Pressure & Vacuum - Page 286

Manufacturer: Winters Brand: Winters Instruments Model: PFQ772R1

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Mercoid Control Brand: Mercoid Control

Mercoid Control PG-2-P2 Pressure Control Switch 120VAC~6A, 240VAC~3A, 15PSIG

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50533843

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: Winters Brand: Winters Instruments Model: SSN530

The Winters SSN series stainless steel 316 snubber has a sintered, porous stainless steel 316 snubbing element, a male x female connection, comes in three standard viscosity classifications, and operates in pressures up to 20,000 psi (413,700 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. The sintered, porous 316 stainless steel snubbing element has a large surface area to ensure long-term effectiveness. The snubber is available in the three standard viscosity classifications of heavy oil, water, and air. The male x female connection is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The burst pressure is 60,000 psi (413,700 kPa). The working pressure is a maximum of 20,000 psi (137,900 kPa). The operating temperature is -320 to 1,500 degrees F (-195 to 815 degrees C). This snubber suppress the effects of pressure pulses and pressure peaks to lessen the damaging effects of pulsation on gauges, transducers, transmitters, manometers, and pressure switches.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vesse...

Manufacturer: Pentax Brand: Pentax

Pentax TS 10x25 Binocular 88046 Binoculars

Manufacturer: ASCO Brand: ASCO Tri Point

ASCO Tripoint Fixed Differential Pressure Switch Standard Switch Rating 0.4 amps 125 VDC 5 amps 125, 250, VAC ¼ HP 125 VAC, ½ HP 250 VAC Option F and J Switch Rating- 5 amps 125, 250 VAC 1/8 HP 125 VAC, ¼ amp 250 VDC Option G Switch Rating- 5 amps 125, 250 VAC ¼ HP 125 VAC, 1//2 HP 250 VAC 1 amp 125 VDC, ½ amp 250 VDC

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50676938

The WIKA differential low pressure gauge has a circular dial that is 4" in diameter and is enclosed in a thermoplastic case with a polycarbonate window for increased durability in low temperature environments. The gauge measures pressure from 0.02 to 50 inch water column (inWC) and is accurate to + or - 3 percent of span over the entire range of the gauge. The female connection is a hosed barb that is made of plastic for increased durability. The gauge can be mounted and dismounted easily without the use of tools. The low pressure gauge is suitable for measuring differences of pressure in isolation chambers and for monitoring blowers and ventilators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards...

Manufacturer: Nason Brand: Nason Model: CJ-2C3-70J/HM

The Nason CJ series low pressure switch is perfect for OEM applications looking for a low cost pressure switch with durability and easy adjustability. The CJ series is field adjustable, has a 10-20% differential, has a 9.4mm DIN connector (Mini DIN) and is Nema 4 rated.

Manufacturer: All Sensors Brand: All Sensors Model: DLVR-L60D-E1NS-C-NI5F

Board Mount Pressure / Force Sensors +/-60 inH2O SameSide SIP 5V

Manufacturer: Fluke Brand: Fluke Model: FLK-PC3000 FC

' PC Adapter, For Use With FC3000 Series Multimeter , FC Series Modules, Features Wireless Communication, Includes Windows Software CD, Manufacturers Warranty Length 1 yr. '