Pressure & Vacuum - Page 344

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-392

A wide variety of fittings for use with most Dwyer products. Special line filters for the Magnehelic Gage and Capsuhelic Gage allow use with dusty environments. Particulate filters are used for Dwyer Flowmeters to keep the air clean. The Muffler Accessory can be easily field installed to any diaphragm valve with an exhaust. Pneumatic exhaust ports are on the diaphragm valves that have dual diaphragms and the units with the integral mounted solenoid. The muffler decreases the amount of noise when the air is exhausted from the valve. Valves with dual diaphragms and an integral solenoid have two exhaust ports and will require one A-237 and one A-238.

Manufacturer: MULTICOMP Brand: Multicomp Model: PSF102-7651-713-MULTICOMP

MULTICOMP PSF102-7651-713 PRESSURE SWITCH, SPST-NO, 2.17PSI

Manufacturer: BQLZR Brand: BQLZR Model: N19992

Note: The color of the item may vary slightly due to photography and your own computer Features: 1.It has good long-term stability. 2.Repeat consistent. 3.It is easy to install in small space because of the small volume. Material: Stainless steel Product Size:85 x 23mm/3.3" x 0.9"(L x Outer Dia) Range: 0-16 Bar Accuracy: ± 0.5% Power supply: 24VDC (9-32VDC) Output signal: 4-20mA Zero drift: ± 0.02% F.S./Celsius Repeatability: ± 0.09% Operating temperature: -40 ~ 105 Celsius Overload pressure: 150% F.S Load Resistance: 500Ω12 ~ 32VDC Connector: G1/4 Weight: 116g Package include: 1 x Pressure Transmitter Output

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-298

Dwyer Instruments, Inc., A298, MOUNTING BRKT FOR FLUSH MOUNTING, MOUNTING BRKT FOR FLUSH MOUNTING

Manufacturer: ERP Brand: ERP

Cliplight 301 Valve Core Removal Tool. Effective removal and replacement of the valve core from a service valve on a charged refrigeration system. Features superior grip and dual o-rings for maximum sealing. Angled design allows for greater flow for faster recovery and charging.

Manufacturer: US Gauge Company Brand: US Gauge Company

This offer is for a new, brass heavy duty 30# air gauge made by a top USA company "US air gauge". This is a black painted brass gauge with a 2 1/2" glass face and 1/4" NPT bottom mount. 30# broken down into 1 pound increments with an easy read dial. Heavy duty for heavy applications like welding torch sets, compressors or anywhere else a heavy air gauge is needed. Gauges like this aren't commonly made anymore and they are selling it cheap. Limited quantities.

Manufacturer: NAHVAC Brand: Aftmk Replm for Intertherm

This is a Brand New Gas Furnace Air Switch

Manufacturer: NAHVAC Brand: Aftmk Replm for MPL

This is a Brand New Gas Furnace Air Switch

Manufacturer: General Wire Spring Brand: General Pipe Cleaners Model: R-25SM

It's a cleaner way to clear clogged drains. The Spin-Thru contains a 25 feet by 1/4” (6 mm) spring that’s fed out of the drum into the line, keeping it away from clean kitchen and bathroom surfaces. There is a “T” grip handle for more convenient use in laundry tubs and other hard to reach drains. Complete directions on back of card.

Manufacturer: Schneider Electric Brand: Square D by Schneider Electric Model: 9013FHG42J59X

This Square D Pumptrol 9013FHG42J59X air-compressor pressure switch controls an electrically driven air compressor in a power circuit when the adjustable threshold upon falling is reached and is set to turn off at 175 psi. The switch has a 1/4" NPSF internal fluid connection and is suitable for use with a lower-horsepower motor with 1.5 hp or less. The non-adjustable differential is 40 psi, and the adjustable cut-out range is 100-200 psi. The switch is diaphragm actuated and has a fixed differential. The threshold, or setting point, upon rising adjusts with a screw nut. The switch has screw terminal electrical connections, and two 2-pole NC contacts open on rising pressure. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. This switch includes a 2-way pressure release valve. Square D Pumptrol pressure switches are manufactured by Schneider Electric.