Pressure & Vacuum - Page 282

Manufacturer: Winters Brand: Winters Model: PFQ2314

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2060

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH

Manufacturer: Shenzhen TEREN Control Technology Co., Ltd. Brand: TEREN Model: DPTL320

 Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure  It can measure fan and blower pressures, filter resistance, air velocity, pressure drop across orifice plates, differential pressure of medical or pharmaceutical machine, etc.  Multiple ranges, engineering units and outputs.  Good performance with accuracy of 1.0%  Function keys: zero calibrate, unit select, response time set, etc

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors PRESSURE SWITCH

Manufacturer: Honeywell Brand: Honeywell

Industrial Pressure Sensors TRANSPORTATION PRESSURE SWITCH

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1211-16

The Dwyer 1211 series slack-tube roll-up manometer measures static, vacuum, and differential pressure of air and gas in fan and blower tests, gas pressure evaluation, and calibration applications. The manometer has an acrylic plastic top, connectors, and over-pressure traps for use with testing air and gas, and vinyl tubing for use with mercury (sold separately) or water with fluorescein green concentrate (sold separately). The manometer is calibrated in inches of water using water and is suitable for use with mercury or water with fluorescein green concentrate measuring fluids (sold separately). The connectors accept 1/8" tubing and can be turned to seal the fluids during storage or transport. The flexible spring-steel scale is mounted between the columns to eliminate parallax reading errors, and the 2" sliding zero adjustment provides zeroing capability. The manometer has a maximum intermittent total pressure of 50psi and vacuum up to 20 inHg. The manometer can be hung or mounted using the attached magnets.SpecificationsPressure typesStatic, vacuum, and differentialMedia typeAir and gasWetted parts materialAcrylic plasticCase materialVinyl tubingScaleInches of water, inches of mercuryPressure rangeVariesFluid typeWater colored with green concentrate or mercuryConnection1/8"MountMagnetic clipsMaximum pressure50psi, intermittentlyMaximum vacuum20" Hg (10" Hg absolute), intermittentlyMaximum temperature130 degrees FH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an abso...

Manufacturer: Kavlico Brand: Kavlico

Board Mount Pressure Sensors PCB mount pressure sensor 5" H2O, 0.25 - 4 Vdc output

Manufacturer: TanNen technology Brand: TanNen technology

Package included: 1 x Digital Shore Hardness Durometer TYPE A 1 x Hard carrying case with hardened foam 1 x English Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO EARTH STAKE

The Fluke GEO earth stake is used with Fluke 1623 and 1625 earth ground testers to measure the ability of the earth ground system or individual electrode to dissipate energy from the site. The auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp. The stake has a corkscrew end to bore into the ground. The Fluke GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.