, founded in 1953, is headquartered in Toronto, Canada.

Manufacturer: Square D Brand: Pumptrol

Designed for the control of electrically driven water pumps. Diaphragm actuated. Type FSG is the standard water pump switch, suitable for all types of pumps: jets, submersible, reciprocating, etc.

Manufacturer: ANALOG DEVICES Brand: ANALOG DEVICES

ANALOG DEVICES ADM6315-26D3ARTZR7 SUPERVISOR CIRCUIT, MPU, #1, SOT-143-4